Group American Car Service

WORKOUT ANYTIME in Journal & Topics Newspapers

WORKOUT ANYTIME in Journal & Topics Newspapers in an article titled, “New 24-Hour Fitness Facility Opens In Buffalo Grove.” The article begins with information about the new club and then gives some details about the grand opening. The article ends with information on WORKOUTANYTIME’s plans for expansion in Illinois and some background on Jeff.  Click here to read more or begin below.

New 24-Hour Fitness Facility Opens In Buffalo Grove

A new 24-hour fitness facility recently opened in Buffalo Grove.

Workout Anytime opened at 700 Buffalo Grove Rd. The facility is open 24 hours a day to members with staff on site from 9 a.m. to 8 p.m. weekdays; 9 a.m. to 5 p.m. Saturdays; and 10 a.m. to 2 p.m. Sundays. Members receive a special key card to unlock doors when staff is not present.

(Read More)

My Trip to Vietnam

I am on my way to Vietnam for an organization capacity assessment of a multilateral organizations’ branch office as well as their partners. I had few tense moments in getting my visa on time but everything worked out. This will be my third trip to Vietnam; my first trip was back in 2005, my second trip was in 2007.

The first trip was to train the senior management of the largest ministry in Vietnam on Sector Wide Strategic Planning. I recall that my liaison officer was very hospitable and took me around Hanoi every night. I had to sample the snails, frog, cat and dog in a variety of restaurants, washed down with copious amounts of snake wine. It was one of the most memorable assignments for me and I made a lot of friends there.

My second assignment in Vietnam was to train and conduct an organization capacity assessment along with the senior management of a ministry in PDR Lao. As a perk to the staff the training was moved from Vientiane, Lao to Hanoi, Vietnam.

Doing a Strategic Plan / Organization Assessment in a communist country is quite different. There is no Institutional landscape for you to influence or lobby. There is the communist party line and laws and statues based on them; everyone has to live within these boundaries. Influencing and lobbying can be considered political subversion and it is not practiced by organizations. Even when dealing with the private sector you and your competitors have to live and operate within these bounds. It can be argued that this is indeed a very controlled level playing field.

I am looking forward to doing this assignment.

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

Matryoshka House was designed by architect David Jameson, is located in Bethesda, Maryland, USA. Obeyng unwritten rules concept Matryoshka, the house consists of a series of volumes is one inside the other. According to ‘description’, architects, in essence, a meditation room with suspended center acts as the physical and spiritual for the project. The internal energy market of the meditation room locked in an open, bright. Alternating tread stairs rise participant commits deliberatley eve of the meditation room. The meditation room is surrounded by a wooden container that surrounds the living area of ​​the house. Traditional decorations in turn should have soothed by stucco walls act as a protective layer and ground floor of the house. In-between space of nested volumes strategic cup sun to protect lines of light inside.

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY DINING ROOM

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL MEDITATION ROOM

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL MEDITATION ROOM

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY BATHROOM

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY BATHROOM

WTH ? How do both front tires blow up simultaneously?

for the original version, click though on the video below, which will only play on youtube itself

After a review, the team discovered a suspension arm defect led to the entire right front upright collapse, which snapped the wheel tethers and created the dramatic effect

And More: Deals and Sales – Black Friday Weekend 2013 Deals Are On Now


I don’t usually talk about current sales/promotions on this site [or haven’t so far], but after seeing all of the sales on out there, I had to make a quick post just to say that there are some great deals on now! 

Even if you don’t live in the United States (for instance, I’m in Canada [eh]) you can still take advantage of them, as most electronics and entertainment companies are on the Black Friday/Cyber Monday weekend bandwagon, with tons of purchases available online – and it’s all “nuthin’ but good” for gamers… Steam, Origin, Gamefly and other digital gaming distribution platforms are all chock full of great sales, as is Amazon, TigerDirect, MemoryExpress and other local and online hardware stores, allowing you to finally get that Upgrade you’ve been wanting, should you decide to jump on a deal out there.

Some examples of games on sale are below; but whether you buy a few games this weekend or save your money and just play with the new influx of players in your own favourite online game – I hope you enjoy your weekend and have some fun:

An example of the Black Friday Weekend Sales for 2013 on Steam

A small example of the Black Friday Weekend Sales for 2013 on Origin

An example of the Black Friday Weekend Sales for 2013 on Gamefly

See You In The Games!

Fabulous Fiber!

Everyone has heard that they need to eat fiber, but few people really know what it is and why it is so important.     Fiber is a form of carbohydrate along with sugars and starches.      Unlike sugars and starch fiber cannot be used for energy because it cannot be broken down into sugar.     Starch and sugars both end us as blood sugar aka glucose.
Starches are simply multiple units of sugar hooked together, and we have enzymes that break them apart so we can use the sugar for fuel.   Fiber is also multiple units of sugar hooked together, but humans lack the enzymes necessary to break it down into sugars so it is not absorbed.    This is very important when thinking about carbohydrate containing foods because they are NOT all the same.
For example, a glass of fruit juice is essentially a glass of sugar water with some beneficial plant chemicals and in many cases a nice dose of vitamin C.    It can dramatically boost blood sugar, and if you consume too much it can definitely drive weight gain.     While a large serving of brocolli is mostly fiber with little sugar and starch and is also chock full of beneficial plant chemicals, but with almost no effect on blood sugar!
There are two main types of fiber – soluble and insoluble.    Ideally you want to eat both.   There is also a third type of fiber called “Digestive Resistant Starch” (see https://workoutanytime.blogspot.com/2017/10/digestion-resistant-starch-all-starch.html)
Soluble fiber, found in foods such as cucumbers, blueberries, and beans, has a gel-like consistency and slows down your digestion.     This helps with satiety (feeling satisfied).    It also slows the break down and absorption of cholesterol and other nutrients like starches and sugar which can help lower cholesterol and control blood sugar.    Some foods with soluble fiber also help feed the good bacteria in your digestive tract.
Insoluble fiberis found in foods like green, leafy veggies, green beans, and celery.    It does not dissolve to a gel and stays intact as it moves through your colon.   By adding bulk, it helps food move more quickly through your digestive tract reducing transit time.  Insoluble Fiber is sometimes referred to as “roughage”, and it along with soluble fiber can help with constipation.
Benefits of High Fiber Intake
Fiber intake is very important for keeping blood sugar levels under control, and studies have shown that people who take in at least 26 grams of fiber per day had a much lower risk of developing Type 2 Diabetes.
There is also an inverse relationship between fiber intake and heart attack, with research showing that people eating a high fiber diet have a 40 percent lower risk of heart disease.    High fiber diets may also help lower blood pressure.
Another interesting research finding about fiber is that for every 7 grams of fiber you consume each day your stroke risk is decreased 7 percent.      To put this into perspective this equates to about 2 servings of fruits and vegetables.
Fiber, and psyllium in particular, can help move yeasts and fungus out of your digestive system which may help prevent them from triggering acne and rashes.
Fiber can also provide relief from irritable bowel syndrome in many people.
Fiber intake may also help reduce the risk of gallstones and kidney stones probably through its action in controlling blood sugar.
Sources of Fiber
Contrary to popular opinion grains are probably not your best source of fiber.    Unfortunately, non-organic grains are chock full of glyphosate which is pesticide banned in most other countries outside the US because they have no allegiance to Monsanto who produces it.    
A high grain diet promotes insulin and leptin resistance thereby increasing your risk for Type 2 Diabetes, Heart Disease and Cancer. 
Better choices of fiber includes Organic Whole Husk Psyllium.     If you use this supplement it is critical to get organic psyllium as non-organic psyllium is heavily sprayed with chemicals.     Other great sources include chia seeds, berries, root vegetables such as sweet potato, peas and beans, mushrooms, broccoli, cauliflower, Brussel sprouts and celery.
How much fiber?
Experts recommend that woman eat a minimum of 25 grams of fiber per day and men consume 38 grams per day.     However higher intakes may be more beneficial.     
It is important to SLOWLY increase your fiber intake and keep your water intake high to prevent potential issues caused by eating fiber without sufficient fluid.
Low-Fiber Diet
There are circumstances where high fiber intake is contraindicated and timing for fiber intake relative to drugs and supplements is important.   People with chronic digestive issues may need to remove fiber for some period of time because fiber feeds the bacteria in your gut.    Although as a general rule this is highly beneficial there are circumstances where high fiber intake can feed the wrong microorganisms such as pathogenic bacteria.

Fiber can also bind certain medications and minerals dramatically reducing their absorption so many drugs and mineral supplements should not be taken at the same time as fiber.

My Trip to New Delhi & Hyderabad Cont………

My 4th OCA was done for an organization in Hyderabad and I experienced something I came across the last time I did an OCA in Hyderabad. Readers of my Blog may recall my last visit to Hyderabad and the post of 10/12/09. Talk about déjà vu it was very similar on this occasion as well, but the difference was that it was led by the senior members of the board, who were eminent individuals in their own right. (I am talking about an attempt by the organization to cover up facts that directly deals with their capacity during the OCA). What made it very unpalatable was that they gave a presentation on the history and activities of the organization and conveniently omitted these facts from the presentation. This to me is a bad sign and a major put off. The irony is that even with these capacity issues the organization is a relatively capable organization and can be developed to do better; and the purpose for the assessment is exactly to identify these gaps so that they may be able to qualify for a grant to develop their organizational capacity.

Other than this the rest of the assignment went as usual and finished the OCA by 4 PM on the 3rd of March. I went directly to the airport to take a flight to New Delhi for the 5th and last OCA. While waiting to board my flight I noticed a very weird thing. The displays at the Hyderabad airport that give flight departure details were giving a lot more information than it is logically required for passengers waiting to board flights. Let me explain; it starts with the information tag against the flights numbers as “Gate Open” and then as time goes by it proceeds to change the tags to “Final Call”, “Gate Closed”, “Boarding” and finally to “Departed”. In my experience this is the extent of the information which can be relevant to any passenger in the terminal and it stays for at least 10 to 15 minutes on the information board and then it is deleted from the board. However in Hyderabad Airport this is followed by another information tag saying “Airborne”; now who needs to know this? Does it mean that if you are late for the flight and that if the flight is not airborne they will put you on it? Don’t think so; as they say “gate closes 15 minutes before departure time”. Further given today’s security climate well-wishers are not allowed in the terminal. So go figure this one out.

Reverse Lunge with Diagonal Lift

Lunges are a fantastic functional lower body exercise, and the benefits can be enhanced by adding an upper body component to the basic lunge movement pattern. One of the most productive total body lunge variations is the reverse lunge with a diagonal lift.
The exercise improves hip mobility in the front of the rear leg, while also increasing strength and stability in the front leg and increasing core strength and mobility. Specifically, it improves hip flexor mobility while training the body to move smoothly in the spiral line. It also encourages proper tri-planar movement.
Start standing with feet shoulder width apart in upright posture. Hold a medicine ball, dumbbell, or kettlebell (or even a body bar) positioned at the right hip pocket region. Step back with the right leg to perform a reverse lunge. At the same time move both arms diagonally up and back over the left shoulder until a comfortable stretch is felt in the anterior (front) of the right hip. Do NOT allow the back to arch. Pause in this position for one or two seconds.
Do 10 – 15 repetitions on one side then repeat on the other side. It is important that you keep both feet facing forward and keep your trunk upright throughout the movement.
Regressions:
Perform the movement without a medicine ball, dumbbell, or bar
Start in the split stance lunge position instead of having to step back
Progressions:
Increase weight you are holding.
Perform the movement in an alternating side manner vs one side at a time.
Video Links: https://www.youtube.com/watch?v=JDyGhcm-aVs

TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

Raise your hand if you’re a fan of traditional interior design schemes. Because today we are proud to present a wonderful house of fascinating details are located in Gothenburg, Sweden. Seen on Skeppsholmen, the project has a nice open living room, which covers the dining room, as well as the terrace and garden. On the second floor above the living room is furnished with a bedroom in the attic, and storage facilities well. Basement can accommodate storage / boiler room and laundry area with washing machine. The entire house is a charming and traditional, because of the presence of many moving parts in wood and other interesting colored decorations. We invite you to explore all and be inspired!

TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS BEDROOM CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS BEDROOM CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS KITCHEN CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS KITCHEN CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS BATHROOM CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS BATHROOM CHARMING HOME IN GOTHENBURG

The Incredible Pistol Squat

The pistol squat requires mobility and strength from the entire lower body and core, and once you work up to being able to complete them you can get a great lower body workout anywhere with no equipment. 
Most people will not be able to perform the pistol squat properly without working through several progressions that help develop the specific mobility, strength and stability required to get through the exercise for repetitions.
Pistol Squat Progressions
There are two basic ways to progress to a full pistol squat. Either use a progressively lower bench or step, or use something to hold onto while doing a full pistol to help pull yourself up and progressively use it less and less until it is no longer required.
For the step progression, you can use actually stairs or use a chair to start.    Stand facing away from the chair or staircase and put all your weight on one leg keeping the other leg straight with the hip flexed slightly so the non-standing foot is held off the ground in front of you.     Flex the hips and reach back with your butt towards the staircase or chair and lower yourself down under control keep your arms straight and in front of you parallel to the floor to counterbalance your hips moving backwards.    Let the standing knee and ankle flex along with your hip as you reach your butt backwards and go down.    However, you MUST keep the heel of the standing leg down and this requires a lot of flexibility of the soleus tendon (soleus is the single joint calf muscle).    
Try to lightly touch your butt down to a stair or the chair then drive the standing foot down, squeeze the glute extending your hip, knee and ankle to the starting position.  Perform sets of 5 – 10 reps each leg.    Overtime find progressively lower steps, benches or individual stairs so that you are progressively squatting lower and lower until you can perform a full squat on one leg all the way down to the ground and back up again keeping your non-standing leg straight and parallel to the floor while the hip is flexed.
The second option to progress to full pistol squats is to hold onto something that you can pull on while doing a full pistol squat thereby assisting the stance leg.    You can hold onto a suspension trainer, a cable machine handle, door frame, chair or table, or resistance training band or rope anchored above you.    A great way to do this is to anchor a suspension trainer or resistance band above you to a secure point then grasp the two handles and pull on them as required to do a full pistol squat.    Over time progressively use less and less assistance from the upper body, switch to just one hand, then lessen grip and assistance until you can perform full pistol squats.

Videos:  https://youtu.be/It3yvU0fomI or https://www.youtube.com/watch?v=PPksQCbeVZw

Giveaway Winner!

I had so much fun seeing what everyone posted in the Teacher Toolbox Trio linky. Thanks to everyone who linked up.

I went to the Random Number Generator this morning, and drumroll…

I’m excited to announce that Stephanie Ann from Sparkling in Kindergarten was the winner of the $25 Teachers Pay Teachers gift certificate. Congratulations, Stephanie Ann!

And welcome to all of my new followers! I have lots that I look forward to sharing this summer.

Have a great weekend!

In One Sentence™ – Heroes Of The Storm – Hero Overviews [Very Short Reviews Of Each, Currently Text-Only]

[In light of the recent ‘Heroes Of The Storm 2.0’ release – even though this was a ‘work in progress’ since I started playing ‘Heroes’ again a bit ago and it is not fully compiled yet – I wanted to get this hopefully-slightly-helpful information up right away for everyone… So here it is – being added to as I complete it but without any Screenshots yet – I am collecting some together and plan to place them in-line within …Soon™]


Update: Last Added – Arthas on 2017.05.04



In One Sentence™


A Heroes Of The Storm

Hero Thingy Overview  


By: The Game Tips And More Blog


Presented in Alphabetical Order, in a Document-sorta-but-not-really format



[Initially, was invited to the Heroes Of The Storm Beta; but was not able to play much at the time and so I didn’t write about it much back then. I did work on a few articles, such as this one, adding to it the bit that I did play. Only recently (before I knew about “Heroes Of The Storm 2.0”) I got back into this fun game, tallying up my own opinions and favourites, of each and every hero in the game. Seeing “Version 2.0” come along, I felt that, even though I have not fully compiled every singly hero yet, I wanted to share what I did have done, so that everyone – and especially newcomers to the game – could get a quick idea of each Hero and how they played in the game, helping them make a choice as to which one to try. I will be returning to this post and adding more Heroes as I play them… I hope you enjoy these little snippets of info for each one – and See You In The Game!]




Rating Key (if applicable to Hero, when used):

* = Heroes I ‘Liked’ (fit my personal playstyle(s), or is unique in some way)

** = Heroes that are A Personal Favourite (I myself would play often or ‘mainly’ would use (may not match your individual preferences dear reader, this is just a Personal Rating of mine))






Auriel = Finding myself playing more offensively than defensively with this Hero, I enjoyed her AOE and healing capabilities.
Alarak = With skills focusing on mainly attacking Heroes, in the right hands this high-damage-potential Assassin could be quite deadly.

Artanis * = Another Hero with skills focused on killing other Heroes, Artanis comes with high damage output potential – and although I was left feeling oddly ‘limited’ playing him, Artanis was fun to play overall.

Arthas = A mobile tank – big, tough, but a little slow [in my opinion] – with some light healing (and the possibility to heal yourself) and some nice offensive moves as well, Arthas can become quite competent in The Nexus.

Azmodan ** = This large and lumbering behemoth is capable of dealing out huge damage as a “Ranged Specialist” – just be careful as you have fun creating your own armies on the way to dish it out on the enemies’ base, as you are also a ‘heavy target’, so to speak. A Personal Favourite.

Dehaka * = With deceptively simple gameplay [or is that ‘deceptively difficult’?], high damage output potential – and with the ability to ‘tunnel to any bushes on the map’ instead of a mount [with a cooldown], this Hero has some nice unique gameplay to fiddle around with in The Nexus.

Diablo = Huge and tough – as he should be – with some care taken and strategy used, this “Melee Warrior” will be a force to be reckoned with.

E.T.C. * = With strong yet simpler gameplay, ETC and his unique ‘rocker’ attitude is a fun handful of Tauren to Melee with.

Gazlowe ** = With the ability to plop down temporary turrets and shoot what eventually becomes HUGE DETH LAZORZ – not to mention being able to recover Scrap Parts for mana – Gazlowe The Goblin Engineer, though more complicated than many Heroes, was a joy to play and kill with. A Personal Favourite.

Jaina * = With straightforward damage and easy gameplay, Jaina The Mage is fun to use and fun to take out other Heroes with …if mages only had Unlimited Mana [in any game]…

Johanna = Johanna The Paladin is a little more difficult than most melee Heroes – she is far more offensive than defensive as I first thought she might be – with many life-saving capabilities, in the right hands she could be quite a formidable Hero to run with.

Leoric * = With the unique ability to ‘remain undead’ and re-spawn wherever you desire after a time, along with simple melee gameplay, this Hero was neat to play – in the right hands perhaps this one could do a lot of damage in The Nexus.

Lunara = With mainly indirect damage (DOT or Damage Over Time), this Hero was difficult to gauge; with the ability to always move faster than most Heroes (not needing a Mount) and her ranged attacks, perhaps in the right hands she could be quite effective.

Malfurion** = A multi-faceted Support Hero with both healing and offensive capabilities, if you like to play Support in other games (such as an Engineer, or Medic/Cleric), this ambidextrous Hero should be fun for you to play in The Nexus. A Personal Favourite.

Probius * = If I had to sum up Probius I would say words like ‘difficulter’ (because I say that’s a real word now) …and ‘cool’ …and ‘overpowered’ …and ‘work’ …and ‘cute’ …and ‘fun’ …and…other words like that with ellipsis between them.

Raynor = With simpler gameplay and the ability to buff any allies around you – along with the possibility of some light self-healing – Rayor the “Ranged Assassin” is a helpful addition to play in The Nexus.

Rexxar ** = If you’ve ever wanted to handle two Heroes at once, now you can with this ‘hunter-pet’ combination which promises good damage output and a lot of fun – if at a slight cost of easier gameplay. A Personal Favourite.

Samuro ** = If you like to be stealthy, confusing opponents and striking from the shadows, this is a fun Hero to do all that and more with. A Personal Favourite.

Sgt. Hammer ** = This spunky Ranged Hero in a Siege Tank has huge long-range capability – if she can be handled with caring hands. A Personal Favourite.

Sylvanas * = Capable of not only high damage but also ‘converting’ mercenary units to your side, this “Ranged Specialist” also has sleek gameplay and a powerful (translation: annoying to other people) Mind Control ability.

Thrall ** = Fast melee and a bit of spellcasting – along with being easier to play – makes this Hero a fun brute to run with. A Personal Favourite.

Tychus = With good offensive capability, this Hero is easy to learn and practice with.

Valla ** = With fast and smooth gameplay that is fun and easy to get used to – especially if you have played The Demon Hunter in Diablo III as many of the Demon Hunter ‘basic moves’ come into play in The Arena. A Personal Favourite.

Zul’jin ** = Focusing on Ranged damage and even doing more damage as his health lowers, this Assassin felt like it could take out both Heroes and swaths of mercenaries with ease, thanks to his light self-healing – just don’t get caught surrounded while trying to do the highest damage possible! A Personal Favourite.





Repeat  of top comment: [In light of the recent ‘Heroes Of The Storm 2.0’ release – even though this was a ‘work in progress’ since I started playing ‘Heroes’ again a bit ago and it is not fully compiled yet – I wanted to get this hopefully-slightly-helpful information up right away for everyone… So here it is – being added to as I complete it but without any Screenshots yet – I am collecting some together and plan to place them in-line within …Soon™]

Atlanta Blogger Meet Up

Yesterday, I had the privilege of meeting some fantastic teacher-bloggers as part of the Atlanta Blogger Meet-Up.

If you ever get a chance to meet up with other teacher-bloggers, I’d highly recommend doing it! It was wonderful to meet so many sweet and enthusiastic teachers who share similar interests, and now I can finally match names and faces with the blogs that I read all the time.

We met at the Swan Coach House in Atlanta for brunch, and it was wonderful. Amanda from Collaboration Cuties made us each a placemat with everyone’s name on it.

And Stacia (the other half of Collaboration Cuties) made us name tags.

Jivey from Ideas by Jivey made us a little goodie jar filled with treats of both the sugary and teachery kinds.
And Elizabeth (Fun in Room 4B) and Brandee (Creating Lifelong Learners) made us this adorable to do list that is dry erase. 
There were 9 of us in all, and I’m so glad that I went. I’m typically a really shy person, but it felt like I was getting together with old friends! I’m so grateful to be a part of the teacher blogger community, and I love learning from other teachers. This group in particular has so much to offer, and if you don’t already follow each of these bloggers, you’re definitely missing out.
From left to right:
Amanda – Teacher at the Wheel
Jivey – Ideas by Jivey
Brandee – Creating Lifelong Learners
Denay – The Gemini Teacher
Liz – Polka Dot Firsties
Stacia & Amanda – Collaboration Cuties
Me!
Elizabeth – Fun in Room 4B
If you missed out on the meet up, no worries — I have confidence that this will become an annual tradition. And for those of you who are interested in classroom technology, the International Society for Technology in Education (ISTE) is holding its annual conference in Atlanta next summer on June 28 – July 1. Wouldn’t it be great to have a teacher blogger meet up around that? 
After lunch, most of us ventured to Ikea where I once again spent too much money on my classroom despite not needing anything in particular. I’d show you all of my finds, but I’m going to wait until my complete classroom reveal. Given that I start preplanning THIS THURSDAY and have students on August 1, that really won’t be too long to wait!

Have a great week!

WORKOUT ANYTIME on Entrepreneur

WORKOUT ANYTIME on Entrepreneur

WORKOUT ANYTIME Franchisee Chris Gately was recently featured in an article on Entrepreneur. The article titled, “Franchise Players: This Man Signed His Franchise Agreement While Serving in Baghdad” was in celebration of Memorial Day, Entrepreneur was profiling Veterans in Franchising. In this Q&A, Chris gives his insight to running a WORKOUT ANYTIME franchise.

You can view the full article here. 

Paperless Mission #6: Setting Up GoodReader (iPad)

This is the sixth post in my Go Paperless! Challenge Series. If you haven’t completed the previous missions, be sure to complete those first.

  • Mission #1: Gather Your Tools
  • Mission #2: Build Evernote Notebooks
  • Mission #3: Email Notes to Notebooks
  • Mission #4: Create Checklists in Evernote
  • Mission #5: Organize Your Files in DropBox

Also be sure to link up at the Go Paperless! Linky. 

Mission #6: Setting Up GoodReader (iPad)

As I’ve mentioned before, I work off a lot of devices. I’m in a 1:1 iPad classroom, but even before my students had access, I had an iPad of my own that I used constantly. I liked having it handy for anything that I was working on, and once I learned about GoodReader, my love for the iPad grew tremendously. I’ve shared some love for GoodReader before, but GoodReader is the ultimate document reader for the iPad. It allows you to read any type of document and annotate over .pdf files. It also syncs with a variety of other apps, allowing you to pull and read all of your important documents into one place.

Once you have your important documents organized on Dropbox, open up the GoodReader app on your iPad. Here, you’ll be able to connect GoodReader to your Dropbox account. To do this,

My documents list already has some items and folders listed, but yours will likely be empty. The left column shows all of the folders and documents you have saved in GoodReader (and could therefore access without an internet connection). The right column has all of the utilities for GoodReader. Today, we’re going to focus on the one towards the bottom — “Connect to Servers.” 
When you click on the “Add” button, you’ll be able to see the many, many connections GoodReader can make. Here are a few highlights:
  • Popular Mail Servers (GMail, Hotmail, etc.) – this connection doesn’t grab all of your emails, but it will allow you to see any messages that have an attachment. This is great for when you’re at a meeting and somebody sends out some documents you need.
  • Dropbox – you can read all of the files that you’ve saved there.
  • Google Drive – view any type of Google Drive file that you have — from spreadsheets to presentations to documents.
The connection set-ups are fairly intuitive. You will need to name each set up (On some screens that shows up as “Readable Title;” I named mine based on what I was connecting to), but then you simply enter your username. You can also enter your password, in which case it will be saved to the device and you won’t have to enter it again, or you can log-in each time you want to access a document.
As you can see from my left column, there are a few folders that I’ve downloaded straight to GoodReader so they’ll always be available to me. These are folders that I’m constantly using and want easy access to. I also have it set up so that they’ll automatically download updates to those folders whenever I add more documents to my Dropbox account. 
Once the folders are set up in GoodReader, you can read the documents, but you can also annotate over .pdf files. I use that feature a lot on my curriculum documents, and I’ve also started doing all of my running records and reading assessments on my iPad. Here’s an example that shows you the annotation tools in the document viewing pane:
I keep my annotating toolbar pinned on the right side, and there you can see a variety of annotation options that are available — typewriting text, creating “sticky notes,” highlighting, underlining, drawing boxes, arrows, etc., and the last option is the freehand tool. I use this for running records with a stylus.
One of the best things about GoodReader is that it works well with other apps. Once I finish annotating a document, I can send it to other apps such as Evernote or Dropbox  from the original “My Documents” screen.

How I Use It

This is one of my must-have apps because of the broad range of ways it can be used:

  • Turn your iPad into a second computer monitor — When I’m using lots of curriculum documents to write unit plans, I can leave it open in GoodReader with all of my notes and highlights while I work on my laptop or computer. No more switching between screens on my computer. (Am I the only one who finds that annoying sometimes???)
  • Highlight standards that you’re focusing on each term without having to print out (or lose) new documents all the time.
  • Annotate rubrics, running records, and other types of student work
  • Use with students to create paperless assignments

I’ll be posting more in-depth tutorials about how to do all of these in future installations of this series, but for now, your challenge is to begin exploring GoodReader. Then, in the comment section, share a bit about how you think this app could be useful.

Spring break starts next week for me, and I can’t wait! I will try to get another installment posted this week, but I make no promises. It’s the end of the term, and that’s always a super-busy time with report cards and grading. I must say, however, that I’m more organized than ever going into this given how much less paper I’m using!

Have a great week!

ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE

After a look at the pictures in this charming crib Scandinavia, we can only guess at the last, this apartment has no space. You’ll probably be surprised to know that in reality, the total area of ​​the house has a room of 44 square meters. Located Vasastan, Stockholm, this bright and comfortable studio seems to have everything: a beautiful modern design, function and a general atmosphere of welcome.

ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE

ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE

According Alvhem Makleri & Interior, it is an opportunity that exudes peace and tranquility. The living room is a bright and social, with the opening of both kitchen and bedroom. Windows dissolves the border between the inside and provides natural light to govern. We are sure that you have already noticed alcove large enough for a king-size bed. This can be a bit flat, but the design approach used to improve inspires only the “oversized” ideas.

ALL-IN-ONE-ROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT DESIGN CONCEPT

ALL-IN-ONE-ROOM APARTMENT DESIGN CONCEPT

ALL-IN-ONE-BATHROOM APARTMENT DESIGN

ALL-IN-ONE-BATHROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT SCHEME

Tune Into Technology Linky: Integrating Technology into Reading

I’m excited to be linking up with iTeach 1:1 and Learning to the Core for their new series Tune into Technology. This week’s topic is Integrating Technology into Reading, so I wanted to share 5 strategies I use to do this.

1. Let kids annotate their reading with GoodReader.



I’ve talked about this app before, but it’s one of my favorites. GoodReader allows you to annotate pdf documents. I use it for almost all of my professional reading, and I’ve converted several documents into pdfs for my students as well. It’s a fantastic tool because my students are able to leave “think marks” all over their reading, and I don’t have to worry about them writing in a book or leaving sticky notes everywhere. We’ve even developed our own codes for how to use the annotation tools.

2. Share favorite books on KidBlog.

My students LOVE sharing the books they’re reading on KidBlog, and they especially love reading and commenting on each other’s blogs. I’ve talked more about how we do this in a previous post.

3. Create Book Trailers in iMovie.

Some of my students began doing this for fun at the end of the school year when we became a 1:1 iPad classroom, and I will definitely be doing this more next year. iMovie has some great templates built-in for this, and my students loved being able to share their favorite books through this medium.

4. Create book clubs and discussion groups on Edmodo.

We started using Edmodo at the end of the school year, and it was a great way to get conversations started or keep them going about the books we were reading in class. You can read more about getting started with Edmodo in my paperless series here.

5. Use Evernote and GoodReader to assess reading.



I use the running record templates from the Reading & Writing Project at Teacher’s College. Because they’re pdf files, I can annotate them in GoodReader, and I can record students while they’re reading in Evernote. I’ve written a complete tutorial on how to do this here.

How do you integrate technology into reading instruction in your classroom? I’d love to hear your ideas. And be sure to link up with the Tune into Technology linky!

And don’t forget to join us for the Southeastern Blogger Meet Up. Click the button below to get the details and RSVP!

What Kind of Protein is Best?

There is a lot of confusion about “superior” and “inferior” proteins—so called “complete” and “incomplete” foods. At the beginning of the century, researchers doing animal experiments discovered that rats could live and grow on a single food such as eggs. Eggs, like meat, fish, and cheese, were therefore dubbed “complete” proteins. Vegetable foods such as rice, legumes, seeds, nuts, corn, and wheat were called “incomplete” since on their own they were unable to maintain life and growth. What all this meant is that the so-called “complete” proteins contain all the eight acids which humans cannot make for themselves in adequate amounts. But what they didn’t take into account is that vegetable food—say, corn— together with another—say, red beans—also contains the eight essential amino acids and, provided you eat one vegetable together with another, you are getting the full complement of the eight essential amino acids in good balance. Better still, you are getting them without the fat that accompanies protein from animal foods. The idea that we need animal foods in order to be healthy is simply untrue. Populations numbering in the millions in different parts of the world have lived and developed enviable health and strength for thousands of years on a purely vegetable diet.

Diet Start

The best—and often the cheapest—sources of protein are the unrefined, unprocessed vegetable foods—complex carbohydrates complete with their natural fiber content, vitamins, and minerals—whole grains such as rice, wheat, oats, barley, legumes including lentils and beans; mixed seeds or mixed nuts; fruits, and vegetables from salad greens to carrots and potatoes. Eaten together in salads and casseroles, bread and soups, they provide low calorie menus without the danger of high fat from the intake of animal foods. The Lifestyle Diet provides 15 percent of your daily calories in the form of protein. It allows you to eat four ounces of meat, fish, or poultry (preferably fish) three times a week. On the days when you choose not to eat these foods you can have instead four ounces of mixed nuts or two eggs. It completely eliminates all cheese except those such as cottage cheese and curd cheeses made from low-fat milk.

If you prefer, you can take all your protein from vegetarian foods. The question of a vitamin B12 deficiency on a vegetarian diet is always brought up as evidence of the need to eat meat, although long ago biochemist Schweigert of the American Meat Institute researched the question and discovered that the need for B12 rises and falls with the amount of protein eaten. B12 is available in dairy products and eggs included in the Lifestyle Diet. In this kind of protein-economical diet it is correspondingly low. Schweigert also discovered that the whole wheat grain is a usable source of B12 provided it is not processed into white flour. If it had not been, then the millions of people in different countries who have lived almost exclusively on a vegan diet (vegetarian with no milk, dairy products, or eggs) would have suffered B12 deficiencies.

Long Bean Benefits For Health

LONG BEANS BENEFITS FOR HEALTH

Long Beans Benefits For Health Long Beans are vegetables that very often we encounter in everyday dishes. Whether it’s for home cooking and restaurant cooking. There are also cook it in a way sauteed, but some are making to raw vegetables.
But despite the long beans so popular for the food, I’m sure not everyone knows about the nutritional value as well as the nutrients found in these vegetables. In fact, long beans have vitamins and minerals also are quite high which is also beneficial to health.
Long Bean Benefits For Health
So, to increase your knowledge about health, here we present an overview of the nutritional content of beans as well as health benefits.
Nutrient Long Bean
Long beans contain a variety of essential nutrients for your body, including:
As a Source of Protein
With a protein content that is at least 8.3 grams per 100 grams chickpea stew, the bean vegetable vegetables long become a source of vegetable protein in our body needs protein for every day.
Vitamin B Complex
In every 100 grams of beans boiled which contains 146 mcg of folate (37% requirement), 0.2 mg of thiamin (14% requirement); 0.1 mg vitamin B6 (5% requirement); and 0.1 mg of riboflavin (4% needs); 0.4 mg of pantothenic acid (4% requirement); serta0,6 mg niacin (3% requirement). Various vitamin B complex contained in the long bean is an essential nutrient for our bodies.
In general, vitamin B complex plays an important role in energy production and nerve function in our body, so vitamin B deficiency is usually characterized by fatigue and lack of energy.
Contain High Fiber
Long beans are vegetables that are rich in fiber. In every 100 grams of beans boiled, no fiber content up to 4 grams and meet 15% of our daily fiber needs. Fibers on long beans are available in the form of pectin, which is a soluble fiber, to very good in helping keep blood sugar at normal levels, as well as for normal fat metabolism.
Mineral content of Long Bean
Long Beans are also rich in various minerals, among others :
Containing Calcium
In Every 100 grams of beans boiled which contains 42 mg of calcium (4% requirement). Calcium is an essential mineral for the formation of bones and teeth healthy and strong as well, also for nerve and muscle function optimally.
Containing Iron
In Every 100 grams of beans boiled which contains 2.6 mg of iron (15% requirement). Iron is an essential component for the formation of enzymes for a variety of chemical reactions in the body, and forming the main component of red blood cells and cells
muscle.
Contains Magnesium
In Every 100 grams of beans boiled which contains 98 mg of magnesium (25% requirement), where the mineral content is very important for healthy bones and teeth, muscle and nerve function, as well as the activity of enzymes in the body.
Long Bean Benefits For Health
Containing Manganese
In Every 100 grams of boiled string beans also contain 0.5 mg of manganese (24% requirement). Manganese is essential for enzyme activity, and also for the metabolism of carbohydrates and joint health.
Containing Phosphorus
In Every 100 grams of beans boiled which contains 181 mg of phosphorus (18% requirement), which is also important in energy production and the formation of bones and teeth.
Containing Copper
In Every 100 grams of beans boiled which contains 0.2 mg of copper (11%). Copper is important for skin health, it also increases the body’s resistance to stress and disease.
Containing Potassium
In Every 100 grams of beans boiled which contains 315 mg of potassium (9% requirement), which is important for nerve function and also our muscles.
Containing Zinc
In Every 100 grams of boiled string beans also contain 1.1 mg of zinc and zinc (7% requirement). Zinc is a component of enzymes involved in the formation of red blood cells and bone.
Containing Selenium
In Every 100 grams of boiled string beans also contain 2.8 mcg selenium (4% requirement), where selenium is an essential mineral in the synthesis of the enzyme, which also acts as an antioxidant against free radicals in our bodies.

Well, that’s what some of the vitamins and minerals contained in the beans. For you who like to consume either in the form of beans and vegetables stir fry, continue the positive trend.

SMALL ROOM DESIGN IDEAS FOR TEENS

SMALL ROOM DESIGN FOR TEENS

SMALL ROOM DESIGN FOR TEENS

There were many children inside, but somehow neglected to share ideas on the bed and adolescents. We will try to catch it from that position, where we’ll show you 10 ways to decorate the room of a teenager. Of course, these designs are aimed at age group 9-14 years and do not include all decorations eccentric but warm and relaxing colors. There are plenty of shelves for CDs, books and magazines, then we are also dealing with students of consciousness. I especially like the pictures on the wall of cartoons in black and white as they seem to bring personality into the room.

SMALL ROOM DESIGN IDEAS FOR TEENS

SMALL ROOM DESIGN IDEAS FOR TEENS

SMALL ROOM DESIGN FOR KIDS

SMALL ROOM DESIGN FOR KIDS

SMALL ROOM DESIGN INSPIRATION FOR TEENS

SMALL ROOM DESIGN INSPIRATION FOR TEENS

SMALL ROOM INSPIRATION DESIGN FOR TEENS

SMALL ROOM INSPIRATION DESIGN FOR TEENS

a friendly stopped by to say hello, at 5000 feet

The video shows a man flying calmly, when suddenly a military fighter appears out of nowhere. After quickly moving the wings up and down in greeting, the plane disappears from the sky at a speed worthy of a video game or a movie

10 TIPS TO DECORATE KIDS BATHROOMS

Teach young children the fundamentals of responsibility bathroom can be a challenge. From potty training to control the way you brush your teeth, bathroom children should be a place of inspiration and pleasure for them to learn and grow. Child bathroom decoration can borrow design elements of your room. With color, the creative organization, and areas designed exclusively for little hands and creative minds, here are 10 tips to decorate their bathrooms. Depending on the age of your children, follow these tips to design your age in mind. For young children, bright primary colors are inspiring, and for older children feel more mature palette of neutrals and pastels.

KID’S BATHROOM DESIGN

KID’S BATHROOM DESIGN

1) Create a colorful background: Although most of the plumbing fixtures remain in neutral shades of white, bone or brown, it is essential to their subject is colorful and fun. Consider painting the vanity, wall, wallpaper, stenciling and playful lyrics on the walls. Be careful when you use the stickers that moisture in the bathroom can lead them to ignore good.

2) Keep the walls with clean surfaces sustainable: When decorating a child’s bathroom, especially around wet areas such as toilets, sink and bathtub, make sure the surfaces are easy to clean and durable. ceramic wall tile, wall painting wainscoting panels are washable and ideal.

3) Provide adequate lighting. This advice applies to any bathroom! You do not have dark areas in the bathroom. In terms of cleaning and a bit to see what they do. Bathrooms for children are a priority area of ​​injury, as wall lighting, overhead ambient lighting, ceiling lights and even in the vanity are clear and are not shadows.

4) the organization is the key to learning, children’s room when decorating a child to remember to put the bathroom easy to find areas of the organization, and easy to reach new heights. Vanity sank in open shelves under the bath toy suction cup holders and bins hygiene products to help children to keep the bathroom clean and tidy.

5) Small furniture a little ‘small: Believe it or not is a fitting suitable for babies and small children. There are different estimates for lower mobile is a good lesson for children how to use the toilet. Regardless of the customer, when planning your baby’s bath, to know the options are there for the growing child.

6) to accessorize on a budget: You can spend a fortune to decorate the bathroom of your children also understand that a simple color palette of coordinated accessories that are affordable, can give an overly great! From color-coordinated towels, rugs, shower curtains and hygiene products, operators can combine colors and patterns and decorations.

DECORATING KID’S BATHROOM

DECORATING KID’S BATHROOM

7) The theme of the election: if you are at a loss how to decorate your bathroom kids, consider to choose a theme they have. Derived from animals, sports and entertainment activities to spend time with their favorite cartoon characters and favorite color, the options are endless. If a child is old enough to ask them their opinion on how they would like to decorate your bathroom.

8) Bathroom safety: Make sure the bathrooms have the proper procedures instilled in interior design. Even though a beautiful crystal vanity knobs cabinetry might be nice to see, if not secured properly can be dangerous for children. Make sure all the furniture, harmful chemicals, and decorative elements are not easy for children.

9) Update bathrooms of a teenager: For older children and adolescents want to want to accessorize and color coordinated decor may not be as strong. Instead, opt for temporary accessory that can change depending on your mood teenager! colored towels, rugs can coordinate a work of art hanging on the wall all have their own bathroom needs to make your teen feel comfortable in their space.

10) Keep it simple: It ‘s easy to wrap decorate any room in your home. Remember to have fun when decorating your bathroom children, and to seek inspiration from blogs, interior design magazines and shops to visit in local dishes. Many stores offer “instant bathroom furniture for you. combinations of color coordinated accessories, you can mix and match. No thought required!

Bring together elements to your bathroom decor kids can be fun and easy to use these 10 tips. Consider your child’s age when decorating, as well as a way of life. If you are a busy parent who does not have time to clean the bathroom with lots of toys to keep open the basket and quick cleaning areas. Remember that you are teaching and inspiring children to enjoy swimming and creative learning.

LUXURY DECORATING KID’S BATHROOM

LUXURY DECORATING KID’S BATHROOM

1960 Lincoln Continental mk 5 Formal Limousine

in the above photo, lower left side, you can see the air conditioning vent under the grab bar

and this cool control panel / radio for the passengers in the back seat to control the partition, radio, and air conditioning level

and the AC takes up about a 1/3rd of the trunk space

Rörstrandsgatan Popular Extraordinary Penthouse

Extraordinary penthouse in the popular Rörstrandsgatan.

Extraordinary penthouse
Extraordinary Penthouse
This confidential loft with windows on all sides there is an optimal location in the circumcircle Birkastan. A rarity in the design and location where the architect has planned floor in every detail to create an open atmosphere where the different rooms in a natural way integrated with each other. This floor will host a social get-together in a bright environment with plenty of space by nearly 5-foot ceilings in the ridge and a large sunny terrace right next to the kitchen. Beams are tastefully built and floor is one of few lofts that are not constrained by snetak. 
Well-chosen and thoughtful details include floor heating under beautiful oiled oak parquet flooring and dimmable spotlights throughout the whole apartment. In the living room we find a plastered fireplace with adjustable chimney sat on the black painted fire brick. Modern sound systems are drawn into the walls. Windows are fitted with double glazing which means, in principle, completely eliminated the sound inlet and heat protection glass to keep the floor cool in the summer time. The kitchen is very lavish and signed exclusive German manufacturer Bulthaup. The kitchen is consistently white countertops in the unique composite material is white Corian. The machinery in Alufinish come from reputable Gaggenau. The two bedrooms are furnished with site-built wardrobes and the slightly larger bedroom has both big walk-in closet and bathroom adjacent. Both bathrooms enjoy exclusive furnishings and are equipped with underfloor heating. One of the bathrooms have both shower and bath and the other only shower. Modern washing machines and tumble dryers from Miele. 
Rörstrandsgatan is one of Stockholm’s main restaurant streets with wide range of pubs, cafes and bars. Nearby is also an opportunity to cozy walking and jogging along the Karlberg Canal. Or how about a picnic or playing tennis in Karlberg Palace Park, only a few hundred meters away. Good communications in the form of Karlberg station with both commuter rail and bus service as well as St. Eriksplan underground station.
LivingsRoom
LivingsRoom

BeDroom Design
BeDroom Design

Bathroom Desing
Bathroom Desing

Design Schema
Design Schema

INSPIRING DESIGN DETAILS LOOKOUT HOUSE

Inspiring Design Details

Inspiring Design Details

The project is located atop a hill in Fairfield County, Connecticut, and has stunning views of distant Long Island. Depending on the shape of the original designers of the pyramid house, centered on the height of an open plan double lounge around an indoor pool, has been simplified and facilitated through a range of modern materials (including bamboo, stone blue tiles and glass) and a new lighting program. A glass bridge “architecture synapse“, which clearly distinguishes old from new connects the main house for the master suite.

As the original structure, the new suite contains a large volume a little, in this case, a cube on foot, finished Claro walnut that divides the rest areas and bathrooms. billiard room “in the first photo is the most spectacular part of the house, offering an ideal place for socializing and relaxation. And as you can below, a resident has another pot, this time integrated nature

Inspiring Design Details Rest Room

Inspiring Design Details Rest Room

Inspiring Design Details Dining Room

Inspiring Design Details Dining Room

Inspiring Design Details Kitchen

Inspiring Design Details Kitchen

Inspiring Design Details Bedroom

Inspiring Design Details Bedroom

The link between carbohydrates and insulin resistance

The hormone insulin plays a major role in the metabolism of carbohydratesand their conversion to energy in the body. When you eat carbohydrates, they are converted into glucose in the bloodstream, which triggers the release of insulin. This virtually escorts the glucose to the body’s cells, where it can be used as energy. If there is too much glucose, the insulin turns it into glycogen, which is stored in your muscles and liver ready to be converted back toglucose when it is needed.

However, in the high-refined ‘carob’ world in which we live, we often have too much glucose floating around in the bloodstream, and then insulin converts it to fat. And our body cells may become so flooded with insulin that they cease to be responsive to it, so the pancreas keeps producing more and more insulin in an attempt to get energy to your cells. This is known as ‘insulin resistance‘.

Diet Start

Over a period of time, less and less glucose gets used as energy, and more and more gets laid down as fat. Since insulin also sends messages to the brain to tell you that you are hungry, more and more insulin means increasing cravings for carb-laden food.

The only people who are benefiting from refined foods are:

  • The dentists who have to patch up your decaying teeth
  • The pharmaceutical companies who have to sell you drugs to sort out the symptoms of your ailing immune system and your susceptibility to chronic and degenerative disease
  • The food manufacturers, who are only really interested in profit. If you add to this a high intake of caffeine, alcohol, smoking and a lack of exercise, then you will almost certainly be taking a wobbly walk down the road to ill health.

Is it enough just to cut out refined carbohydrates?

Totally banishing all things processed and adopting a healthier diet based on fresh produce is a definite start, but if you have a weight problem linked to insulin resistance, it may not be enough, because if you are still eating a diet that is too high in the wrong sort of carbohydrates — coupled with not eating enough protein or fat to slow down the rate at which these excessive carbs are hitting your blood-sugar levels — you will still have problems. A low-fat/high-carb diet can give you a nasty shock every time you jump on the scales.

The thing to remember is that all carbohydrates have an effect on your blood sugar, and every gram of carbohydrate consumed is equal to one gram of glucose in your bloodstream. So if you are eating more than your body can burn for energy, or can safely store as glycogen in the liver, the rest will be turned to fat.

The key factor in balancing blood-sugar levels and banishing thesymptoms of insulin resistance is controlling your intake of carbohydrates. In order to do this effectively you need to know which ones have the greatest impact on your blood sugar and which do not.

Initially, this will need a little time and effort on your part as you learn about the different sorts of carbohydrates. You may find that the changes you have to make to your diet are quite drastic, but before long — as you start to feel and look better — you will be amazed at how little you miss the wrong kinds of carbohydrates such as processed and sugary foods. Youwon’t feel the need to pile your plate high with potatoes and pasta, because your newly balanced blood sugar levels won’t be crying out for acarbohydrate fix.

Men’s Body Click Diet part 1

In the summer the men had to cope with constant daylight, so they were missing the normal cues to go to bed. ‘When it’s daylight, even though it’s midnight or one o’clock in the morning, you don’t think of it as being the time to go to sleep,’ says Dave. ‘Your mind just says, hey, there’s work to be done. I may be tired but I’m not recognizing the need for sleep because it’s daylight.’

Already lacking the strong time-giving effects of light, the men could not set their body clocks by what they were eating, either. ‘We had four meals a day. Two of them occurred at noon and midnight, the other two at six in the morning and six in the evening,’ continues Dave. ‘One of the difficulties in telling what time it was, was that the 6:00 a.m. and 6:00 p.m. meals were powdered scrambled eggs and the other two meals were stew. So if you woke up at six o’clock and went into the galley for a meal and you had powdered scrambled eggs, you didn’t know whether you were having breakfast or dinner.’

Despite losing the signals that are normally provided by the cycle of light and dark, the timing of activity, intake of food, reasonable work shifts or even simple obedience to the clock, most of the men managed toget through without becoming acutely sick or injured. But some of them developed a condition they called Big Eye, in which they became stuck in a sleepless state. Almost everyone had duties that required exhausting physical labor, but even so, the men with Big Eye failed to sleep for days.

Diet Start

The men with Big Eye demonstrated that the body’s flexibility is a double-edged sword. The loss of essential time givers easily disrupted their circadian rhythms, probably setting them up for health problems if they continued down that path. On the other hand, proper application of some fairly simple rules for circadian health could have rescued them. And the same rules can rescue you from a potentially perilous state of disorganization.

The Body Clock Prescription reinforces strong circadian rhythms; produces better sleep, enhanced moods, alertness and energy; and reduces the risk for reproductive cancers for everyone. In addition to these overall improvements in health and well-being, there are specific aspects of the diet that have a favorable impact on prostate health, a subject that provokes anxiety for many men.

Prostate Ailments: The ‘Male Problem

There is certainly cause for concern. Prostate ailments are an almost universal threat to men in Europe and North America. Among men in the United States, prostate cancer is the most common cancer; it is also the second leading cause of cancer death.’ In addition, countless men suffer from other prostate problems. This phenomenon represents a kind of `male problem‘ corresponding roughly to what used to be called ‘female problems’, a much less specific collection of gynecological woes that were lumped under this heading in the mid-1900s. The notion of female problems embraced excessive menstruation, infertility, irregular periods,cramps, vaginal discharge and other kinds of medical mischief that women endure.

The male problem is more localized in the prostate gland, the part of the male reproductive system that secretes fluids that help transport sperm. Nevertheless, it is a fairly complicated picture, which includes inflammations of the prostate, a common condition known as benign prostatic hypertrophy (BPH) and prostate cancer.

What’s more, prostate problems may lead you to needing a cystoscopy, where a narrow flashlight is inserted into the hole from which you pee until it arrives in your bladder. On the way, it passes through your prostate gland. Cystoscopy is a procedure that causes ‘big eyes’ in the bravest of men.

Besides cystoscopy, the other method often used to examine men with prostate complaints is digital rectal examination, in which the examiner can feel the profile of your prostate gland. (Digital refers to the doctor’s finger, not his computer.) Both give much less information than you would expect to get from such relatively invasive procedures. Opening your mouth and saying Ah’ discloses much more about your teeth, gums, tongue and throat than any rectal exam reveals about your prostate, unless you have a huge lump. Ultrasound, magnetic resonance imaging (MRIs) and computerized axial tomography (CAT) scans are necessary to get a good picture of what’s happening to this gland, whose actual location on the floor of your pelvis seems mysterious to anyone who has not studied anatomy.

Diet and Prostate Health

If you look around you, especially as you get older and start hearing stories from men who have prostate trouble, you may wonder if there’s something simple you can do to avoid it. I’m not talking about early detection, which is mentioned frequently these days. (Of course, most men’s idea of early detection is that early next year or the year after would be just fine.) Nor am I saying that a good history, physical exam, measurements of prostate-specific antigen (PSA), a common blood test used to screen for prostate cancer and other indicators of your underlying health, prostate or otherwise, are not a good idea.

But you’re misplacing your priorities if you go through those procedures without making some modest changes in your diet now to prevent troubles in the future. Most men who have a reasonably healthy personal and family medical history and who don’t abuse themselves with excesses of drugs, tobacco and alcohol, other risky activities or excessive inactivity can probably remain free of obvious symptoms even if they don’t implement all the points of the Body Clock Prescription. Some of these pointsare aimed at people who are trying to get out of serious medical trouble or who have risk factors that call on them to follow the diet very strictly.

Naturally, the more closely you follow the Body Clock Prescriptionthe better, but if you do nothing else, I urge you to consume soy protein and flaxseed powder daily to prevent prostate problems. By making these simple dietary changes and keeping your mind open to the possibility that fungal infection, intestinal overgrowth or allergy might have a hand in any prostate inflammation that is not otherwise easily diagnosed by a physician, you can go a long way toward avoiding the possibility of getting prostate cancer, as well as the other problems that frequently lead men to undergo cystoscopy.

Why you will lose false fat

Donna didn’t look fat, at least not in the leggings and long sweater she was wearing as she entered my office. Her legs looked slender and fit, and her sweater hid the rest. But she felt fat.

`I’ve got a guy’s type of weight problem,’ she said as she sat down. She was animated and energetic, but obviously frustrated. ‘Women are supposed to collect fat in their hips and thighs — aren’t they? — but mine sticks right here.’ She patted her stomach. When she was sitting, I could see that it bulged, even under the thick sweater. ‘I hardly ever overeat,’ she said, `but since I’ve hit 40, I get no forgiveness from my body. It’s like my metabolism took early retirement. I take two bites and I can feel the fat cells around my waist start to expand. Literally. I pinch my love handles, and they’re thicker before I even get up from the table.’ She looked at me expectantly, as if I might not believe her. ‘My last doctor,’ she said with a sour look, ‘told me there’s no way that food could make me fat that fast. But I can feel it happening.’ Again, she searched my face for reassurance. She had an upbeat personality, but she was almost ready to give up. She ate carefully, exercised hard, and still carried 20 extra pounds.

Diet Start

`It’s not your imagination,’ I said. ‘That feeling of instant weight gain happens to a lot of people. But it’s not fat you’re gaining. It’s fluid retention and bloating, and you’re probably getting it from food reactions. A lot of the swelling and bloating from food reactions occurs directly in and around the gut.

That’s why you feel it in your midsection right away.’

`If it’s not fat,’ she said, ‘why doesn’t it leave as fast as it comes? I look like this almost all the time.’

`Your biochemistry won’t allow it to go away, because your body is trying to protect you. When you eat reactive foods, your body sees them as foreign substances, almost as poisons, and it goes all out to protect you. It can take two to three days to stop reacting to some foods.’

Tut it’s not like I eat junk. I’m an old-time you-are-what you-eat type. I was eating granola before they even had a name for it.’ She smiled, but I could see she felt cheated. For many years, she’d followed all the rules — but the rules had been wrong.

`People can become reactive to healthy foods,’ I said, ‘even granola, if you eat it all the time. Do you eat a lot of non-fat and artificially sweetened foods?’

`Now that my metabolism has slowed down, I’ve got to.’

`I hate to say it, but some of those “lite” foods may be doing you more harm than good. If you’re reactive to a food, it can be virtually calorie-free and still make you gain weight. Even diet soda can cause bloating and swelling.’ She looked surprised. Most people these days are so accustomed to counting calories and fat grams — the quantity of their food — that they forget about the importance of quality.

`I don’t think you’re eating too many calories,’ I said. ‘And I don’t think your age is the real problem. Your metabolism is slowing down just 5 per cent every decade, and that’s not enough to cause what you’re experiencing. I think you’ve just developed some food reactions over a long period of time. When you resolve them, you’ll lost your weight.’

Tut I was tested for allergies and they didn’t find any.’ `Did they explain that not all food reactions are allergies?’ I asked.

`No.’

I wasn’t surprised. Most doctors don’t really understand food reactions. They usually have an all-or-nothing attitude; they think that you either have a classic food allergy, with hives and wheezing, or you have nothing at all.

I gave Donna a brief rundown on how food reactions work and how they cause bloating and swelling. I explained it out of respect for her. Some doctors think it’s acceptable to tell patients what to do, without telling them why, but I object to that approach. If patients are willing to change their lives by taking my advice, they deserve to know exactly why these changes will help.

As I gave all the details to Donna, she listened attentively and took notes. Over the next few weeks, she eliminated her false fat foods — one of which was oats, a primary ingredient in most granola — and dropped about 15 pounds.

Now I’ll give you the details on how food reactions get started. Then we’ll look at how they cause bloating and swelling.

If you’re going to make changes in your life, you deserve to know exactly what’s going on.

I’m sure some of this information will hit home. Often, when I tell patients about food reactions, they say, ‘That’s me you’re describing.’

Training Biceps and Triceps with Fat Circular Bands

If you want to take your guns to the next level consider adding in band training.    Those flat circular bands you see in the MX4 Area of the club are serious training tools!    These bands provide the advantage of increasing resistance throughout the range of motion to challenge your muscles in a different, yet complimentary way to free weights or machines.

There are a number of ways to trains biceps with bands from the most simple which is just standing on the band with feet spread and holding the upper loop of the band on both or one and handing and curling up and down.      You can also stand  with one or two feet in the center of a band and grap the two looped ends and curl the end/ends up to pump up those biceps.       Another option is to attach band handles to the band to allow you to use even more resistance.     Standing on one foot in the enter of the band will give less resistance than standing with two feet spread apart.

You can also attach a band to an immovable object like a post or even a door using a door holder (see www.resistancebandtraining.com to purchase one of these.  Another option to create more length is to attach a band low and behind you and then loop another band through this band and attach handles to the band on both ends.      With your back to the anchor grasp the handles and step forward to create some level of tension in the band keep your fee in a split stance and head-up.   Do a bicep curl  with the handles and as you fatigue take small steps back to do drop sets.   This exercise emphasizes the stretched position of the bicep comapred with the single band bicep curl described above.

You can also get an incredible tricep workout using bands using the set-up described above with handles attached to the bands.    In this case turn your back to the anchor grasping the handles with elbows held high by the sides of your heads.   Brace the core while in a split stance and keep the elbows high and motionless then extend your elbows – wow does that create a pump and burn!

To see exactly how to set-up and perform these incredible bicep and tricep exercises using flat circular bands and handles check out this video from resistancebandtraining.com:  https://youtu.be/mF-FbNSPF2Q

Guild Wars 2: How To Ride “The Train” of Queensdale (Champion ‘Farming’ Runs As A Group) Tutorial with Map

[NOTE*** As of April 15th, 2014 the changes to the game with the April 2014 Feature Pack update have altered The Train route somewhat – these changes will be updated in this map and article as they solidify into a commonly-agreed Route…
FURTHER UPDATES AT THE BOTTOM OF THIS ARICLE]

Ah, Guild Wars 2… I’m having so much fun with you, I can barely stop to start typing helpful Tips for others to read! Why are you so awesome? Oh, that’s right, your creators and other ArenaNet buddies heard the nighttime wails of MMORPG players from other games around the globe and listened intently to our cries, wanting to soothe us softly by satisfying requests we players have made of all of those other games, didn’t you? Oh, yes you did.  The result: a game I wish I had gotten into a lot sooner… Thank you, ArenaNet.


For those new to the game (or those who haven’t done this before), in the beginning area of the Human lands of Kryta, there is a phenomenon called “The Train”. After asking a few questions in-game and watching it a while, and then joining in on it off and on, on my own, I feel I can now safely share a simplified Tutorial on ‘The Train’ and explain to others (mainly newcomers to Guild Wars 2) what it is and how to be a part of it, if you wish to be.

Loading Screen for the Queensdale region, where ‘runs’ of The Train take place
(Click to see Full Size)

What is The Train?

‘The Train’ in Queensdale is, essentially, a cooperation of players moving and killing together as a group [in an MMO game?Whoknew?lol]. The Train targets a small number of Champion-type mobs [MOBile monsters], killing these same ones in a repeating cycle, again and again. The pattern [the “Route that The Train takes”] has evolved over time and differs little, no matter what server/shard you are on. Traveling and moving in collaboration with each other gives the result of faster kills, experience and loot for all those taking part (and sometimes the groups can get quite large). In Guild Wars 2, one does not need to ‘Party’ or form an ‘official’ group of any kind, in order to benefit from conquering enemies together [even when not following The Train]. Merely join alongside and help out a bit, and you too are now part of the Clique of Killing and can reap the rewards.

Even though The Train runs in the first leveling/adventuring area of the Humans (called Kryta), you can play any Race you wish, and then run/travel to the Human lands and be a part of The Train. There are no restrictions on Race interaction (no ‘sides’; no factions, no clans, no tribes [to restrict players]) in Guild Wars 2. Any race can be created and interact with any of the other Races in Guild Wars 2. So, be whatever race you want to be, you can still head to Queensdale and get on The Train!

When ‘on The Train’ (following the group around and helping to kill the Champion monsters), you do have to be a high enough level to ‘hit’ the enemies in order to register as a ‘contributor of the group’ and benefit from the encounter (get experience, be able to loot, etc). With the Champion mobs being ‘farmed’ [by The Train] averaging Level 10 in this region (these are the only mobs that The Train goes after, remember), you may not be able to actually hit them until your character is about Level 7 or 8; so if you are playing a brand new character, do some starting Quests, World Events or your character’s Storyline for a bit first.

Killing the Boar champion while on the Train in Queensdale
(Click to see Full Size)

If you are a ‘Brand New’ Player to Guild Wars 2, I strongly suggest doing that for the most part anyway (Quests and Storylines), as doing so, you will more easily learn how to control your character, fight battles, use your skills as you learn them, and learn to navigate the territories and develop your character as a whole.
The Train is, for the most part, a repeated cycle of killing [almost absolutely nothing but] a small number of Champion ‘boss’ style monsters (as in 5-6 of them, depending on the route The Train takes on your Server/Shard, remember it differs little) – and there have already been arguments all over forums and other websites as to whether relatively New Players should take part in it at all (and if it harms the gameplay/environment of newer players). I believe that this decision is up to each individual, as some people might eschew the practice completely until Level 80 (the current maximum level as of the time of this post), while other people will love the camaraderie and easy access to loot (you always get items comparative to your current level, whatever that may be, when the Champions die).
As with any game, there will always be people that will say a certain activity is too repetitive and boring, and there will always be people that will say it is a good source of ‘loot’, and there will always be people that will advise doing something else (like playing PvP or more PvE). I like to suggest, if people ask, that each person try Taking A Ride On The Train for themselves at least a few times, then judge whether they wish to continue doing it or move on to other things, leaving the choice up to each player.

[On a personal note for a moment, merely to address this matter that many people seem to argue about and state my own personal opinion, I myself enjoy roaming the lands of GW2 randomly, helping out NPCs and doing the little events found around the world. I play usually always play solo and that affords me the ability to change it up and do whatever activity I want, stop whenever I want (or if I get too tired physically and have to stop, due to my illness) and roam around taking [way too many] screenshots of the environs, gathering resources as I leisurely explore and discover the countryside. I often forget about the Storyline for my character – there is so much to do in the world; but I try to get in on it as I remember to and develop my character along with the story that is tailored for each Race. I do take a ride on The Train, but only as a ‘something else to do for a change’, not as my ‘main leveling mechanic’ or my ‘main source for items’. I like to think this off-and-on approach allows me to enjoy The Train while not getting too bored of it too quickly, all the while being able to enjoy the game at the same time, and it is just ‘another thing that I can do’ in the huge game world of Guild Wars 2.]

Killing the Troll champion while on the Train in Queensdale
(Click to see Full Size)

How does one ‘get on’ The Train? 

First, I always suggest to others, to get the Waypoints that The Train uses first. This will allow you to quickly relocate and follow The Train, travelling to the next Champion that is to be killed. If you did not create a Human, travel to The Human Lands and simply run to the Waypoints to open them up on your map and register them so that they can then allow you to return to them/use them in the future and for Riding The Train.

Don’t worry, there are only three main waypoints used in The Train’s generally-used rotation (and it differs only slightly on some servers/shards [for instance, on Eredon Terrace, “The Bandit” is very rarely killed by The Train – which seems to be the main difference for The Route from other shards – however, since I have created my character on ET, this is the example I will use]). The waypoints used and the route generally taken are all shown in this graphic I have created of the map of Queensdale below.

The Game Tips And More Blog’s Map of Queensdale and The Train Route as of April 2014 [Old Version]
(Click to see Full Size)

The Route that The Train takes usually runs like this (repeatedly):

  • Begin the Route from the upper right [the Double Orange Arrows on the map I created, above]
  • Kill the Boar champion in the hills there, NW of the Hunting Lodge
  • Fast Travel to the Vale Waypont and head into the caves just to the west
  • Kill the Troll champion inside the caves of Altar’s Windings
  • Fast Travel to the Phinney Waypoint and head NW to a glade at the edge of the trees
  • Kill the Rotting Ancient Oakheart champion at the forest’s edge
  • Fast Travel to the Krytan Waypoint and head NE, towards two large hills
  • Kill the Forest Spider champion on the larger hill, SE of the Hunting Lodge in a grove of trees
  • Run NW past the Hunting Lodge and up into the hills and wait for the Boar event again
A couple notes about the map: I made ‘tick marks’ (they look like little orange hyphens/dashes) that remind you of the order the champions are killed in and which Waypoint to take [-, –, —, etc]. I managed to capture and keep the ‘white dotted-line of travel’, running around following The Train, so if you are a bit lost, try to re-create the white dotted path that you see on my map. To help with finding the Forest Spider champion on a hill SE of the Hunting Lodge (and NE from the Krytan Waypoint), I put a small orange “S” where it is normally encountered. Lastly, my server/shard does not kill The Bandit Lieutenant champion [and we may be the only shard that doesn’t apparently], but if you wish to find him, he is in the Bandithaunt Caverns, N of the Vale Waypont.

The champion Boar shows up only after someone talks to Lodgemaster Carthage at the Hunting Lodge. There is a short event waiting period, then two hunters come out and slowly stalk their prey. Everyone usually waits in the hills to the NW of the Lodge and this can be a good time to go through your inventory, unpacking any goodies, salvaging, organizing, etc. There may even be some Banners nearby that can give beneficial Boons [“Buffs”], usually placed by some friendly Guild Member. Take a short break, get a drink – and get ready to jump back on The Train!

When you sit down and start to play a new gaming session, or if you have lost track of where to go next, you can always ask in Chat (/map) where The Train is at that moment, to know where to ‘get on’ (to join in). Most people simply type, “Train?” or ask “Where is the train now?”, and usually some kind soul will answer and state what stop The Train is at (what champion they are killing), or where they are heading to, at that moment. Common answers are, “Boar” or “Spider is up” or “waiting on Troll” or “at Oak”, for the various champions (it may differ slightly on your server, but not by much). Sometimes, a helpful person will suggest, “Head to __some champion__”, which means that the one they are currently fighting is almost dead, so you ‘might as well head to the next one’.

Killing the Oak champion while on the Train in Queensdale
(Click to see Full Size)

A few things to keep in mind as you ride The Train are: you have to be able to hit the mob in order to be able to loot it at all, therefore you may have trouble if you are much lower than level 7 or so (the mobs are Level 10). Loot will drop that is around your character’s level, no matter what it is, so you can usually use it right away or soon. The Boar portion of the Route takes a little bit to get started and sometimes people will say phrases like, “Boar is Walking” or “Hunters are Walking” or “Boar Starting” and so on, to let everyone know, who were most likely just standing around waiting or AFK, that the event is beginning. You can gather Resources that are around (mine veins, gather plants/food, cut down trees) or that you pass by, on your way to the champions, just don’t fall too far behind if the group is large – they can start to kill these Champions pretty darn fast – and you might miss out on the Loot Drop entirely!

Killing the Spider champion while on the Train in Queensdale
(Click to see Full Size)
That’s it! Try not to bore yourself with repeating this excessively, by the way. Have fun, enjoy the loot and camaraderie of fellow GW2 players; but if it starts to become boring, go back to your character’s story, pop in for some PvP or even do some Gathering, enjoying the landscape and beauty that is Guild Wars 2.

[UPDATE 1*** As of April 23rd, 2014 there seems to still be a lot of confusion as to the accepted/overall Route that The Train should take. There have been many arguments over what order the train will travel in and opposing groups will perform the run in awkward manner to each other. As a result, ‘finalized’ changes to this map and article will be delayed, until the community can solidify a pattern/route for The Train.
For now, “the basics” of what the Train is and does are secure and remain the same as this article. The Train may still run on your server/shard in the same manner, in general. Enjoy these aspects of this post, for now]
[UPDATE 2*** As of May 3rd, 2014 although there is still a bit of debating as to what should be a ‘standard route’ for The Train to take, a general consensus seems to be forming and this map and article will be redone and/or updated Soon™]
[UPDATE 3*** As of June 2014, although there is still some debate that occurs (mainly because someone gets to Oak ‘early’ and kills it on the group), most of the consensus appears to be this route: 
Boar-Troll-Bandit-Oak
I am working on a new, updated version of the map and will insert it here when finished.
For now, the rest of the information of this post (how to follow the train, etc.) is still valid and hopefully found helpful, for those who are interested in knowing what The Train Of Queensdale is and how to do it]

See You In The Game!

DESIGN ROOM FOR SCIENTIST/GENIUS TEENAGER’S

For today, we have compiled a series of five images that represent the Teenager’s Room Scientist/Genius. We try to choose different: we went with serious internal and sober, but also gave him a shot at the famous and very popular brown, and white. All rooms are practical, with work spaces, small libraries and shelving systems for books and CDs and fine cabinets specially designed for Scientist/Genius teenagers.

Teenager’s Room Scientist/Genius Themed

Teenager’s Room Scientist/Genius Themed

Last but not least, we believe that the Albert Einstein Pictures is a required element in the bedroom of a Scientist/Genius teenager’s, although some of the pictures below, you will realize that they have a special status. Even if all design ideas have a particular theme rooms, the furniture is very close to each other to create interiors that are functional and aesthetic. Take a look!

Teenager’s Room Scientist/Genius Themed

Teenager’s Room Scientist/Genius Themed

How I Decluttered my Inbox

I try out new apps constantly, but it is rare that I find one that I consider a game-changer — one that revolutionizes how I do something and boosts my productivity.

Meet Mailbox.

Mailbox works with iOS mobile devices (iPhones, iPads) and GMail, and it can handle multiple GMail accounts. The idea is that your email box should always have ZERO messages in it, and it helps you achieve that goal by giving you four options for each message in your inbox.

Big-swipe to the left: Add to list

So many of the emails that I receive are ones that I don’t need to respond to immediately, and Mailbox understands that by allowing you to file messages as low-priority action items. It has three main lists:

  • To Read — great for newsletters and other items you’re interested in reading at some point but not necessarily the second that it arrives in your inbox
  • To Watch — my husband and some friends will sometimes send me YouTube videos that I can’t watch at work — not because they’re NSFW, but because YouTube is categorically blocked at my school. These videos also tend to be low-priority items.
  • To Do — emails of things to add to my “to do” list

It also gives you the option of creating additional lists. I made the “To Buy” list, for example, for items like subscription services that are going to expire sometime soon that I need to renew or for wishlist items that I’m thinking about buying someday. 

Short swipe to the left: Defer

Sometimes I receive messages that I want to deal with, but not at the time I’ve received it. When I’m using my iPhone, for example, I rarely respond to email because I prefer typing on my laptop. Some emails are ones that I’ll look at more closely at night or over the weekend when I have more time. Other emails are ones that I want to deal with at a specific future time or date. Consider these examples:

  • a coupon for a clothing store that I might use but is only valid for a certain week in the future
  • a confirmation email for an upcoming trip or conference

The beauty of the Mailbox app is that you can set the exact date and time when you want that message to reappear in your inbox by letting you “Pick Date.”

The message will reappear in your inbox at the date/time you specify so it can get your attention rather than just getting pushed to the depths of your inbox to be forgotten.

Short swipe to the right: Archive the message
I might want to look for it someday, but it’s not something I need to act on.

Long swipe to the right: Trash the message

Mailbox is a free app in the iTunes store, and in the three weeks that I’ve had it, it has replaced the default Mail app on my iPhone and completely changed the way that I manage email. I’ve gone from having literally 1,000s of emails in my inbox to having ZERO. It’s the first time I’ve ever felt like I’ve been on top of my email situation.

The iPad version just came out this week, and I’m using that a lot, too. It has a larger interface, but all of the same features. Here’s a screenshot of it on my iPad:

You can see that I have one message in my inbox — a coupon that I have to use this weekend if I’m going to use it at all. I’ve deferred 14 messages — some that I’ll reply to on Tuesday, others that I want to deal with once I’m completely done with school on Thursday. I’ve got some lists, but I can also check the archive or the trash in case I accidentally swipe something into the wrong place and want to move it back out.

If you click on a message in your inbox, an image of it will appear on the right so you can decide what to do with it. It’s a very easy-to-use and intuitive app, and now that I have it, I can’t imagine giving it up. It’s a huge asset to my productivity, and my only wish is that I could use this with other email platforms — like my school/work emails — that aren’t GMail accounts.

Have you tried Mailbox yet? I’d love to hear about how you manage email productivity in the comments below.

Hope you’re having a great Memorial Day weekend!

What is the Best Way to Warm-Up?

There is a lot of controversy and conflicting opinions on what you should do for a warm-up for exercise.   One of the reasons is that warm-ups should vary based on the activity you are preparing for and your level of fitness.
As the name implies one of the key goals in warm-up is to literally raise the body temperature and gradually ramp up the cardiovascular system to be prepared for harder efforts.     The length of warm-up should be based on the intensity of the activity.     Low intensity activities like moderate pace walking really require no specific warm-up as you can simply ease into the activity itself as a warm-up.     For activities like competitive athletic events that involve high intensity effort the warm-up should be longer.
In the same way, you have to consider your fitness level because a warm-up for a highly fit individual may be relatively high intensity exercise for a deconditioned person.
For all warm-ups, a 1 – 5-minute period of escalating cardiovascular exercise that raises heart rate and body temperature is advisable.    For high intensity athletic events this should be extended until the athlete breaks a sweat without being fatigued.   
This literal warm-up can be done on a cardiovascular exercise machine or via dynamic bodyweight exercises like squats, lunges, planks, push-ups, etc.    
Once you raise body temperature you can include some dynamic stretching with an emphasis on movements that address key joints and muscles involved in the actual activity you are warming up for.   For example, for tennis warming up the shoulder joint and surrounding muscles is important while for cycling this is less relevant.
 A Proven Warm-up Protocol
Warm-ups for sports participation have been researched and there is one in particular protocol that is proven to reduce injuries by improving muscle strength, balance, and coordination.    This protocol is called the FIFA 11+ Program and involves doing 15 exercises.    For a complete how to guide click here:  https://www.slideshare.net/PedMenCoach/fifa-11-warmup-to-prevent-injuries 

Although this protocol was developed for soccer it can easily be modified to fit just about any competitive sport!

The Secret Knowledge of Fourth Graders

As I was reminded in reading all of the June Currently’s, not everyone is on summer vacation yet. So for those of you who are not yet enjoying time off, I wanted to share a fun creative writing activity that works well for the end of the year.

One of my favorite books to share with students is The Secret Knowledge of Grown-Ups by David Wisniewski.

In this highly-entertaining book, Wisniewski takes several “rules” that children often hear — like “eat your vegetables” — and explains the real reason that rule exists. For example, we don’t eat our vegetables because they make us healthy. The real reason we eat them is to stop them from rising up and taking over the world! Or, we don’t brush our hair to help us look neat, we do it to stop the hair from growing back into our heads and crowding out our brains. The book is filled with hilarious examples and colorful illustrations that my students loved.

I read excerpts from this book over the course of a couple days, and several of my students looked at it in their free-time. We then set out to write our own examples for a class book entitled “The Secret Knowledge of Fourth Graders.”

Here are some of the “rules” students wrote about:

  • Why you need to read “Just Right Books”
  • Why we use number 2 pencils on tests
  • Why you can only check out 2 books from the library at a time
  • Why we take AR tests
  • Why it’s important not to be tardy
  • Why we return library books on time
  • Why we have homework
  • Why we use pencils instead of pens
  • Why we don’t bend the pages of a book
  • Why we stack chairs at the end of the day
  • Why we take standardized tests

The creativity in the “real” reasons why we do these things was fantastic. Here’s an example from one of my students:

We wrote our final drafts on our iPads in Pages using the Visual Report template. That helped tremendously with the formatting.

I’m planning to share several of these examples with my students next year, and I will definitely do this activity again. My students enjoyed it so much that several of them were talking about making other “spin-off” books such as The Secret Knowledge of Minecraft Players or The Secret Knowledge of Readers. I’m sorry that I didn’t get to see how those turned out as well.

If you’ve never read The Secret Knowledge of Grown-Ups, I highly recommend it. It’s great for sparking creative writing ideas, and it can provide a fun writing activity in the late stages of the year.

What are some other school rules you can envision your students writing about? I’d love to hear your ideas in the comments!

5 Reasons to Flip Your Math Class

Of all the subjects, math is probably my favorite to teach. But it is definitely not easy. By the time students are in fourth grade, there’s often a wide range of abilities. Last year, I had students who could barely add and subtract and others who were working well beyond grade level. Trying to design lessons that worked for them was a real challenge. If I moved too quickly through the lesson, several students would get lost. If I moved too slowly, others would get bored and start causing different problems.

Then I attended the Georgia Educational Technology Conference and heard some sessions about flipped teaching, and a lightbulb went off.

If you’re not already familiar with flipped teaching, the idea is that we need to “flip” the traditional way we teach — lesson at school, practice problems at home as homework. Instead, students should watch a short video lesson as homework to prepare for class, and then the majority of class time is spent working on practice and application while I’m there to guide them.

I did this pretty consistently for the second half of the year, and I couldn’t be happier with the results. There were so many advantages.

1. Students became more confident.

For some kids, math can be intimidating. Everyone works at different speeds. What may be an obvious concept for one kid may take multiple explanations for another. There’s lots of vocabulary and room for mistakes, and when you feel like other kids are getting it faster than you, your confidence suffers.

All of this went away when I flipped.

Students were watching the videos at home on their own. No one knew whether they needed to replay something a couple of times until they got it. No one knew that they had to pause the video for 5 minutes to try a problem that others would have solved in 30 seconds. They could all work at their own pace, and they came to class more confident and prepared for practice the following day. The attitude shift in my students this year was reason enough for me to continue flipping.

2. Parents were less stressed.

There have been so many times when I’ve heard parents complain about math or express their discomfort in helping their child because they weren’t taught math the way we teach it now. And I get that. I remember thinking in my math methods courses that I could have been great at math if someone had explained it to me better as a child rather than having me memorize algorithms.

Having the flipped model created allies from a lot of math-hating parents. Some would watch the videos along with their children and have those lightbulb moments where concepts and strategies would suddenly make sense. Others expressed a sense of relief that they didn’t have to worry about “undoing” the things we were doing in the classroom by just jumping to the standard algorithms. We were all more comfortable with the math.

3. I had more time to see what students could actually do.

While I always tried to keep my in-class mini-lessons short, there were days when they would drag on because some kids just weren’t getting it. By the time I felt confident they could try some problems on their own, we hardly had any time left. And by the time they got home to do it as homework, they’d forgotten what we’d spent the morning talking about, so they were back to square one.

Now that I’ve flipped, I only need 5-10 minutes maximum at the beginning of my math block to do anything whole group. I spend that time answering questions, clarifying any misconceptions, and checking the 1-2 practice problems that I typically include at the end of the video. The rest of my math block was then spent working with small groups, conferring with kids, and getting into richer practice and problem solving than I could ever fit in before.

I also didn’t have to worry about students getting the right answers only when their parents “helped” them. When it came time for assessments, I had a much better sense of where my students were at and what to expect from them because I was more deeply involved in their learning.

4. I didn’t have to worry when we had a sub. 

In the past, I would write off sub days as lost instructional time when it came to math. Now that I’ve flipped, that is no longer the case. I include a link to the video I’ve created in my sub plans, and I have the sub watch the video with the class again to start the lesson. Usually that gives the sub enough background knowledge to help with the learning task, and my students have enough scaffolding from my instruction that they can work through the practice. It made those lost days so much more productive.

This year, I will be on maternity leave for 12 weeks, so I’m nervous about what will happen with my kids while I’m gone. But I’m less nervous about the math because I already have videos made for most of those lessons from last year. My students will have continuity in math instruction because of it.

5. Students were more successful and could tackle bigger challenges.

Last year was my best year ever as far as student performance on end-of-year assessments and benchmarks. I think a big part of that can be attributed to the move toward a flipped model for math. My students had more time and confidence to master the fourth grade standards, and as a result, I was easily able to push them into bigger challenges. When I surveyed the students mid-year about the flipped model, their responses were overwhelmingly positive in support of it, and I knew it was something I need to continue in the years ahead.

Next Steps

This will be the first year that I use the flipped model for the whole year, so I will need to prepare more video lessons and give some thought to how I’ll transition my students (and their parents) toward this model. In the weeks ahead, I plan to share more about the tools I use to create flipped lessons and some troubleshooting tips for problems that might come up.

Now that I have some experience flipping, I’m going to go back and reread Flip Your Classroom: Reach Every Student in Every Class Every Day by Jonathan Bergmann and Aaron Sams. Jon was one of the speakers I saw at GaETC, and he’s one of the founders of the flipped classroom movement. I read the book quickly as I started to flip, but I think there are more ideas to be pulled from it.

I’m also starting to think about other areas where I could flip instruction. One possibility might be some of the grammar, vocabulary, and word study components of my ELA block. I consistently struggle to fit everything in to that time, and flipping might be the answer. I’ve downloaded the book Flipping Your English Class to Reach All Learners: Strategies and Lesson Plans by Troy Cockrum, and I’m hoping that will give me some more inspiration.

Have you tried flipping any parts of your instruction? I’d love to hear more about your ideas and experiences in the comments!

My Trip to Batticaloa

This assignment required me to travel to Batticaloa which is in the eastern coast of Sri Lanka. The drive to Batticaloa is long (About 320 KM) but the killer is that it takes nearly 8 hours to get there. I left at 6.15 AM from Colombo and arrived at 2.15 PM in Batticaloa; stopping only for Breakfast and a cup of tea.

The assignment was 10 day evaluation of the management capacity of an organization who was delivering services to the people of the eastern province. The unique aspect of this assignment was that the client wanted to evaluate very specific aspects of its organization management structure, financial management, HR management, monitoring and communication systems. Therefore I had to customize the tools we used to a very high degree to ensure that the tools we used were compatible with the specific need. It also meant that this level of customization was a green field (Not done before so don’t know the pitfalls) this was further complicated by the fact that the execution of the assignment had to have a tri-linguistic person to facilitate the field work as well as translate at the synthesis workshop.

The assignment went in a smooth manner and it was well received by the employees of the organization. Generally management capacity evaluations can get tricky as some managers take it as a personal weakness and get very defensive.

I was surprised at the weather in Batticaloa and the amount of water on the ground. The roads that went through the lagoon were nearly inundated. Some of the shorter routs to Batticaloa were flooded so I had to travel via Polonnaruwa. In terms of the post war development in the east; I must say that all the reports regarding infrastructure development are correct and perhaps under reported. Road, bridge and utility projects are still going on and the whole of the eastern province looks like one giant construction site.

The fishing industry is booming in Batticaloa and the seafood prices are less than half of what it is in Colombo. So the team had seafood at every opportunity. The tourism industry has a demand but the number of rooms available seemed to be inadequate for the demand. There is a dire need for quality hotel rooms in Batticaloa. The availability of jobs would be the main social issue in the coming months as the construction industry starts to finish the construction projects.

I have to travel to Wadduwa (from Batticaloa) to attend the 6th South Asian Regional Workshop on Resource Mobilization which starts today; so will be on the road for the rest of the day.

The Best Text for Teaching How to Write and Revise Leads

My fourth graders hate revision. They’re often offended by the mere suggestion that they hadn’t nailed the perfect lead to their stories in their first draft.

I’m used to this. I see it every year in writer’s workshop, especially at the beginning of the year when we’re writing in a genre for the first time.

And every time I see this, I become more determined to break them of this thinking.

Today, we were working on the Common Core State Standard W.4.3a – Orient the reader by establishing a situation and introducing a narrator and/or characters; organize an event sequence that unfolds naturally.

My favorite story to use for this is standard — especially with fourth graders — is The Teacher’s Funeral by Richard Peck.

This book, set in a small Indiana town with a one-room schoolhouse, has the best opening line of a children’s book ever.

If your teacher has to die, August isn’t a bad time of year for it. 

Richard Peck keeps it going from there, building an incredible introduction. You can read the entire first chapter here.

Today, I started our writing lesson by reading this chapter to them. I have the Kindle edition of the book, so when I read it, I can project it on our ActivBoard so the students can follow along as I read. They laughed throughout the intro and were immediately hooked, begging me to choose this as our next chapter book read-aloud. Score one for the objective of “hooking your readers!”

I then asked them how many of them thought that introduction was the one that was in the first draft of his book.

One or two hands went up.

Richard Peck shared in an article called “In the Beginning” (Horn Book Magazine, September 2006, pp. 505-508) that it normally takes him 24 drafts of his lead before he’s happy with it. TWENTY-FOUR!

And here I’m asking my students to take a second pass at their writing.

I shared that little nugget with my students before we reread the first chapter. As we read if for a second time, we focused on the characteristics of his writing that made it such a great lead.

Here’s what my students noticed, compiled into an anchor chart:

Once we finished the chart, I had them go back to a piece of writing they’ve been working on and try to write a different introduction. Some students tried changing the point of view, others jumped into the action or started with dialogue. Whatever the strategy, all of them managed to produce a new version of their introduction, and all were at least a little better than what they’d started with.

We’ll get this revising thing down eventually…

What are some of your favorite books to use to teach students how to hook their readers? I’d love to hear about them in the comments!

How to Get Rid of Cellulite

Although the vast majority of woman have some cellulite somewhere on their body – nobody likes it!   So what the heck is cellulite anyway?  Cellulite is pockets of fat that have squeezed between bands of tissue, called septae, that are located below your skin.

Women of all races get it, while virtually no men do. That’s because the septae of men are different from women. Men have stronger bands that are cross-hatched allowing them to keep fat in place more effectively. Women have weaker, vertically oriented septae that allows fat to squeeze through easier.

Both thin and heavy women have cellulite. However the higher your level of body fat the more noticeable the dimpling will tend to be.  Unfortunately dieting does necessarily help eliminate cellulite. Losing weight helps sometime, but in some cases weight loss makes cellulite worse.   This occurs when skin becomes saggy after significant weight loss.

There is a definite genetic component to cellulite which does run in families.
Hormones also are part of the equation with cellulite, but science has not figured out exactly how hormones contribute to cellulite.  What is known is that cellulite starts at puberty which is a time that many hormone levels change significantly in females.

Getting Rid of Cellulite

Getting rid of cellulite is easier said than done.  Even treatments like Liposuction are not necessarily effective.    In fact Liposuction often makes cellulite worse by leaving your skin even more puckered looking than it was before.

Dermatologists are quick to point out that there is no magic cure for cellulite, but there are ways to make it look better!   Two of the keys are working out and dropping excess weight sensibly (1lbs per week! – faster weight loss can exacerbate the problem!)

Resistance training is key.   As you increase your muscle size and decrease body fat your skin looks smoother.     If you lose fat while you simultaneously build muscle your cellulite will improve.
It is also important to work on the health of your skin as you age to make it more elastic so that as you lose fat the skin pulls tight rather than sagging.    

Certain topical treatments that increase collagen in the skin, like Retin-A or creams with retinol or vitamin C, cannot hurt and may help.   

Maintaining adequate water intake is also key for skin health and elasticity – 6 – 8 glasses of water per day is key.

If you have faithfully tried everything and your cellulite is driving you crazy and you are prepared to spend some serious dollars – Cellulaze – is an FDA approved therapy.  Cellulaze involves inserting a lazer under the skin and projects heats in three directions and literally liquefies fat as it cuts the septae around fat cells which can reduce the puckering while also encouraging collagen regrowth.

Cellulaze claims a 70 – 80% improvement in cellulite that lasts a full year.  It is most effective for active women with mild to moderate cellulite who are not significantly overweight and who also have good muscle tone.

Unfortunately, Cellulaze is not cheap – costing $5,000 – $7,000 depending on the size of the area being treated.

My Trip to Male, Maldives, September 2010

The trip to Maldives was a business development trip. Most people just come to Maldives and stay in a resort and go back. I was lucky to see the Maldives by land, sea and air; as well as spending time in Male. I recommend all to see Maldives in all its glory

View of Water Villas.

View of Maldives by Air (Sea Plane)

Not only did I snorkel but I also went on the “Whale Submarine”

As a sprawling archipelago Maldives (I traveled from Male to the northern most inhabited Island and back to Male) is a breathtaking destination. However, I was shocked to see poverty in the Maldives with a population of just over 300,000. I guess corruption and discrimination is rampant in this tiny nation as well. I must say that Maldives presents a unique problem to any government in having to deliver services to small populations spread across 200 islands (Out of 1192 Islands spread across 90,000 square kilometers)

I believe the only solution is to embrace ICT and use it to reach every person. However, having said that; the ICT literacy among the Maldivian population is also very low. A real chicken or egg situation for the politicians of Maldives to solve. If ever there was a country which can be considered easy to develop it must be the Maldives.

The weight question

‘Those desiring to lose weight should perform hard work before food. They should take their meals after exertion and while still panting from fatigue … They should, moreover, eat only once a day and take no baths and sleep on a hard bed and walk naked as long as possible.’

Theories on the weight-loss benefits of walking around naked and not bathing have not been proven, but Hippocrates’ other dietary advice isn’t completely off the wall and shows that even 2,400 years ago, the relationship between food intake and energy expenditure was recognized.

Diet Start

Today ‘obesity’ is becoming universally recognized as a disease in its own right. Obese and overweight are terms that are often used interchangeably, but let’s clarify the difference between them:

¨ Overweight refers to an excess of body weight and includes all tissues, such as fat, bone and muscle, but not just excess body fat.

¨ Obese means that someone is carrying an excessively high proportion of body fat that could compromise their health.

If you are an athlete or body-builder, you may weigh more than the desirable weight range for your height, but this is normal because muscle weighs more than fat. Equally, you may be a relatively sedentary person who weighs in at the correct weight for your height, but who still carries too high a proportion of body fat. In this case, a good exercise programme is vital.

For those of you who feel that you are more ‘lard’ than ‘hard’, and don’t like what you are seeing on the scales, a better way of calculating just how overweight you are is by working out your Body Mass Index (BMI).

You can tell if you have surplus body fat simply by seeing if you can pinch more than 2.5cm (1 in) on your hips, tummy, underarms and back.

Alternatively, get your doctor or gym instructor to check out your BMI using callipers, or buy a set yourself from your local pharmacy. If you have more than 25 per cent body fat, then the chances are that you are carrying too much weight, or at the very least need to change your diet and participate in exercise that will burn fat and build muscle.

Successful weight loss and healthy weight management depend on sensible goals and expectations – losing just 5-10 per cent of your weight is the kind of goal that can help improve your health.

You may be wondering how you have got this far without hearing about calories. But you don’t need to become obsessed with the calorific value of everything you put in your mouth. Instead, it is much better to check food labels to see if the food contains unnecessary additives, sugar, hydrogenated fats and salt – and, of course, how high the carbohydrate content is.

Men’s Body Click Diet part 2

What I’m giving you here is a chance to climb the ship’s mast with me so that from its top we can see far over the horizon of medicine. The view from the masthead is based not so much on my daily activities as a practicing physician but on my mission to search the seascape of scientific research for courses that can help prevent my patients from developing prostate trouble. What I see from the top of the mast is a body of evidence that is solid enough to support these simple changes in behavior, especially considering that there’s zero risk in consuming flaxseed and soy protein.

The best evidence is based on studies done in a couple of places in the world, where prostate troubles are rare. Solid epidemiological studies that show a lower incidence of prostate cancer in men consuming foods popular among Finns and Chinese — rye bread for Finns and soy for Chinese.2 And he has carried out elaborate chemical analyses and experiments to show which substances in these foods provide the protection.

For years before his research was done, it was assumed that the Finns’ genetic history accounted for their lower incidence of prostate cancer. Most modern Finns come from a small number of people who migrated to that part of the world many years ago, so they are a rather distinct linguistic, racial and genetic group. It turns out, however, that it’s not their genes but their diet that protects them against certain cancers. And the dietary factor that is most significant is a sourdough rye bread that is eaten by people consuming a traditional Finnish diet. This whole-grain, heavy- duty bread is made out of ground whole rye seeds without anything removed. The leavening is provided by lactobacillus (acidophilus) instead of yeast, which is used to leaven almost all bread consumed in other parts of the world. What’s key is that the rye fiber contains lignans that modulate hormone chemistry and reduce the risk of reproductive cancers.

Diet Start

Eastern Europeans have traditionally used flaxseeds as a source of food and medicine. Flaxseed oil, which makes up about one-third of the weight of the seeds, has extremely healthy properties that also provide particular benefits for the prostate gland. But here we’re talking about the fiber in the flaxseed. The best way to use the seeds is to grind them in a coffee mill. You can then consume the fine, fluffy powder as part of a shake or add it to a variety of other foods. Your aim is to eat a heaping tablespoon per day.

Besides rye and flaxseed, there are other foods that contain lignans. Some of the best sources include legumes (especially lentils, kidney, fava and navy beans), seeds (like sunflower seeds), seaweed, cereal brans and whole grains.

There is also a solid body of evidence supporting the role of soy protein in reducing the risk of prostate cancer. For example, research has shown that isoflavones, substances contained in soybeans, modify testosterone metabolism, decreasing the risk for both benign prostatic hypertrophy and prostate cancer.3 Incorporating soy protein in your diet doesn’t require you to change what you eat, although it’s fine to eat more tofu, miso and other soy products if you enjoy them. The simplest, quickest way to consume soy protein is by stirring soy protein isolate, a relatively tasteless substance, into some of the food you are already eating.

Foods like soybeans, flaxseed and rye contain information derived from phytonutrients, which keep animals in synchrony with the rhythm of the seasons and which have profound effects on our own reproductive systems.

Prostate Inflammation or Nonspecific Prostatitis

Your prostate gland usually doesn’t speak to you until it’s in some advanced state of trouble. When it does, it has only two voices. One is expressed through pain or difficulty with urination and the other is just plain pain, which is almost invariably felt in the midline of your body. The spectrum of difficulties includes inflammation, enlargement and cancer. While there are more or less pure representations of each one, the lines between them are often blurred. All three, but particularly enlargement and cancer, are addressed by the preventive measures included in the Body Clock Diet.

Let’s start with inflammation, which is the medical term for some combination of redness, pain, swelling and heat that almost always accompanies infection but may also represent your body’s reaction to noninfectious irritants or allergens. The flame of prostate inflammation is experienced as burning with urination. This is as much a result of inflammation of the tube through which the urine passes out of the penis (the urethra) as it is due to inflammation of the prostate, per se, which lies astride this tube, just beneath the bladder. Germs that infect the urethra, such as the gonorrhea germ, may ascend it and get into the prostate gland. There, the alkaline environment and blood supply, which are conducive to bacterial growth, make it much harder to treat the infection with antibiotics than, say, a sore throat, a boil or an uncomplicated pneumonia. Because the germs that infect the prostate are difficult to extract from apatient for a culture it has become a common practice for doctors to treat symptoms of prostate inflammation with antibiotics without knowing what germ, if any, might be there.

The diagnosis in this situation is ‘nonspecific’ prostatitis, which is a well- accepted medical term. But when you stop to think about it, it’s peculiar. According to medical principles, when there is an infection, the perpetrator is almost always a particular germ. The prostate, like all internal tissues, is not likely to be infected by more than one germ at a time. The implication is that if there’s an infection, it’s quite specific. How then do we come up with the diagnosis ‘nonspecific’ prostatitis? It’s a result of several factors; efforts to recover a germ are to no avail, the prostate acts as if there’s an inflammation — with swelling, pain, difficulty urinating and sometimes cloudy or pussy urine — and antibiotics are at least temporarily soothing. But after antibiotic treatment, this problem recurs more often than other infections.

Knoxville News Sentinel featuring Kurt and April Nitzsche

Knoxville News Sentinel featured WORKOUT ANYTIME owners Kurt and April Nitzsche.
The online article includes a great picture of April showing one of her clients, how to use one of many exercise machines at the Maryville location. The story also ran in the print edition on the front page of the business section with a large two picture spread of Kurt and April.
April Nitzsche explains to Robert Ridenour how to use one of many exercise machines at the Workout Anytime in Maryville on Thursday, January 16, 2014. April and her husband Kurt Nitzsche are the franchise owners of the Workout Anytime in Bearden and are now expanding into Maryville with their second location.         (SAUL YOUNG/NEWS SENTINEL)
You can view the online article here. 

INTERIOR DESIGN IN BANKE HOTEL

BANKE HOTEL

BANKE HOTEL ROOM DESIGNBANKE HOTEL ROOM DESIGN

BANKE HOTEL DESIGNBANKE HOTEL DESIGN

The Banke Hotel is recently installed in the Opera district in Paris-a first for the prestigious hotel chain Derby Hotels Collection. As its name hints at the Banke Hotel is the story of a metamorphosis. That of the body of a conventional bank Haussmann in a luxurious hotel of 94 rooms – which harmoniously blend the baroque style and design

LIVING ROOM DESIGN IDEAS GET COMFORT

LIVING ROOM DESIGN IDEAS

Living room is the most popular rentals for guests and where families come together to end their days of rest after a long week at work or enjoying a TV program together. In most cases, this room is on the floor of a house and is very active. It is therefore essential that this area is decorated in a pleasant environment to ensure the comfort of visitors. When planning a room design, the main and most important factor to decide is the purpose of the room. One thing to remember when designing your living space is that you should feel comfortable in the room and the style, since they will likely spend most of their time in the room. Finally, here are some design ideas that show really got in touch with the style you want.

LIVING ROOM DESIGN IDEAS

LIVING ROOM DESIGN IDEAS

LIVING ROOM DESIGN IDEAS

LIVING ROOM DESIGN IDEAS

a passenger train in India had a most unusual issue, 22 carriages carrying 1000 people, got disconnected from the engine, and the emergency brakes didn’t work to stop it, it rolled backward 7 miles

http://www.bbc.com/news/av/world-asia-india-43697965/engineless-runaway-train-in-india-gives-passengers-a-scare

My Trip to Dhaka Bangladesh

I arrived in Dhaka, Bangladesh on the 24th of March for my next assignment on Financial Management Systems. The organization contracting me has some issues with its financial management system and has received recommendation from the auditors to fix these issues. Further they want to conform to the South Asian Federation of Accountants Standards. So my task is simple. Document the existing practices at the organization and get agreement on the current practices and then recommend changes and improvements to the system.

Well even though it is simple there can be quite a few things that can pose a challenge to this type of assignment. I already encountered one on the first day of my assignment (25th); which is, in a group of around 20 finance staff it was quite difficult to plot the current financial practices using flow chart symbols as non of them knew the current system in its entirety. It is still work in progress and I hope to have it pinned down during the next working day which is Saturday (Bangladesh uses the Islamic calendar); where the staff have agreed to come to work.

The last time I was in Bangladesh was way back in January of 2008; so it was good to come back to Bangladesh and to see how things are. I must say that the only thing that looked to have changed is in fact the increase in motor traffic. It takes for ever to commute on Dhaka roads. I am staying at the Ambrosia guest house in Dhanmondi where I stayed during my earlier visits to Dhaka. It felt good to be here where the staff recognize and remember you after a long absence; it really does feel like home when you are greeted by familiar faces.

Looking forward to the next few days of the assignment; it is scheduled to end in early April and then I have another assignment lined up in the Philippines.

Battlefield Play4Free – PlayTesting The XM8AR LMG (3 Full Rounds – Myanmar, Dalian) Raw Gameplay [Unedited] Gameplay Video

Battlefield Play4Free is a Free-To-Play title, where it doesn’t cost anything to join in, but you can purchase weapons, armor, clothing and other items for Real Money by purchasing Tokens (now called Play4Free Funds) that you can then use in the in-game Store. There is also a nice feature where you can win prizes (weapons, armor, clothing, etc) from a game called The Daily Draw, where you choose a card from a random draw of eight and it will generate an item for you.

The items range from temporary one-day use weapons and clothing, to seven day usage, to permanent items your character (Soldier) can use in the game forever (for example, a scope that can be attached to a gun for that soldier for all time). This is great for those who can’t afford to purchase many in-game items, as it not only offers the possibility of getting some great gear ‘forever’, it also gives a nice preview of a weapon, mod or clothing, so that you can see what it will look like/feel like, if you decide to splurge and purchase it for yourself (supporting the game and developers as well) sometime in the future.

I recently won the XM8AR in The Daily Draw (for one day of use) on my Medic and thought I’d try it out and see how it felt and quickly write a post about it [I’ll call these PlayTests]. I am not a gun expert or know a lot about the statistics of the guns, but I will discuss briefly here how the gun actually feels and plays, especially compared to the Medic default, the MG3 Light Machine Gun. I played a few rounds with XM8AR LMG and recorded the first three full rounds. Here they are, shared unedited for you [a ‘Raw Gameplay’ video]:

Recorded with: Bandicam @1080p (HD) using the x264/H264/AVC Codec
Recorded game: Battlefield Play4Free (MMOFPS, a F2P game/Microtransactions)
Recorded levels/maps: Myanmar (Jungle, Assault), Dalian Plant (Rural Industrial Port, Defense then Attack)

[YouTube did something with the Aspect Ratio of this video and I had to use a command in the Tags section to fix it. Let me know if anyone has problems viewing this video properly]

Normally locked until Level 15, the XM8 felt great to use on my Level 10 Medic. It’s ammo box is a little smaller at 60 rounds (vs. the default Medic’s MG3 having 80 rounds), but it never felt ‘cramped for shots’ and didn’t feel like it took too long to reload.

The XM8AR Light Machine Gun is normally locked and cannot be used until your Soldier is Level 15, unless it is bought outright or won in The Daily Draw. Click to see Full Size

The nicest thing about the XM8 was the accuracy. You could really tell you were going from the “Low” rating of the Medic Default MG3 to the “High” rating of the XM8AR.

Comparison of basic stats between the default Medic gun, the MG3, and the XM8AR

Looking down the sights, the three-prong irons of the front sight are quite thin and easy to line up in the view of the rear sight, which is in the form of a circle. There is only a little bit of a pull up and slightly to the right, but the recoil is very small and easy to compensate for once you get used to it. I even felt comfortable shooting from the hip and at a distance because this gun felt so darn accurate compared to the starting weapon for a Medic.

The thin front prongs of the iron sight feel easy to line up for targets farther away and the XM8AR feels like it is very accurate, as can be seen by this Headshot from across a courtyard in Myanmar. Click to see Full Size

An all around great gun, it was fun as hell to use for a day. For only 300 Credits you can try out for a day of play, too. If you have 1250 spare Play4Free Funds you can purchase it permanently. It is a nice accurate gun to run with and may be worth it. Try it out for yourself sometime.

Have fun and See You In The Game!

Disclaimer: Any gameplay videos or animations uploaded are only one example of one possible path of game play and is not representative of the gameplay experience of the entirety of the game material as it is non-repeatable in exactness (movements, actions, viewpoints, etc) to a high degree of accuracy (especially in regards to online multiplayer play and interactions) and therefore is not a representation of a large portion of the game content (this includes complete Walkthroughs/Playthroughs, Raw Gameplay Footage and Tutorials). All material and content uploaded attempts to respect copyright and is presented for Educational and Entertainment purposes only, utilized under Fair Use and can be construed as Free Advertising. No copyright infringement is intended and cannot be inferred. Any possible representation approaching any infringement, to those seeking infringement action, requires double notification and will be honoured by permanent removal of the infringing material. This information exists for entertainment and educational purposes only and is not a substitute for medical attention.

My trip to Dhaka, Bangladesh

It was quite an intense process to pin down the existing system. It existed in bits and pieces in various places of the organization managed by different people in the structure. It was quite unique to find an organization with a finance management system spanning from resource mobilization (Income generation, contracting and applying for donor funding) to implementing through 3rd parties (implementation through contractors as well as other civil society organizations) but not to have it documented any ware. It was a tough job to get agreement on the current practices as well, as each individual seems to have tweaked it to suite his/her requirement. Finally we documented the entire system as the minimum agreed common current practices.

This is typical of an organization which has grown organically and reached a point that does not allow it to grow any further without structure and form in its organization structure and systems. As a result of this the assignment has ballooned into a much bigger assignment as the organization needs basic guidance regarding system development and management. I was also able to analyze the system and suggest some key improvements (fundamental stuff really) to instill the use and management of the system. The client has now requested that I support them in the preparation for implementation which needs a lot of pre planning and documentation in the form of developing policies, manuals, forms, job descriptions, task calculation etc. It also means that we have to design the administrative and functional structure so that the organization can manage a decentralized finance function spanning the entire spectrum of financial management.

I left Dhaka on Friday and headed back to Colombo. The flight from Dhaka to Bangkok on TG was fine and operated on time. I had a 5 hour stay in Bangkok before I took the flight to Colombo. I must say that I don’t find the new airport at Bangkok as passenger friendly as the earlier one. The new one however is big and posh but it has lost some of its coziness in my opinion. As usual the Colombo flight was delayed for over a half an hour and once in Colombo had to endure the long queues at the emigration counter.

I am back in Colombo and back at work to finish another assignment (OCA) I took concurrently and had a junior consultant do some parts of it. I have to send its draft report by the end of business 6th April. My next assignment is going to be in the Philippines and looking forward to it as it will be my first assignment in the Philippines.

BLACK WALL INTERIORS DESIGN IDEAS FOR A MODERN HOME

Are you brave enough to try a deep impression on the black walls at home? A dramatic effect can be created on the walls of blacks is unique, and it takes courage and commitment to create an interior decorated with beautiful black walls. A black-painted walls, chalkboard walls, elegant black background, or even some black accents can change the look of the interior.

High ceilings and lots of natural light conditions seem to enjoy blacks the walls in my room, but even the smallest spaces can look modern and stylish, if all other elements are chosen to enhance the contrast and the dark walls. Some of you are going to see the inside is a piece of furniture in bright colors and decorations that mitigate the effects of black walls, others will benefit from natural light, some are painted on wood or walls, wallpaper, and applications – but all ideas have two things in common: the courage and well-designed structures.

BLACK WALL INTERIORS DESIGN OFFFICE FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN OFFFICE FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN DINNING ROOM FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN DINNING ROOM FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN BEDROOM FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN BEDROOM FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN KITCHEN FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN KITCHEN FOR A MODERN HOME

Paperless Mission #10: Distributing Student Assignments

This is the tenth installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

 

Mission #10: Distribute Student Assignments through Shared Folders

Once my students had their iPads, I needed to figure out a way to get their work out to them. At first I tried using Edmodo, but that proved to be a bit glitchy for assignments where I wanted students to work with the materials in a different app like GoodReader. I needed to figure out an easy to manage workaround. Welcome back, Dropbox!
To do this, I created a new folder on Dropbox called “Student Assignments.” I then right-clicked on the folder to pull up the option to “share link.”
This pulls up a new window that shows the internal content of the folder in the background. Here, you could enter in a bunch of email addresses, but I prefer to click on “Get link.” This copies a link to your clipboard for you to paste somewhere else.
Once I had the link to the folder, I put it in a highly visible spot on my class website. My students use my class website constantly, so getting to the link was easy for them once they knew where to find it. 
Once the folder was shared, I started to create the internal contents of the folder. I created 6 folders inside — one for each day of the week and an archive folder. 
I numbered the days of the week to control the order of the files. Dropbox will alphabetize the folders otherwise.
As I gather resources or assignments that I want students to access, I save them as pdf files and I just put them in the folder to match the day that I expect them to do the assignment. At the end of the week, I move everything into the Archive folder, and I start over creating the assignments for next week. 
This system has worked incredibly well for me! Here’s why:
  • Items in Dropbox sync immediately, so if we’re in the middle of working on something and I realize that I’ve forgotten to give students something that would be helpful, I can just drag it into the folder. I don’t have to sprint down to the copier. 
  • It’s the ultimate organizer for absent students. If a kid misses class on Tuesday, they (and their parents) know to go to the Tuesday folder to see what assignments are there. There’s no more worrying about lost papers or assignments.
  • The archive folder provides a great back-up for lost work. If a parent can’t find a reading or a study guide to help before a test, there’s an easy place to go to see all of the work.
  • It only requires a one-time set-up. Since I’m sharing the external folder and not the individual folders or assignments, I can change out what’s inside the folder without having to get a new link to share. 
  • It doesn’t require any log-ins or sign-ups from my students. They don’t have email yet, and they don’t have Dropbox accounts of their own, but that doesn’t matter. Accessing shared files on Dropbox doesn’t require a log-in of any sort. 

I’ve been incredibly happy with this system. Everything that I would have copied in the past has been easily distributed through my shared folder in Dropbox. 

What are some other ways you could use shared folders in Dropbox? I’d love to hear your ideas in the comments.

Fads Pose Dangers, Don’t Listen to Dietary Fads

However, we need to be careful on this question of diet. Many different ideas are prevalent today. Don’t believe all you hear. There may be some elements of truth in a few of these dietary fads, but usually there is some foolish notion hidden underneath that is neither in harmony with science nor with common sense. Don’t be misled.

Regardless of the many fantastic claims that you may hear, there is no one perfect food. There is none that will meet all the needs of the body any more than there is one perfect material that will serve every purpose in building a house. The best diets are those in which there is plenty of variety. Then if any particular element is lacking in one food, it may be amply provided in another. This is one excellent way of avoiding deficiencies in your diet.

Variety is most important. But it is not the complete answer. We must also use discretion in the choice of foods. Some things that may look tasty are not always healthful and nutritious. Foods that are highly refined are less likely to contain the vital elements to meet the needs of the body. Modern food processing may have its good points. But sometimes the vitamins and minerals are lost in the refining process. It is better to use fresh foods whenever they are available. But be sure that they are really fresh.

Diet Start

Some people tend to think that malnutrition is a problem among the less-favored classes of the world. While this is true, it is surprising how often those with higher incomes also suffer from a different type of malnutrition. They eat plenty of food, but mostly of the wrong type. This so-called “hidden hunger” is very common in large cities, where more artificial living conditions prevail. Modern methods of marketing are providing a wider range of foods. But far too many people still prefer to live on devitalized foods that are woefully inadequate. It is these devitalized foods that lead to hidden hunger.

Such diets fail to provide the body with the right building materials that will keep it functioning properly. Foods that contain a high concentration of sugar and other carbohydrates may provide energy, but other important elements are usually lacking. Soon the organs begin to lose their normal powers of operation. The vital processes of the body are slowed down, and a toxic condition develops. The delicate balance of nature is upset, and the whole body suffers.

It is amazing the amount of food that one person may consume in his lifetime. Someone has estimated that we eat up to 1,400 times our own weight in a lifetime of seventy years! Think of how much money we spend in buying all this food! Surely such an expenditure as this is worthy of our closest study. Are we buying health, or weakness and disease? A balanced diet is the very best type of insurance against those degenerative diseases so common today.

It is true that diet alone is not the answer to all of our health problems. Other things must also be considered. But a well-balanced diet will always help to restore those body tissues that have been laid waste by serious disease. And what fun we can have while we are getting well again! So much depends on the attitude of the mind.

Mental Attitudes Important

Centuries ago the wise man gave us a great scientific truth when he said, “A merry heart doeth good like a medicine.” This is absolutely true. It is the optimistic person who usually makes a good recovery. Because he is happy in himself and confident in the future, his health naturally begins to improve. His whole body responds to the sheer joy of living.

But the wise man did not stop there. He also added these significant words: “A broken spirit drieth the bones.” This observation is just as true as the other. A pessimistic attitude soon affects the whole body. It slows down the circulation of the blood. It interferes with good digestion. It takes all the joy out of living. In the end, it may so completely change the individual that he becomes old and worn out long before his time.

Our mental attitudes are very important, particularly as they affect this question of diet. Many of us are shortening our lives without fully realizing what we are doing. Some of us eat too much, often for no other reason than to soothe our injured feelings. Or perhaps we do not take time to eat sensible meals. We grab something and run. We are in too much of a hurry. Then we wonder why we are weak and sick. We do not seem to realize that our diet has much to do with our endurance and also with our ability to resist disease. All the vitamin pills in the world will not make up for the lack of a sensible way of living.

Millions of people are spending fortunes trying to win back their lost figures and restore their flagging energies. All they needed was to apply a little common sense in the first place. No one can hope to have an attractive appearance, a healthy skin, and a clear mind unless he is willing to use discretion in choosing his meals. Even good foods, if taken to excess, may destroy the vitality of the body. Anything that is overdone may cause trouble, even too many vitamins.

A balanced diet is the very foundation of good living. To keep the body functioning smoothly and efficiently, it must be supplied with a constant stream of essential nutrients. This must be clear to all. Yet, it is a shocking fact that many farmers and dairymen are more interested in how they feed their cattle than in how they feed their children! Of course, it pays to see that cattle are well fed. But isn’t it time we begin to think about ourselves and our children as well?

Today, thanks to modern medical discoveries, we have less to fear from serious infections. But degenerative diseases are becoming more frequent on every hand. How can these be avoided in your own particular case? This is something you should feel free to discuss with your own family doctor. He is the best one to advise you on such matters. But there is no question that a good, sensible diet will always help. And when we follow such a program, we will feel stronger and more energetic, our mealtimes will be happier, and we can look forward to enjoying better health for years.

My trip to Dhaka, Bangladesh, November & December 2010 & January 2011

January 2011

Back again at the Hotel De castle; it looks like I have spent more time here in the past 3 months than at home.

The original brief was to develop a Sustainability Plan for the organization. However, most managers confuse it with Resource Mobilization / Fund Raising Plans. Typically a Sustainability Plan involves a risk analysis of the organization comprising of Board, Executive Leadership, Resource Audits (Man, Money, Material & Technology / knowledge), HR, ICT, Finance and other support services systems audits plus a host of other environmental issues.

I cleared up this confusion and came to develop a Resource Mobilization Plan (Only Money); however, the team has not completed the budgets. So have to delay the process by a few days. Meanwhile I witnessed riots in Dhaka due to stock market crash yesterday. Stock price manipulation rings were very active in DSE over the past year and sent the stock prices way up beyond the wildest PE ratios possible for some companies. Just like what’s happening at the CSE in Sri Lanka. Most stocks trade much higher than PE ratio. Is this a prelude to what we can expect in the streets of Colombo I wonder?

Finally managed to develop the RM Plan for the organization; this is the end of the assignment for me and look forward to going back to Colombo.

December 2010

It’s good to be back in Dhaka and at the Hotel De Castle. Guess what its Harthal season again! I was in Bangladesh in 2006 and in 2008 for the then famous Harthal “Save Democracy” which was a success in overthrowing the elected government and appointing a caretaker government. However, during Harthal the general public and the visitors to Bangladesh suffers by having severe restrictions in free movement. I will spend 2 weeks in Dhaka for this assignment with the intention of developing the Vision, Mission, Values and Strategies of the organization.

It was hard work but managed to develop the Vision, Mission, Values and Strategies for the organization. During this process there was a one day Harthal, but it seems to have been a flop! What’s going on here, have the people finally realized not to go on Hartal for silly things? Well, we will just have to wait and see.

As part of the assignment I had to help the management team present the Vision, Mission, Values and Strategies to the board and get their comments and final approval. However there is an issue. The issue is that; the roles and responsibilities of governance and the executive branches of the organization are not clearly delineated to ensure efficient operations. In short there is a power struggle between the two. I have to manage this delicate process; otherwise all hell may break loose during the meeting and true to form, the consultant will be the fall guy.

You can read my article titled “Governance – Do we need to build capacity?” published in http://capacitydevelopment.ning.com/

The meeting with the board went off without any major hiccups and got the necessary approvals and consent for the next stage of the assignment.

November 2010

The assignment I undertook was to develop a new Vision, Mission, Values, Strategies and a corresponding Resource Mobilization plan and support services (Finance HR & IT) plans for Acid Survivors Foundation ASF http://www.acidsurvivors.org/ of Bangladesh. I will be staying at the Hotel De castle in Banani, Dhaka.

I must say that I was quite shocked at the number of people being attacked in Bangladesh and the physical and psychological damage it does to people. The major cause of attacks was economic (Dowry & Land). Given the poverty levels in Bangladesh I must say that I am not surprised. Having enough resources to go around for 160 + Million people is not a joke.

The irony is that at the United Nations (Put UN Web Site) review of the Millennium Development Goals (Put MDG review results Web Site) it was concluded that mot poor countries (including Bangladesh) were failing miserably in trying to reach the MGD’s. In my Humble opinion this is because most poor countries are not dealing with the white elephant in the room i.e. population growth. This is obviously considered a sensitive subject given the reluctance of politicians to take on the religious establishments head on be it Islam or the many denominations of Christianity. On the contrary this should be the main subject of discussion by far thinking politicians the world over.

For instance if Bangladesh were to implement strict policies to have ZERO growth in population for the next 10 years it would develop at a faster rate As even the slightest growth in the nations wealth will be held by a content population. This is common sense.

Most people misunderstand when we talk about zero population growth. They think that you are suggesting that people stop having children. In fact it does not mean that at all. It just means that your birth rate has to be equated to your death rate.

In the case of developing countries; the way that externally funded development sector project are implemented creates further frustrations within a given population and at times directly create political and social unrest. Most development sector professional (from the north countries as well as the south countries) don’t even understand this themselves. Consider the following. Most western donors advocate rights based projects. This means that all citizens will demand equal levels of services from the state irrespective of economic, social, political, ethnic or religious status. This in a developing country means that “now” 10,000 people line up for services as opposed to 1,000 people. The issue is that the rights based development project itself does not have any or enough funding to cater for the newly generated demand. The funds are only available to create and sustain the demand by the citizenry. So now the poor government has to serve a larger number of people with the same or slightly increased budget. This only means that in order to cater for the quantity the quality of services will be compromised. This is OK with the rich citizens as they can afford to pay for services by the private sector or bribe the state employees or use influence to get a better service from the state service provider.

One can argue and say that this is a deliberate attempt by some of the donors to create instability within developing countries. I am not a conspiracy theorist but I wouldn’t put it past some of them. The point is that we who hail from the developing countries must act a lot smarter than we currently do if we want to develop.

As for me the assignment will run in to the New Year and I will have to go to Bangladesh a few more times to finish the assignment.

Franchisee Profile: Marc Flame

Franchisee Profile: Marc Flame

Marc Flame is originally from the Bronx in New York, specifically Riverdale. Growing up, Marc spent every summer on Long Island at his grandmother’s beach house and loves the outdoors. After graduating from JFK Highschool, Marc’s parents moved to South America where Marc learned to speak basic Portuguese. After living in Brazil for a while, Marc moved back to New York where he attended New York University. He graduated in 1981 with a degree in Economics and International Business. Upon graduation, Marc spent much of his time on Wall Street starting his career Bankers Trust Company. Marc eventually became Chief Financial Officer at the banks Technology subsidiary. During Marcs’ tenure he established a successful record of improving operational efficiency and profitability. After fourteen years at BTCo, Marc left and joined Citigroup. Marc spent ten years within the Finance Organization of Citigroup. He then joined the CBS Corporation where he served as CFO of the CBS Technology organization.

After doing some traveling, Marc decided to relocate from Chicago to Atlanta where he began researching franchises to invest in. After much research Marc decided that Workout Anytime was where he wanted to be. Not even three weeks after watching the Workout Anytime franchise video, Marc signed for his first franchise. He now owns the first Workout Anytime located on the South side of Atlanta.
How did you learn about the brand? 
I was researching different franchises and was heavily focused on the fast-food industry when I came across Workout Anytime. I watched the franchise video and was immediately hooked. I knew right then that was what I wanted to invest in. Not even three weeks after seeing the video I met with Randy the entire senior WOAT team. It felt like a family and I signed with Workout Anytime after that meeting.
Why did you choose an opportunity with Workout Anytime? 
I’ve always wanted to own my own business. I worked at a Baskin Robbins in high school and it was some of the best times I’ve ever had. I have always enjoyed doing my own thing which is why I started looking into franchises. I chose Workout Anytime because I am very interested in the Workout Anytime model and I really wanted to do a franchise in a market that really needed it. 
Do you have any development/extension plans? Add units? Timeframe? 
I would like to eventually expand. I do not have a multi-unit sign at the moment, but the goal is to have 3-4 locations within 4-5 years. I am trying to open one every year and a half. Currently, I am working to be the most successful location rather than building out more units. When you talk about franchises people have glass ceiling expectations with what you can achieve with any one location. The Workout Anytime model allows me to push the boundaries, and ensure the opportunity for many members to enjoy all the advantages provided to Workout Anytime members.
Are you involved in any charities or involved in the community in any way? 
I am learning more about the Riverdale area each day and would love to work with charities and get involved with the community once I get to know it better.
Do you have any other interesting hobbies or passions?
I love spending time outdoors. Anything outdoors such as going to the horse stables with my daughter, 
watch my son dirt bike on the trails, and go to the beach as often as possible.

And More: Deals and Sales – End Of The Month Specials (February)

The transition from February to March this year isn’t seeing a ‘ton’ of games on special sales, but there are a few deals on almost every gaming/dealer website (some are only on for the weekend and some last until the middle of March, see each sale you are interested in for details):

Steam, Valve’s storefront has a Spotlight Sale of Sniper Elite: Nazi Zombie Army (1 & 2), which can be purchased together in bundles or 4-Packs to play with your friends and is their Weekend Deal:

Sniper Elite Nazi Zombie Army Sale Page
Sniper Elite Nazi Zombie Army 2 Sale Page

also on sale
Trine is on sale for only One Dollar (90% off), or get Trine 1&2 for $3.74
Warhammer 40K: Dawn of War II: Retribution is on sale for $7.59 (75% off)
Alternativa is on sale for only $1.29 (90% off)
The Sims 3 is on sale for $7.99 for those who haven’t played it yet (60% off)
Kung-Fu Strike: The Warriors Rise is on sale for only $1.99 (80% off)
Moto GP 13 is $12.00 (70% off)

Gamefly, the storefront that you can also subscribe to (that took over Direct2Drive in 2011) has a few sales going on, one featuring all 2K Games titles at 75% off:

(click image to see Full Size)

also on sale
Bioshock is $4.99 (75% off)
Bioshock 2 is $4.99 (75% off)
Bioshock Infinite is $9.99 (67% off)
Borderlands, Game Of The Year Edition is $7.49 (75% off)
Borderlands 2, Game Of The Year Edition is $19.99 (50% off)
Duke Nukem Forever is $4.99 (75% off)
Civilization V is $7.49 (75% off)

GamersGate, the storefront formerly part of Sweden’s Paradox Interactive has a bunch of sales going on as well:

(click image to see Full Size)

also on sale
Call of Juarez: Gunslinger is $9.72 (46% off)
with Battlefield 4 is out, Battlefield 3 is on sale for $4.99
Sniper Elite V2 is on sale for $7.50 (75% off) or get the
Sniper Elite V2 Collection (which includes: Sniper Elite V2, the Sniper Elite V2 Kill Hitler Pack, the Sniper Elite V2 The Neudorf Outpost Pack, the Sniper Elite V2 Original Game Soundtrack, and the Sniper Elite V2 The Landwehr Canal Pack DLC) all for $13.75 (75% off)
The Tropico Trilogy Bundle (which includes: Tropico, Tropico Paradise Island, Tropico 2 Pirate Cove, Tropico 3, Tropico 3 Absolute Power) all for just $4.99 (75% off)
and last but certainly not least
The Total War Master Collection bundle (which includes: Empire: Total War, The Medieval 2 Total War Collection (M2TW and the M2TW Kingdoms Expansion Pack), Napoleon: Total War™ Imperial Edition
Rome: Total War Gold Edition, Total War Battles: Shogun, Total War SHOGUN 2, the Total War Shogun 2 E-Guide, Total War Shogun 2 Fall of the Samurai, and Viking: Battle for Asgard) all for $25.00 (80% off, regular price $124.99!)

Once again, some of these are only on for the Weekend and some last until the middle of March, so check out the sale you are interested in for details. I hope you catch something you want – and See You In The Games!

In Defense of Classroom Technology

Usually when I talk to people about the fact that I teach in a 1:1 iPad classroom, they think that’s awesome. But now and again, I’ll run into someone who thinks handing a kid an iPad in school is an atrocity, and I feel like I have to defend the work that I’m passionate about. This happened to me recently at a social event when my attempts at small talk quickly turned into a debate about what we’re “doing to kids today.” The naysayers certainly exist, and this particular encounter made me pause to think about why I feel so strongly about this topic.

Here are some of the reasons I feel it’s in the best interests of both students and teachers to maximize the use of classroom technology.

My students explore constellations on their iPads.

1. It teaches real-world problem solving skills.
Being good at technology is largely a result of being willing to experiment and fail. I wasn’t born knowing everything there is to know about iPads or Evernote or Edmodo — I’ve learned by trying different things and seeing what worked and what didn’t. When I can’t figure it out on my own, I talk to others or look for the information I need online. Now I get to see these skills in my students. Whenever they need to troubleshoot something, they work together to find a solution. They don’t give up or think it’s impossible. In this high-tech world, these skills are going to be incredibly valuable.

2. It facilitates better communication between home and school.
If parents want to know what we’re doing in class each day, they can find all of our homework and activities on our class website. If they want to monitor grades or see what assignments are missing, they can look on Edmodo. If they want to know what their child’s behavior was like at school today, they can look on ClassDojo and get a report. If they want to know what their child sounded like reading a 4th grade leveled text at the beginning of the year compared to now at the end of the year, I can pull up the child’s audio recordings on Evernote. Technology makes it easier for parents to know what’s happening in school, and I’m happy about that.

3. It makes students better writers.
Without question, writing skills are incredibly important. When I think back on all of the essays I had to write in high school and college or the cover letters I wrote to get opportunities I have today, I know that my ability to write mattered. Technology makes students better writers for a variety of reasons:

  • It makes them more open to revising and publishing their work when they don’t have to handwrite the whole paper over again.
  • It teaches them typing skills that will make them more efficient at writing and therefore able to write more. 
  • It gives me more opportunities to give them feedback about their writing because I can easily collect samples at various points. I can have them turn in a copy of a draft wherever they’re at without interrupting their work because I don’t have to collect a notebook. 
4. It keeps kids engaged.
I used to have students write book reports. Now I have them write book blogs on KidBlog and make book trailers using iMovie. It’s basically the same assignment, but now students are motivated and engaged to complete it. They have an audience of their peers that makes their work more authentic, and it’s something that can’t be easily replicated without technology. The effort and outcomes my students experience because of technology is something that should be encouraged.

5. It benefits all types of learners.
I think a lot of the criticisms of technology assume that students are being passive consumers of it — watching videos or playing video games all of the time. Without question, technology could be used as a high-tech babysitter, but that’s not how it’s being used in my classroom at all. When my students use their iPads, they are active and interactive, and they’re expressing their creativity in so many ways now. They’re making movies, writing stories and articles, becoming budding photographers, and interacting with the world and each other in new and exciting ways.  They’re still collaborating and developing the interactive social skills necessary to be productive citizens of society.

6. It keeps everyone more organized.
I can’t begin to describe how many minutes I’ve lost over the last 6 years because students couldn’t find a paper or a notebook. Then once it was turned in, I’d have to shuffle through piles of nearly 30 to find what I was looking for. Add to that the fact that students work at different rates and finish tasks at different times, and you have the potential for an organizational nightmare.

I’m a pretty organized person, but without any hesitation I can say that technology has made my students and me substantially more organized. Everything we need can be found on an iPad or a computer. There isn’t instructional time lost finding materials or planning time lost figuring out where I filed that lesson idea or who is missing work. It’s all in one spot.

7. It allows me to give better feedback.
My students recently took a multiple choice test on Edmodo. I’d entered the correct answers before giving the test, so when I went to look at the results, it was already graded for me. Rather than spending time rifling through a pile of papers to mark answers right or wrong, I was able to type specific feedback to the students. For example, when several students missed question #6, I typed 2 sentences explaining the problem with the answer choice they selected and why the other choice was better. With the help of copy and paste, I was able to give that feedback to all applicable students in less than 5 minutes. How often do you think I could accomplish that in a world where I had to handwrite the comment 15+ times? It wouldn’t happen. I wish it could, but it’s not feasible.

8. It gives me more information so I can help students.
I routinely ask my students to solve math problems and explain their thinking. Sometimes they have to explain it in words and sentences, but other times I let them use their iPads to make short (30-60 second) videos narrating their solutions and the steps they took. Similarly, when I do reading assessments with students, I can use my iPad to record the student’s voice as the student reads. This creates an artifact that I can listen to, share with parents or RTI committees, and analyze in a way that wouldn’t be possible absent technology. It’s some of the best evidence of a student’s ability, and it helps me identify strengths and weaknesses so I can give students the support they need.

9. It makes me more efficient.
Anyone who’s a teacher can attest that this job sometimes borders on impossible. Teachers take on so many roles and have so many responsibilities that the stress can be overwhelming. I think that’s a major factor in why so many great teachers leave this profession within the first few years and why many capable individuals are deterred from entering the field. In my experience, technology has made this all more bearable. I don’t have to waste time shuffling through paper or hunting for files anymore. I don’t have to haul carts — literally carts — of student work and planning materials home anymore. I can find exactly what I need wherever I’m at because everything is electronic. It’s made me much more productive and efficient, and everyone benefits as a result.

10. It’s appropriate for the world we live in.
I know a lot of people lament the fact that we’ve moved into an age of technology. I’m not one of them, but even if I were, I recognize that there’s no going back now. I’d rather introduce students to technology in safe, structured ways where I can guide them through the perils and pitfalls than leave them to struggle on their own. I also like that I can show them how to make technology work effectively for them. I’m facilitating students to be productive, creative, and responsible users of technology, and I’m not confident they’d all get there on their own.

It’s not technology that’s an issue — it’s how the technology is being used. I’m certain that the ways my fourth graders use their iPads will make them better informed, more capable citizens down the road. Is it the only way to teach them? Absolutely not, but the advantages of using technology in the classroom far outweigh any disadvantages the devices bring.

What are the arguments for or against using technology in the classroom that you’ve heard? I’d love to hear your thoughts in the comments.

The Incredible Benefits of Grounding – Walking Barefoot on the Ground!

Anyone with small children knows they want to try to ditch their shoes every chance they get – but if you think about how you feel when you are barefoot you will probably realize that you  also feel better when you can walk around barefoot.  Researchers have begun to unravel why being barefoot directly on the ground can in fact be very good for your health!
Your immune system functions well when your body has an adequate supply of electrons, which are easily and naturally obtained by barefoot contact with the Earth.
Research has shown that electrons from the ground have measurable antioxidant effects that can protect your body from inflammation. For hundreds of thousands of years on the planet humans have been in direct contact with the ground without anything that would block the flow of electrons into our bodies.
However in modern time’s pavement, wood, rubber, plastics and many other forms of non-conductive material are between our feet and ground blocking the natural flow of electrons.
The surface of our planet has a negative electrical potential. So when we are in direct contact with it electrons flow to your bod through a process called “grounding”.   Grounding causes positive physiological effects that promote optimum health.
Specific researched benefits include improvements in blood viscosity, heart rate variability, inflammation, cortisol dynamics, sleep, autonomic nervous system (ANS) balance, and reduced effects of stress.
When you connect directly to the ground without any non-conducting material between you and the electron field of the planet there is an improvement in the balance of two sides of your autonomic nervous system:  the sympathetic and parasympathetic nervous systems.
How Shoes May be Impacting Your Health
Materials like metals are excellent conductors of electricity (aka electrons!). The human body is also conductive because it contains a large number of charged ions (called electrolytes) dissolved in water.
Other non-conductive materials, such as plastic and rubber, have very few free or mobile electrons. Traditionally shoes were made of leather, which is a good electrical conductor. However almost all modern shoes contain rubber and plastic which block the flow of electrons from the earth to your body.
The Health Benefits of Grounding
Your immune system body has evolved a method of destroying bacteria and viruses by generating reactive oxygen species (ROS) that are delivered by immune cells. However, these ROS can also cause extensive damage to healthy tissues. ROS are usually positively charged molecules that need to be neutralized immediately to prevent damage to the body after destroying bacteria or viruses.   This is one of the key functions of anti-oxidants which are most important in immune cells to protect them from the ROS they generate!
Anti-oxidants essentially provide a supply of negative charges. Food based antioxidants (such as Vitamins C and E) and anti-oxidants your body produces are critical but a regular supply of electrons grounding can supply them as well.
Evolution facilitated the process of grounding by providing conductive systems within your body that deliver electrons from your feet to all parts of your body. This system has been integral to human physiology for thousands of years. Negative electrons are always available, thanks to the Earth, to prevent the inflammatory process from damaging healthy tissues.
All of this was interrupted when we started to wear shoes with rubber and plastic soles, and no longer slept in direct contact with the ground. Several experiments have proven that a person who is grounded is less stressed and more relaxed.
So have some fun, kick your shoes off and get back to nature!
How to get the benefits of Grounding
Grounding is simple in warmer climates – simply spend time barefoot in direct contact with the earth.   Even better do this on a beach walking along the edge of the water because the flow of negatively charged electrons will be highest here because sea water is an ideal conductor of electrons!    Any amount of time will help but the more you can do it the better!  Even better spend some time laying on the beach or ground with your body in direct contact with the ground without any artificial fabrics, rubber or plastic between your skin and the ground.
For those of us who do not live in warm climates staying grounded during colder months is a bit more challenging but doable! There are actually grounding mats available that plug in to the grounding wire port of a normal 3-prong outlet or a grounding rod (US and Canada only). The earth’s natural electrons flow right up through the ground wire and onto the mat, even if you’re in a high rise. Most mats come with an outlet tester you plug in to the outlet so if your outlet is configured properly.

3 Favorite & Underappreciated Apps

I recently stumbled on an adorable blog called “Thirsty Firsties,” and Kelly, the author, is hosting a linky party about iPad apps.

The rules are to share three apps – one free for classroom use, one paid for classroom use and one favorite app for personal use. She’s also giving away an iTunes gift card as part of the linky, so be sure to check out her blog and join in the fun!

I’ve already shared many of the apps that I love and use in the classroom. See, for example, my list of favorite paid apps and my list of favorite free apps. So today, I’m branching out to share some of the apps that I’ve used and enjoyed this year that I haven’t really talked about before.

Favorite Free App – Spelling City

Vocabulary Spelling City is a great app for teaching students vocabulary or spelling words. It has a variety of engaging games, and it can be used by students at all levels. The app itself is free and has a lot of functionality on its own. If you are a premium subscriber to Spelling City, however, it’s a great complement to the activities you assign your students each week. I had my students doing activities on this app almost daily, and our differentiated weekly spelling tests were done entirely through this app (with the teacher premium subscription).

Favorite Paid App – Marble Math

Marble Math is a fun and challenging math game that addresses a broad range of math computation skills. I’ll confess that I’ve even found myself playing it far longer than a typical “teacher test-drive” would require. The object is to navigate a marble through a maze by solving a variety of problems. It includes fractions, decimals, equations, and negative numbers, so this is probably best for grades 4 and higher. Of all of the apps on our iPads this year, this was the one that students seemed to gravitate toward most in their free time.

Favorite Personal App – Feedly

In the debate between Feedly and BlogLovin, I’m coming down on the side of Feedly for one major reason — I LOVE the iPad app. It’s really easy to flip through and navigate, it rotates, and it doesn’t seem to crash as much as BlogLovin did. In fact, I’ve never had a single problem with it. I don’t tend to comment on blogs as much from my iPad, so I can’t speak to that aspect of comparing the two. Usually if I’m browsing blogs on my iPad, I’ll mark the blogs that I want to comment on and comment through my computer later on. So for the sheer visual appeal of the app for reading blogs, I’m a big fan. This has become one of my favorite go-to apps on my iPad.

Now it’s your turn. What are your three favorite apps? I’d love to hear about them, and be sure to link up with Kelly over at Thirsty Firsties if you get a chance. She’s running the contest for the iTunes gift card through Monday.

And don’t forget to link up with my Teacher Toolbox Trio celebration as well! I can’t wait to discover more awesome classroom resources from TpT!

How Much Protein Do You Need Each Day?

One of the most controversial and confusing aspects of nutrition is how much protein people should consume each day.    There are several factors to take into account to get a good answer to this question, and there are potential problems with eating too much protein.   There are also definitely problems with not eating enough protein.  It is also important to consider what type of protein is being consumed.
Height, weight, age, sex and activity level all factor into your protein needs.   Obviously the larger you are the more protein you need to take in to support structural proteins throughout the tissues of the body including the muscles, bone, skin and organs.  In the same way the more active you are the more protein you need to consume.  In addition, protein is used to create enzymes, and enzymes are critically important for all cellular function.
Protein is made up of amino acids and there are essential and non-essential amino acids.    Essential amino acids MUST be consumed because they cannot be made by the body.    Complete proteins contain all the amino acids and come from meats, poultry, fish, eggs and dairy.   While vegetarian proteins are not complete it is not hard to combine different plant protein sources to obtain all the protein the body needs to function.
Other factors which influence how much protein is required is overall caloric/energy status.     If you are eating enough calories to maintain bodyweight or gain bodyweight you require less protein as a percentage of overall calorie intake while those people in caloric deficit require a higher percentage of their overall calorie intake to maintain lean tissue mass (losing lean mass like muscle is usually NOT a good idea so this is important).
How much is too much?

In large amounts and for certain populations (such as those with compromised Kidney Function) excess protein can cause problems.    That being said, for the normal healthy individual, the body can easily and safely process and use a lot of protein.    A portion of the protein you eat is frequently converted to glucose (blood sugar) and if your overall calorie intake is too high you will convert excess protein into fat like ALL unused excess calories.
Another potential problem with too much protein is that high protein intake stimulates the release of mTOR which stands for Mammalian Target of Rapamycin.    mTOR is a key regulatory protein that signals for cell growth through the creation of new proteins. Consider protein building similar to a race car. The larger the engine, the greater potential for speed. Similarly, the more mTOR present in any given cell, the greater potential for more protein construction. And just like the gas pedal fuels the engine, mTOR is a signaling protein, and can be various levels of active (like a pedal’s ability to regulate speed). If a number of different processes all signal for ‘Go’, then the cell builds as much protein as it can, as quickly as it can. So just as a souped-up car takes off rapidly, a muscle cell can signal for tremendous muscle growth very quickly, given the right conditions.   n
For this reason, mTOR is a good thing when you are looking for muscle-building!  However, there is a potential dark-side to mTOR.   Cancerous tumors are designed to grow as fast as possible, and they rely on mTOR signaling to build proteins just like healthy cells.   So too much mTOR could theoretically put people at a higher risk of developing rapid and serious cancers.  In fact, a lot of cancer research is based around slowing down and minimizing mTOR activity in tumor cells (the exact opposite goal of muscle research).
 
This doesn’t necessarily mean that eating more protein for muscle building is going to cause cancer. Numerous other proteins and factors come into play, and some may respond differently in muscle cells than in cancerous cells.
Safe and Adequate Protein Intake

The Institute of Medicine’s protein RDAs are calculated using 0.8 grams of protein per kilogram of body weight. This means an adult who weighs 68 kilograms needs at least 54 grams of protein each day. The RDA for pregnant and nursing women is 71 grams of protein per day.  Keep in mind the RDA is a MINIMUM and does not mean this is ideal!   This also assumes you are sedentary!   So, if you are exercising and trying to build muscle or older and trying to prevent muscle loss higher protein intake is better.  To determine your minimum daily intake, divide your body weight by 2.2 to determine your weight in Kilograms and then multiply by .8 to get your minimum daily protein intake.  
The Academy of Nutrition and Dietetics states that although athletes only need about 1 gram of protein per kilogram of bodyweight to maintain muscle mass, they require 1.4 to 1.8 grams of protein per kilogram to build muscle mass; this is equivalent to about 0.64 to 0.82 grams of protein per pound of body weight each day.

Health Benefits of Red Pomegranate

HEALTH BENEFITS OF RED POMEGRANATE

Health Benefits of Red PomegranatePomegranate or pomegranate is a fruit with a red color that turns out to have a lot of nutrient content. Nutrients contained in the fruit is so much especially nutrition for protection of the skin. Some nutritionally beneficial is an antioxidant, anti-inflammatory, and anti-aging.
Health Benefits of Red Pomegranate - 1
Pomegranate Benefits for Beauty
In this modern era, the pomegranate has been processed into a variety of products, both health and beauty. So what are the benefits of the pomegranate to the beauty of your skin? Consider the following tips:

  • Caring for the Skin
Pomegranate turned out very rich in collagen. Collagen is the basic component of the skin that keep skin smooth and soft. Not only rich in collagen, the compounds in pomegranate also helps fibroplats cell growth. Fibroplats are cells that have the task to produce elastin and fibers that are useful to keep the skin to remain smooth and taut. Pomegranates can also stimulate the proliferation of keratinocytes. This process is a process of forming the outermost cells of the skin.

  • Helps Cell Regeneration
If you have freckles or skin rash on the face, it could be signs if your skin starts to break down. If your skin is already starting to show signs of such, better immediately consumes pomegranate. This is because the pomegranate can provide benefits to protect your skin layer and help regenerate the skin in the inner layers of your skin. The content of antioxidants in pomegranates can also help your skin ward off free radicals caused by pollution.

  • Prevent Premature Aging
You want to look to look like a young impressed? It helps you consume pomegranates. This fruit turned out to contain a compound that works to prevent premature aging. You can consume it in juice form or in the form of oil. But you are advised to use oil only because it proved more effective. You can apply pomegranate oil to your entire body after bathing. By applying it regularly, your skin will become firmer and younger looking.

  • Treating Acne
Pomegranates are rich in vitamin C. Vitamin is that it has a function to regulate oil production in the face. To treat acne using pomegranate quite easy. The first pomegranate puree until smooth. Then apply on face masks to be like. Let it dry and then rinse with cold water. By applying to your face with acne, this pomegranate will shrink acne once existing acne scars on your skin. So, want to be free of acne? Use this pomegranate fruit mask on a regular basis.
Health Benefits of Red Pomegranate - 2
  • Moisturize The Skin
Do you have dry skin? If so, you can use pomegranate to moisturize. Pomegranates have very little meat structure. Size is what can cause pomegranate can go into the deepest part of your skin. By logging into your skin, pomegranate will work to moisturize your skin. Not only moisturize the skin only, pomegranate is also able to cope with the irritation of the skin. This is because the pomegranate contains omega 5, which serves to keep your skin moist.

  • Treating Skin Irritation And Skin Burns
Pomegranate it also can be used as an ointment to treat your skin is injured. This is because the pomegranate contains compounds called polyphenols. Besides polyphenols, pomegranates also contain another substance called anti-inflammatory substances. Both of these substances which can be used to treat your skin is exposed to irritation or burns.
How to make it too easy, you can refine pomegranate and afterwards paste it on your skin is injured. Let dry and rinse with cold water slowly so as not to cause pain. Do this treatment until your wounds heal properly. In order to maximize results, you are also advised to drink fruit juice to the wound on your skin really recovered.
Pomegranates for Health Benefits
The benefits of pomegranates not only for beauty, but also for health. Pomegranate is commonly used to treat deficient blood aka anemia. In addition, the fruit is also very well taken by pregnant women.

  • Addressing and Preventing Cancer
Within this pomegranate fruit contains a substance called flavenoids. Flavenoids substance is a kind of high antioxidant substances that are useful to prevent cancer in your body. If someone contracting cancer, it is better to consume the fruit of this one because the fruit is proven to be able to fight cancer cells growing. Some types of cancer that can be treated with pomegranate juice, among others, breast cancer and prostate cancer.

  • Overcoming Anemia
Not only vitamin that is useful to you only beautify. Pomegranate also contains iron. Iron content in pomegranates fact can treat you who have anemia. For those who have anemia, you can create and drank pomegranate juice regularly. Not only serves to treat your anemia alone. Pomegranate was also able to prevent anemia early.

  • Other Benefits of Pomegranate
In addition to the above benefits, there are other benefits of pomegranate, especially for women who are pregnant. If you are pregnant, it is good to consume pomegranate. Facts indicate if the pomegranate can reduce the chances of having a baby born prematurely. In addition to consuming pomegranate baby weight will make you become more standardized. For those of you who are old, pomegranate also has properties that are very good if you consume regularly. This is due to the arrival of pomegranate can prevent Alzheimer’s disease.
There are so many benefits of pomegranate is right, Ranging from health to beauty problems can be overcome with pomegranates. Hopefully Articles Health Benefits of Red Pomegranate that we share today can be beneficial for you. Thank You.

Trip to Hyderabad Cont….

Well there are scheduling issues so will go to get my ticket & visa on thursday. Everything else is back on schedule. Trying to contact some of my friends who are in India so that we may be able to meet over there.

I have been doing this job since 2002 and travelling overseas since then; however this trip will be my first time on a budget airline. Dont know what to expect? When I got my online booking it said Meal – To be purchased. some how flying and buying your food did not sound OK to me. I am sure that what ever my first choice is it will be over by the time the airline staff get to me.

Anyway need to finish up all the stuff for today to be able to watch the opening match between Sri Lanka & South frica (ICC Trophy)

Battlefield 1 – DirectX Error “GetDeviceRemovedReason” [Workaround]

At first, because of the phrasing of the error, I thought it might be Hardware, namely my GPU (Graphics Processing Unit, the Videocard); but since that was working fine with literally, all other games – playing in longer gaming sessions even [and I know for sure that I wasn’t actually physically pulling out my videocard while playing …I think] – I omitted that possibility (for now) and focused on a potential Software approach, which meant checking configuration…

Looking at the Settings for the game then, I tried reducing everything down to the Lowest Possible Settings; to reduce the load on the GPU and the load in the processing of the game itself. (With lowered settings, there would be less data being streamed from the game, less being extracted from the compressed/encrypted files of the game, less being calculated and drawn, less everything). If there was a problem with how game data was being handled, this might being it to light [note: an issue with integrity of the files would not be detected this way, this is more of a data handling troubleshooting step; integrity of the game files can usually be checked/verified with a Repair/Verify through the game client or if that doesn’t help, a Reinstall of the game usually assures accurate game files (barring Drive/RAM file handling (Hardware) issues – which is another tangent/issue altogether, heh) – screenshot of where to run a Repair/Verify of the game files for BF1, below].

Example of the Location of where to Repair the game files in the Origin Game Client, showing Battlefield 1 in 2017
(Click to see Full Size)

Nope. Crash. Error [which I lost the clean Screenshot of, of course – but a version of it is in the Header for this posting – I will add a clear Screenshot of the error window to this post when I can capture it again, if it occurs]. Hmmm…. Since it was a DirectX error (and I am 93.33-repeating-percent-sure that I did not “remove the video card” while playing..), I tried one last thing. Instead of swapping out the GPU to try with something else (a GPU from a friend’s PC, for example), which is approaching a Hardware type issue; I tried something else: I changed the DirectX level in the game from DirectX 12 to DirectX11 [this may not have been solely ‘my idea’ – although I am sure I would have eventually arrived at it as a troubleshooting step, I looked up this error and found many, many locations and sources of others stating they have this issue and encountered this error and I may have read it somewhere, for it to have come up – merely mentioning because I just don’t want to take sole credit for something I may not have come up with entirely by myself…].

Example of where to ‘Disable DirectX 12’ and ‘Enable DirectX 11’ in the Video Settings, in Battlefield 1
[Hmm, this is more of a Workaround than a ‘Fix’ for this issue…]
(Click to see Full Size)

Success! I played a good couple of hours this way, with no crashing, closing, freezing, or errors at all – great! After trying it after re-opening the game, rebooting and playing some more, testing it the next day or two after as well, it seemed ‘solidified’; changing the DirectX level/version from 12 to 11 seemed to ‘solve’ the issue [for me, for now].

I think this is more of a ‘Workaround’ than a ‘Fix’, since it doesn’t solve the issue permanently… there is still something in the game engine or how it communicates with DirectX/Windows/theGPU, which is causing something that is not ‘fixed’ by this step; but, since it does work to get past the issue, I thought I would share, to help others that may be running into this seemingly-popular problem (‘popular’ judging from the queries I found about this issue on both the Battlelog forum and EA Support Forums, spanning a few years now..). I hope this works for you, dear reader, as it seems to have done, for me.

[Since this is not a true ‘fix’ (I do not know if this is permanent nor do I know the actual source/nature of the issue, therefore I cannot say this is a ‘fix’, imo); I will post this with the title “workaround”…]

Addendum:

Other helpful tips/steps that can possibly help, if the above step does not work (and some additional information), can be found in multiple places on the Battlefield and EA forums, such as this list by a helpful poster named STEEiL:
https://forums.battlefield.com/en-us/discussion/54605/directx-function-error-amd-getdeviceremovedreason-error-in-battlefield-1

Good Luck – I hope it gets working for you soon – and See You In The Game!

Solving the Weight Loss Puzzle Part 1

Have you tried to lose weight and failed? If so, you are not alone. 95% of the people who try to lose weight fail to reach their goal, and even less are actually able to maintain their weight loss once they achieve their goal. Obesity and the associated disease diabetes are increasing exponentially in the America despite the many published health warnings about the health risks associated with being overweight.
Why are people unable to lose weight? People are hopelessly confused about the factors controlling bodyweight regulation. This is not surprising when you understand that every single program, book, and guideline developed by various diet “experts”, including our own government, lacks crucial information, contains misinformation, or contains myths. The list of experts and programs seems endless: Dr. Atkins, Dr. Andrew Weil, The Pritikin Diet, Sugar Busters, Protein Power, Dr. Dean Ornish, the Paleo Diet, the Ketogenic Diet, and all the rest. To make matters worse much of the “information” from different experts seems to be completely contradictory.
Take this short True/False quiz to see how much you really understand about controlling your weight and bodyfat levels.
Eating a low fat diet is the key to losing weight
Eating a low carbohydrate diet is the key to losing weight
Most obese people have a slow metabolism
Obesity is a genetic disorder
Some people have a slow metabolism and some people have a fast metabolism
Exercise is not really effective for weight loss
You can eat all you want and lose weight if you do not eat carbohydrates
Low carbohydrate diets are unhealthy
If you eat foods in the right combinations you will lose weight
The key to weight loss is eating healthy not counting calories
Americans are eating more fat than ever before
Americans are eating less fat than ever before

Sound familiar? It should. All these statements have been made by various “experts”. Unfortunately, all but the last one is FALSE. If you want to control bodyweight you have to understand ALL the factors that govern bodyweight regulation and how they apply specifically to you. Stay tuned for part 2 of this article to learn more!

My Trip to Batticaloa cont….

My trip to Batticaloa was one year in the making. In March and April of 2010 I was requested to do an Organization Capacity Assessment of a project which ran across 4 districts and to come up with scenarios for independent / sustainable operation. The Scenario that was selected was to restructure the project in to a single operating office in Batticaloa and to have a satellite operation in Trincomalee. It took nearly one year for the project to be restructured and to get a not for profit limited company registered. This is a rare occasion when the funders of the project seeing that the need is still there and that the services delivered through the project are still relevant wanting to develop a sustainable organization to continue to serve the public / target group. My experience in the past has been that most funders / donors say that they want sustainability but don’t put enough money and effort. “Hats off” to the funders of this project; they seem to have got it right.

This trip was to develop a 3 year Strategic Plan for the newly formed not for profit limited company. On my way to Batticaloa I took the routr through Habarana as the A 5 and the A 26 was under repair. On the way I encountered a wild elephant on the main road at around 2 PM. (See my earlier post for a photo of the Elephant) It is rare to see the elephants on the road during the day. However during the night I have come across them more frequently.

The assignment went as planned and now I have to develop the documentation (Strategic Plan and the Process Document). On my way back I took the A 5 and the A26. The authorities are developing these roads really well. These roads will be fantastic to drive on once completed. It is a scenic route.

The view from the A 26 Road

WORKOUT ANYTIME in the Jacksonville Daily Record

WORKOUT ANYTIME in the Jacksonville Daily Record

WORKOUT ANYTIME was recently featured in the Jacksonville Daily Record. The article talks about the new WORKOUT ANYTIME that opened up Monday, October 6. The article talks about how the Levitt family looks to open 15 WORKOUT ANYTIME locations in the next 5 years in the Jacksonville area. 
View the full article here. 

WORKOUT ANYTIME in the Daily News

WORKOUT ANYTIME in the Daily News

Dale Chaffin of WORKOUT ANYTIME Bowling Green was recently featured in the Daily News. Dale was interviewed for the story and a photographer was assigned to take his photo for a story about the WORKOUT ANYTIME location in Bowling Green where he is the GM and how he has lost 80 pounds since 2012 with help of personal trainer Chris Talley. The story focused on how working at a gym has helped Dale with his fitness goals. 
View the full article here. 

Quick Tip: Heroes Of The Storm 2.0 – Where To Choose Skins, Mounts, Announcers And More [Interface Change]

Yesterday, Heroes Of The Storm “Version 2.0” came out – and along with it a bunch of changes and additions, breathing some new air into Blizzard’s MOBA entry. I have been having fun playing it off and on, discovering the changes and new progression system. I am working on a First Impressions/Overview of ‘2.0’ – but before that, I wanted to quickly make a Tip about something I am seeing a lot in the General Chat in HOTS: people asking how to change the Announcers, Mounts, Skins and other new additions, as the new UI has changed things a bit…

In 2.0, right away you will see that things have changed, as the Main Menus themselves have moved around and information is in different places. For example, the Shop link/text at the top of the screen is gone:

Here is where the Skins, Mounts, Announcers, etc can be located now:

The Loadout button (first one on the bottom, far left) has combined the “Heroes” and “Mounts” buttons and now holds all of the settings for the currently selected Hero. Here, you can choose the Skin, Mount, Announcer used and other new additions via the sections within the Loadout (you can even save Presets of combinations you like). 

Here is a 60-second tutorial showing where it all is, in Heroes Of The Storm 2.0:




That’s it for this Quick Tip – it was just something fast because I have seen it asked a lot in the General Chat lobby lately – have fun in Heroes 2.0!


Food Repair Guide: Baking Part 3

Marzipan

It pays to make your own marzipan as the real thing tastes so much better than bought. Since it is only a question of beating together ground almonds, sugar and egg white to moisten, there is nothing to go wrong.

Biscuits

Biscuits are simple to make and homemade biscuits always impress guests.

They have four dangers: being too soft so that they spread into shapeless plops; being too short or having too great a proportion of fat which makes them hopelessly crumbly; being overhandled, like pastry, which makes them tough; and getting overcooked, which they will do at the drop of a hat.

Diet Start

Texture

Since most biscuit mixtures contain butter, they will always become softer when they go in the oven, so, if your mixture is very runny when cold, it will run away altogether once it gets hot. Unless the mixture is being cooked in a restraining tin try to ensure a reasonably firm texture. Apart from anything else, if it is too runny the biscuit will tend to be tough.

Crumbling

If you want to use a very short mixture, mould the dough by hand rather than trying to roll it out, as you will not succeed. Cut the biscuits into fat rather than thin shapes so they have more chance of holding together.

Toughness

Do not handle the biscuits more than necessary to get the ingredients well mixed.

Overcooking

Once the biscuits have gone in the oven, watch them like a hawk. Take one out and cool it to test, as a biscuit, especially a dark coloured one such as chocolate or ginger, will often be cooked long before it looks cooked.

Failures

Biscuits that have fallen apart, spread or generally failed to live up to expectations, can always be broken up and used as decorations, or crumbled and used as biscuit bases (held together with butter or egg white) for dishes such as cheesecakes.

Tempura Mazel

Tempura is a Japanese dish. Tidbits are dipped in a batter of flour, water, and egg yolk, sizzled to golden in hot fat (by all means, use your wok for this if you have one), drained, and artistically arranged and served, usually on a doily-lined flat basket. The consistency of the batter (which must be neither too thick nor too thin) and the temperature of the oil (350° is just right) are of the utmost importance. Tempura cannot wait; it must go directly from wok to table.

Diet Start

  • 5 asparagus, cut into 2 or 3
    long diagonal pieces
  • 1-2 large carrots, sliced 1/4″ thick on diagonal
  • 10 green beans, ends trimmed
  • 2 small zucchini, cut into thick sticks
  • 1 bell pepper, cut into strips, pith and seeds removed
  • 6 shitake mushrooms, soaked in warm water
  • 6 large parsley sprigs, stems removed, dried
  • 4 Nori seaweed, cut into quarters (available in Japanese markets)

Clean and cut vegetables; make certain they are dry.

Batter:

  • Ice water
  • 21/4 cups flour
  • 3 egg yolks
  • 11/2 quarts safflower oil (more if using sauté pan)

Gradually add ice water to flour with a whisk till mixture is the consistency of heavy cream. Beat yolks and whisk into mixture.

Heat oil to 350° in wok or large sauté pan. Dip vegetables into batter and fry till golden (1-2 minutes). Do not crowd pan. Drain.

Chilis Mazel

  • 6 fresh green chilis
  • 1 recipe Mazel Cheese Mexican, warmed
  • Ice water
  • 3/4 cup flour
  • 1 egg yolk
  • Safflower oil to deep fry (about 11/2 qts.)
  • 1 recipe of cooked Salsa Mazel

Slit chilis lengthwise, just long enough to stuff with Mazel Cheese Mexican. Clean out seeds, etc. Stuff with Mazel Cheese mixture and set aside.

Gently whisk enough ice water into flour to make it about the consistency of heavy cream. Beat yolk with a fork, then whisk into batter.

Heat oil to 350°. Dip each chili into batter. Cook in oil till golden (1-2 minutes)

Drain on paper towels.

Served cooked salsa over chilis.

YIELD: 2 servings.

The timing on deep frying is difficult to pinpoint. Variables include size of pan, the amount of oil used, temperature of oil, desired color of finished product, etc. Do not crowd pan.

5 Tips to Make Your Paperless Classroom Work

I’m now more than 3/4 of the way through my year of 1:1 iPad work with fourth graders, and while I hoped to have a paperless classroom, the reality has been a bit different. We’re definitely using less paper than we would without iPads, but I can’t pretend that we’re paper-free. As I reflect on this school year, here are five things I would do differently next year to make the paperless transition go even better.

1. Begin the year with a typing boot camp.
The biggest obstacle to the paperless classroom at the beginning of fourth grade is simply that the kids (for the most part) don’t know how to type. Tasks that should have been quick ended up taking 3-4 times the length that I’d anticipated just because the kids were hunting for keys on the keyboard. I think if I’d spent the first term of the year working on typing skills, it would have made a big difference. And on a related note, I’d encourage students to get bluetooth keyboards to use with their iPads (assuming the school won’t invest in those, too).

2. Transition gradually.
When my students start fourth grade, they come from a school that does not have 1:1 iPads. As a result, the technology integration is a big adjustment–for both students and parents. Going fully paperless can be a huge culture shock for the students, and the transition can produce some anxiety. Even with tech-savvy students, there can be a huge learning curve with different apps, and it can quickly get frustrating for some kids–especially the ones who were very comfortable with school as they previously knew it. Start small with a few key apps (e.g., Edmodo, Evernote) and build from there.

3. Try to give options.
Some students are far more comfortable with the iPads than others, and sometimes their lack of comfort can impact their work. With writing, for example, I’ve learned to give students the option of drafting on paper, even though there are lots of mind-mapping and word processing apps they could use for drafting. Usually once they have that first draft on paper, they’re more comfortable typing it in to make revisions and edits. For some of my students, that flexibility makes a huge difference in the amount of writing they can endure. For other students, the iPads boost productivity. Either way, we know that choice is important to students, and this is another important way to differentiate in a 1:1 classroom.

4. Don’t force it.
There are still some contexts where it makes more sense to use paper. Math tests are one example for me. I don’t tend to give students multiple choice tests in math, and I want them to have plenty of space to show their work. Yes, they could do the work on GoodReader with a stylus and turn it in on Edmodo, but that’s not necessarily more efficient for me to grade–especially on a multipage test. Similarly, we’re still using paper and a notebook for our word study work. We use differentiated spelling lists with Words Their Way, and I want students to go through the practice of sorting and recording their words each week. Paper makes sense for that.

5. Stay flexible, and have a backup plan.
At the beginning of the year, we were using our iPads for almost everything (we still are). But then I got sick, and I had to write sub plans. I never know who I’m going to have as a sub, but there are two things that are certain: 1) the sub will never be as comfortable managing a class full of iPads as I am, and 2) students will be more apt to misbehave when they have a sub. As a result, I don’t usually include the iPads in my sub plans unless I know that there will be someone there to enforce my expectations (e.g., someone I co-teach with or my student teacher). If students expect to use the iPads for everything, it can really throw a wrench into the system to take those away, even for a day. Therefore, it’s important to be flexible with using them throughout the year so that students aren’t dependent on them. Sure, they might have a preference, but they need to be able to function without them. That’s also true for times when the power goes out, the internet goes down, or a software glitch makes the iPad temporarily unavailable.

Any tips to add? I’d love to hear your thoughts in the comments section.

This post contains affiliate links, but I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CRF, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

DYNAMIC DESIGN HOME CINEMA

DYNAMIC DESIGN HOME CINEMA

For furniture, I love the few pieces I have and does not change, but as a blogger we discover daily news, it’s hard not to crack …

Above the living-dining room where Jo Yana chose to paint the main wall in pink – small nod to her favorite designer Karim Rashid … You’ll also notice the suspension ATOMIUM in Kundalini the most beautiful effect!

This room also houses the home theater installation conducted by Dynamic Home Cinema. In front of these gorgeous wooden drops are pregnant Y21.2 Audio Linear …

At the entrance, a picture of Miles Aldridge sets the tone of the apartment, and FIDELIO Philips broadcasts Playlist place … On the side of the dining room, chairs LOUIS GHOST EROS and greet guests.

The main hall lit by the luminaire BLOB M Karim Rashid …

The cuisine is inspired by Parisian apartment signed Périchon we mention above, because the walls and ceiling were painted in gray have to emphasize the white lacquered furniture. Yellow light under the bar and a nice bin Brabantia bring the strand of color …

We love the headboard PARROT signed by photographer Solve Sundsbo …

The workspace of blogger … A reading area with ottoman LEBLON DELIENNE-QUAD and library. An office signed K-DESIGN, and the now famous chair VERTEX signed Karim Rashid.

DYNAMIC DESIGN HOME CINEMA

DYNAMIC DESIGN HOME CINEMA

Choosing a Sensible Diet, Healthy Appetite

So you like to eat! That’s normal. A healthy appetite is one of the greatest assets in life. The whole body seems to respond to the sight, smell, and taste of a well-prepared meal. Every organ responds to the occasion. The glands work more vigorously, the digestive organs operate more efficiently, and the nervous tensions relax. That is why eating is such a pleasure, especially when you are healthy.

Many people, however, are neither sick nor well. They are somewhere in between. They drag themselves around, feeling half dead much of the time. Yet, they are not sick enough to go to bed. What is the cause of their trouble? Many times it is due to a faulty diet. Some victims of nervous conditions could be completely cured if they would only learn to eat properly. The same is true of many others who suffer from digestive complaints. They could all find relief from their miseries by choosing better meals.

So much depends on the right choice of food. This human body in which we live is a superb machine. It is capable of operating smoothly for seventy or eighty years, provided that we treat it well. But if we fail to supply it with the materials it needs, the results may be well-nigh disastrous.

Every time we open our mouths to eat we make an important decision concerning our future.

Good health always begins in the garden. A well-balanced diet naturally includes plenty of wholesome fruits and vegetables.

Diet Start

What we choose to eat will either help to keep us strong and healthy or it will leave us weakened and less prepared to meet the stress and strain of living. The kind of health and the length of life we enjoy probably depend more on the type and quality of foods we choose than on any other factor. The choice is up to us.

It was the Creator’s plan that the foods we eat should keep us young and healthy. Many bring on premature old age by wrong eating habits.

Unfortunately, a great many people never give much thought to their diet. They will eat anything they can get their hands on or that may appeal to their perverted appetites. In their minds one thing is as good as another—or as bad. They will eat at any odd time whether they are hungry or not. No wonder they are sick! The human digestive system was never intended to sustain this kind of abuse.

Don’t Be a Faddist

On the other hand, there are some who react quite differently. They take great pains regarding what they eat. They are so careful to avoid anything that they suspect might cause them trouble. They are so particular in everything they do. Every now and then they go on some newfangled diet in the hope of winning back their lost energies. This means that they often deprive themselves of the very things they so much need. Such people are slowly starving themselves in the midst of plenty.

In most cases there was nothing radically wrong with such people. They simply didn’t know how to feed themselves in a proper manner. They were not intelligent on some of these most vital issues of life.

It should seem perfectly obvious to everyone that our bodies are built up entirely from the things we eat. We have no other way of getting these important substances into the system. Yet how few of us really think very much about this. To keep well we must develop different tastes. Our appetites need to be educated. For instance, we must realize that we cannot continue to eat devitalized foods without paying for our folly.

Foods that are highly flavored with sugar and condiments are usually devoid of some of the most important elements needed by the body. The seasonings often cover up the natural flavor to satisfy an abnormal appetite. But such foods may be completely lacking in the vital elements necessary to maintain a person in good health.

Rules for Choosing a Sensible Diet

Choosing a sensible diet is not so difficult. There are a few simple rules that anyone can follow. First of all, it is important to have plenty of variety in your diet. Don’t be satisfied with the same old humdrum meals. Look around for something new and different—avoid monotony. Find new ways of preparing food. It is a fact that the more variety you have, the less you are likely to suffer from some dietary deficiency.

The second rule is to learn something about the different materials your body needs. For instance, if you are going to build a house, you will have to buy certain supplies, such as timber, glass, bricks, plaster, nails, paint, and many more. In the same way the human body needs different building materials for the important job it has to do. These things are essential at every age of life, but more particularly during those rapidly growing years of childhood and youth. They are also necessary when one is recovering from some serious illness or injury, or during pregnancy and lactation.

What are these different materials? Doctors refer to them as proteins, fats, carbohydrates, amino acids, vitamins, minerals, and water. These are the materials of which the body is composed. They are present in our foods. When these various substances are absorbed into the blood stream, they are usually stored in the liver and other organs until they are needed. With the exception of water, each must undergo certain changes before being used in the human system. Myriads of chemical reactions are taking place within your own body at this very minute. This is what keeps you healthy and strong, so that all your organs will be working at full capacity.

From our foods we get the materials out of which the bones, muscles, nerves, skin, and all the internal organs are formed. From our food we also derive the energy we need in carrying on all the activities of life. In addition, we must have other important chemicals that are needed to regulate the activities of every organ in the body. Unless these materials are present in our daily diet, we are likely to suffer from some deficiency. Sooner or later we will find ourselves in real trouble.

The average diet of many families today is lacking in certain of these nutrients. Sometimes the trouble is due to insufficient protein. At other times it may be a loss of vitamins or minerals, which may have occurred during the preparation of the food. Some people try to make up for a deficient diet by taking extra vitamins in the form of pills. These may help, but they will never take the place of good food in supplying the needs of the body. There is always danger in trying to follow some haphazard, unbalanced diet. Only a sensible way of living will enable us to enjoy a full and satisfying life, free from diseases that could have been avoided.

How to Organize your Summer Reading

Summer is the perfect time for me to make some progress on the massive stack of books that I accumulate throughout the year. You know that stack — and if you’re like me, that stack may have spawned offspring and multiplied into several stacks around the house. And given the number of summer book studies I keep reading about, I know the stack will continue to grow. Like last week, when I saw that Misty was going to read Number Talks, and I had to get the book.

Or this morning, when I read that Beth at Thinking of Teaching and Brenda at Primary Inspired are hosting a summer book study of Building Mathematical Comprehension: Using Literacy Strategies to Make Meaning by Laney Simmons. I want to read that, too!

With all that I’m currently reading, want to read, and have finished reading, I needed a way to keep track of all these awesome books. Then I remembered GoodReads (this is very distinct from the GoodReader app that I’ve blogged about before).

GoodReads is a social media site focused on reading. I first started using it in 2010 after I finished reading The Book Whisperer by Donalyn Miller (if you haven’t read this book, it is a must-read).

She referenced the site in the book, and I used it through my computer for quite a while. Eventually, as I got busier, I started using it less. I recently got an email update about a friend who was using it, however, and it reminded me that I should revisit the site. My how GoodReads has improved since I used it last! First, GoodReads has mobile apps now to help you keep your reading interests up-to-date.

Now, I’m not such a bibliophile that I need to give status updates of what I’m reading non-stop. But these mobile apps have a fabulous feature that I love: a scanner. (Here’s the view of the app from my iPad. The iPhone version is very similar.)

The scanner allows you to scan the barcode on books and then add it to a virtual shelf. Your GoodReads account has 3 default shelves: read, currently reading, and to-read. Shelves are like tags, and you can create your own shelves based on topics or any other organization you’d like. Books can also be housed on multiple shelves at once.

I love using the scan feature to quickly organize the books that I’m reading or plan to read. Given the iPhone app, it’s also a dangerous helpful feature when I go to bookstores and see books that I’d like to read someday. I just scan them in, and it pulls all sorts of data for me about reviews of the book, average rating of the book, page count, etc. For eBooks I’ve purchased that don’t have a scannable barcode, I can also search by title or author.

In addition to using this to manage my summer reading, I expect to use this app more in my classroom library to inventory my collection, identify books that I’ve read or want to read, write recommendations for my students, and so on.

If you decide to give GoodReads a try, feel free to connect with me there. I’d love to connect with other teachers to see what others are reading.

What are some books that you’re planning to read this summer? Any other ideas for ways to use this app? I’d love to hear your ideas in the comments section, and I hope to connect with you on GoodReads!

Happy summer reading!

Original Mexican Mazel Mex

  • 2.5 cups cold water
  • 1.25 cups cornmeal
  • Generous dash cayenne pepper and/or cinnamon
  • 2-3 Tbs. corn oil
  • 3 onions, peeled and coarsely chopped
  • 8 large tomatoes, coarsely chopped
  • 1-2 fresh green or jalepeno chilis, peeled and coarsely chopped
  • 1-2 cloves garlic, peeled and minced
  • Diet Start
  • 1 Tbs. fresh cilantro, chopped and torn into leaves
  • 1 Tbs. fresh parsley, chopped

Combine water, cornmeal, and cayenne. Cook, stirring frequently, over medium heat for 5-8 minutes. Pat evenly onto bottom of 8″ x 12″ casserole.

Sauté onions in corn oil until translucent and fairly soft (10‑15 minutes). Add tomatoes, chilis, and garlic, and cook 2-3 minutes. Pour mixture over cornmeal base and bake in 350° oven for 20-25 minutes. To serve, sprinkle with cilantro and parsley.

YIELD: 2 servings.

Although taste is bitter if tomatoes are unpeeled, the peels are an important aid to digestion.

Hazel Enchiladas

  • 6-8 corn tortillas
  • 0.25 cup corn oil
  • 2 recipes Mazel Cheese Mexican
  • 1 recipe cooked Salsa Mazel
  • 1 recipe fresh Salsa Mazel

Dip corn tortillas in hot corn oil, then into cooked salsa. Fill with Mazel Cheese Mexican, and roll into enchiladas. Cover with cooked salsa. Bake at 350° for 15-20 minutes. Serve with fresh salsa.

VARIATION 1 Add I bunch fresh spinach, cooked and chopped, to Mazel Cheese Mexican.

VARIATION 2 Add 1 tablespoon fresh mixed chives and parsley to Mazel Cheese Mexican.

VARIATION 3 Use 1 recipe Mazel Cheese and 11/2-2 cups sour cream rather than 2 recipes Mazel Cheese.

YIELD: 2 servings.

Depending on size of tortillas and how you fill them, you may wind up with a bit of extra filling. If so, add it to the casserole or reserve it for another use. But better too much than too little.

And More: Deals and Sales – Guild Wars 2 is $24.99 Right Now

Woohoo! I have no idea when it started and no idea when it will end, but I just saw this with my own two eyes… if you are looking for one last reason to get GW2, it is now on sale for just under $25 American Dollars. That’s about £15 British Pounds if you are from the UK, руб890 Rubles if you are from Russia, 1500 Rupees if you are from India and what works out to be about $10,000,000 Canadian Dollars:

I just might get my own copy finally and be able to stop begging others to play theirs (you know who you are)… Go to http://buy.guildwars2.com/ to get it while it’s On Sale and See You In the Game!

My trip to Yapahuwa

I just completed an assignment for an international networked organization. They are in the process of establishing and sustaining a national level sister organization with district level branches which will belong to the same network.

The assignment was to critically look at the activities undertaken to sustain the district level branches. Well basically looking at the resource mobilization of each branch.

When considering resource mobilization for the development sector one automatically recalls the telethons and other fundraising activities done by charities to raise millions of dollars; quite similar to the ones that are going on for the Haiti earthquake relief operations.

However resource mobilization in the 3rd world is quite a different matter. It is fundamentally handicapped due to the following reasons.

  1. Most INGOs and Local NGOs operate in the 3rd world as project implementers. Therefore their articles of association / constitutions do not provide for resource mobilization (self generated / self raised funds).
  2. Due to above most states (in Asia) do not recognize them as registered charities that qualify for fund raising which is tax exempt.
  3. They are only allowed to receive funds from donors who already have funds or who have access to funds. Generally these funds when received in the implementing country are exempted from income tax.
  4. In fact, the local legislations which facilitate the registration of these entities for legal purposes themselves disallow any kind of activity which earns an income for the organization.

So, in order for an organization (NGO) to be legally able to engage in resource mobilization they have to:

1. Ensure that the articles of association / constitutions that they operate under provides for such activities.

2. Get the governments to recognize them as charities (this is generally done by conforming to already existing legislation or you would need an act of parliament or for parliament to pass new legislation to facilitate this).

3. Once you are registered as a charity that qualify for fund raising which is tax free you can look at the spectrum of resource mobilization activities which are at your disposal.

Fund raising activities in general falls in to the following broad categories.

  1. Cause / Issue based (HIV/AIDS, TB, Child Labour, etc.).
  2. Event based (Tsunami, War, Earthquake, etc.).
  3. Faith based donations to religiously affiliated organizations
  4. Bi-lateral funds.
  5. Multi-lateral funds

There is however another resource mobilization strategy which is “Income Generation Projects” which is: an organization (NGO) can engage in commercial activities such as training, providing a chargeable service, renting of assets, producing some products etc. to generate a profit. This profit is then used for development activities.

If an organization (NGO) wants to use this strategy they need to ensure that the articles of association / constitutions as well as the legislation / act of parliament clearly addresses’ this activity. Otherwise an organization may become liable for income tax. This risk may jeopardize the sustainability of the organization; therefore careful consideration must be given to the legal landscape before engaging in such activities.

However my client has started several “Income Generation Projects” without considering the above. There is a huge risk associated with this and no remedial action is being taken.

As for the income generation projects, they seem to have been started based on good ideas and not based on the profit they can earn to sustain a development project or a part of a project. Further they are being executed by the same staff taken to deliver development services (who by the way have no business skills) to the target groups; needless to say that the “Income Generation Projects” are doing poorly. They are hardly making profits some are making huge losses. In some cases, not only are they making losses, but they have very high turnovers which go beyond the value added tax threshold (VAT). This is a huge risk for the organization.

The assignment was well received by the client and they have already engaged me for a follow up assignment to develop realistic business plans for the “Income Generation Projects”.

Yapahuwa is a historic / archaeological town which boasts the second rock fortress of Sri Lankan kings. It is close to many not so famous archaeological sites and now boasts a new hotel – Yapahuwa Paradise. I recommend a visit to Yapahuwa if ever you are in the north west of Sri Lanka.

WORKOUT ANYTIME on Cincinnati.com

WORKOUT ANYTIME on Cincinnati.com

The article was written by Cincinnati Enquirer Business Reporter Bowdeya Tweh and was based on interviews coordinated with Tony Petrocelli and WORKOUT ANYTIME Vice President of Development Randy Trotter. The article begins with details about the opening of the WORKOUT ANYTIME in Montford Heights. The article gives information about the gym and about the company, as well as information on development plans in Ohio.        
Workout Anytime

You can view the full article here, and view contact information about WORKOUT ANYTIME’S new gym in Montford Heights here.

HOW TO DECORATE WITH NO MONEY

In the present times, the expenses are rising for everyone and this is the reason why budgets have become tighter. Having less or insufficient money, does not stop people from wanting things or wishing for them. The house is the place, where one spends the maximum amount of time and everyone wants that they house looks nice and attractive. There is a myth that if one wants to decorate or improve the house; they will need to spend a large amount of money.

HOW TO DECORATE WITH NO MONEYThis is not true as it is possible to decorate the house or a room without any money also. One needs to be attentive and use their creativity and in this way they can make the house look nicer.

One of the easiest ways to decorate a room or the house is to use everything that is already available in the house. One can use things which are packed off as of being of no use or one can use the things that are there in the room. Many times, just re arranging the furniture and the things in the house can create a new look altogether. Changing the color scheme of the room is also a good idea. One can use combinations of colors to create a new look. Throwing in new and vibrant colors in a room is also a good idea. New colors break the monotonous look of a room and help one change the way the room looks.

Another way to change the way a room looks is to add a painting or a wall hanging to the walls. This is a great way as it gives a new dimension to the room. A plain wall does not look nice and adding something to it can give a great look as well. One should always work on the larger area of the house and then move to the small ones. The house can be decorated with existing things in the house, and one can easily use these and decorate.For example you can use some oriental rugs from bedroom to put under the coffee table from living room. It is not always necessary to buy new things and decorate. Using the creativity one can create focal points in the house, and use this to create a new look in the house. When the focus of a room changes, it itself gives a new life and a new look to the room and this is one of the best and the most affordable ways to decorate the house without money.

My Free Font, Just For You™: LED SCREEN GTAMBLOG CAPS+ 2.0 (with Download Links)

An awkward name perhaps, for an odd little, simple version of an “LED Screen / Scoreboard Style Capitals Only” font (including Punctuation and Accents!) – but years ago, I contacted the author of a similar-styled font, to ask specifically for Commercial Use of his font, that looked somewhat like this one [I have been using it “Officially” here at The Blog since then – you can see Examples of it all over this site, on the images].

Today, I found Fontstruct, an easy-to-use, free, online Font creation utility – and thought “why don’t I make my own version this font, not only for ‘The Blog’ to use, but for others to possibly use as well?”.
And so, here is an ‘LED Screen’ or ‘Dot Matrix’ style font (also usable as a ‘Pixel font’) – with punctuation and a couple of ‘accents’ – but capitals only, as traditional LED Screens or Scoreboards (“Score Screens”) would have used; made by my hand, Just For You™…

I am distributing it as “LED SCREEN GTAMBLOG CAPS+ 2.0” by ‘Troy from The Game Tips And More Blog’, at various Font sites, such as those below (for Downloading, Updates as I add more and/or am approved by them). [If you prefer, contact me via email and I can also send you the TTF or Zip of the Font, from me, directly]:

  • Fontstruct (where I created the font by hand): 
  • https://fontstruct.com/fontstructions/show/1459839/led-screen-gtamblog-caps-2-0

  • Fontspace: 
  • http://www.fontspace.com/thegametipsandmoreblog/led-screen-gtamblog-caps-20

Feel free to Comment on those sites, or here (Suggestions, Questions, And More) or contact me via e-mail if you have any questions about the font, at:
[email protected]

Usage License: (Creative Commons, Attribution License, 4.0)
You are free to utilize this font for ANY purpose whatsoever, including Commercial Use and Monetization of any kind, Royalty-Free; the only condition being that you mention my name somewhere, anywhere, during use of this font.
If you would like to make a Donation, on behalf of using this font, you may do so via PayPal, using my email ([email protected]), but this is not required at all, to use this font for any purpose you desire.

As some of you may know, I have been playing around with Fonts off and on, creating them for various images/headers/etc here at The Blog over the years, compiling at least 4-5 fonts or so from scratch, with varying levels of completion… I ‘m not sure when I’ll get around to finishing all of them – but for now, I hope this font can perhaps be useful for some quick images, videos, or whatever you may want it for – Enjoy!

Edit:
 I may return and add some images and examples of the font… Soon™
Also, although I have made this font by hand at the Fontstruct website, I always suggest that you Scan any files you download (just in case), with an Anti-Virus utility of some sort – whether it is Windows Defender (built-in to Windows 10, after downloading) or via an online scanner/website, such as VirusTotal.com or similar.

Food Repair Guide: Baking Part 1

Bread

Bread, being about the first thing that man made, is also about the easiest. Ordinary bread is only flour, salt, liquid and yeast, well kneaded to mix, and baked. The modern cook with a food processor need not even bother about the kneading (which is only done to spread the yeast really thoroughly through the bread) as the food processor does it all for her. Unless, of course, she enjoys doing battle with balls of dough!

Ingredients/yeast

Flours differ but, as long as the flour is of good quality and dry, the differences are a matter of personal taste. Water is the normal mixing liquid and sea salt has a better flavour than table salt.

If the yeast is fresh and alive, when put in a damp, warm atmosphere, it will rise and grow whether it is incorporated in a dough or alone. Old age kills both compressed and dried yeast, as do extremes of temperature: anything over 110°F/50°C or below standard refrigerator temperature.

Once the yeast has been creamed by mixing it with sugar and a little warm liquid, it needs only to be thoroughly amalgamated into the dough, by hand or machine.

Diet Start

Rising, etc.

After the yeast has been mixed in, the dough must be left to rise, and in some cases prove. This will happen more or less quickly depending on the ambient temperature, but the longer it takes, the better the bread will be. Elizabeth David, among others, maintains that bread that has been left for 24 hours in a moderately warm kitchen will taste far better than bread that has been ‘hurried’ in a warming oven. However, an hour should be the minimum time — unless you are using a food processor and extra vitamin C to assist the raising.

If the dough does not rise, it means that the yeast is dead — whether through old age or overheating — and there is nothing you can do about it. Dead yeast has a smell and flavour not unlike dead cats and is totally unrevivable. Throw it out and start again.

Once you have mastered the basic techniques of bread making, all fancy breads are merely an elaboration on them. Most bakery books are extremely explicit in their instructions.

Cakes

Raising agents

Most cakes use eggs or chemical raising agents rather than yeast. The lighter sponges use whisked egg white; heavier sponges or fruit cakes use whole eggs or a combination of whole eggs and baking powder or bicarbonate of soda. These work by giving off gases when heated, thereby raising the mixture. The more chemical raising agent one uses, the lighter, dryer and less keeping the cake will be. Thus, fresh light sponges or angel cakes should be eaten within 24 hours to be at their best; a rich Madeira cake will keep several weeks; a fruit cake several months.

Mixing

The early mixing processes in all cake making are important, be it beating eggs and sugar to a ribbon or creaming butter and sugar for Victoria sponges. In both cases, early and thorough beating ensures that the cake will remain moist. Beating later in the process when the flour has been added will make the cake tough, heavy and elastic. Obviously, beating a light sponge after the egg white has been folded in would defeat the purpose of the operation.

For cakes that need to hold a filling in place — such as a cherry Madeira where you are attempting to keep the cherries in suspension — do not add all the liquid until you are sure that the full amount will not make the mixture too liquid to support the fruit.

Packet mixtures

If you feel that you cannot face the traumas of total cake making, there are a great number of excellent packet cake mixes on the market and you might be well advised to give up the whole business of being a home baker and use one of them.

Cooking

Follow the instructions in the recipe (or on the packet) for baking times and temperatures but do check yourself, as your oven may not behave exactly as the instructions say it should. Do not, however, continually open and shut the oven, as you will kill whatever chance the poor thing had of rising evenly in a constant heat. Similarly, when you test it, do not be too vigorous. If a light sponge gets a fat skewer stuck in it, it will break the crust and release half the air being carefully husbanded inside. Press the sponge very gently with your finger and, if it resists, it will be done. A more robust cake will stand the skewer treatment but, even then, do not do it more than you must.

Turning out

Whether the mixture is from a packet or home-made, it is most important that you are able to get it out of the tin when it is cooked. Greasing and flouring tins should work but has been known, only too often, not to — especially if the butter was salty! Invest in one, or several, loose-bottomed cake tins, which guarantee complete success — not only for cakes but for pâtés, mousses, jellies or anything else that you fear may lurk shyly in its container and refuse to emerge in public. If the mixture is very liquid, as in a very light sponge, line the tin with greaseproof paper to prevent it leaking out the bottom.

Paperless Mission #9: Setting Up Your Class with Evernote

This is the ninth installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

Mission #9: Set Up Your Class with Evernote

Today’s mission assumes that your class has easy access to technology. I teach in a 1:1 iPad setting, but I realize how blessed I am to have this and how few people — especially at the elementary level — get to do this. For those of you who have less access to classroom technology, I’m including modifications that you’ll be able to use at the end of the article.

It’s been a couple months since I started drinking the Evernote Kool-Aid, and I’m still loving it. I don’t have to worry about losing papers or information, and it has become my repository for just about everything. For the first time in my professional live, I feel like I’m getting a handle on organization. But then I see this:

And I’m reminded that just because I’m organized, doesn’t mean that my students are. In fact, all year long my fourth graders have been struggling with keeping track of class notes, transporting work between home and school, and remembering what materials to use to study for tests and quizzes. Part of that unquestionably comes with the age and maturity levels of 10-year-olds, but given how awesome technology has become, I knew there had to be a better way.

Enter student Evernote accounts. My students used Evernote on their iPads for the last 6 weeks of school, and I’ve been very pleased with the results. Here’s how we set it up.

Step #1: Register for new Evernote accounts.

This step can be done on either a computer or an iPad. (My pics will show the iPad view.) Students will need to have an email address in order to complete registration, but this can be tricky with students who are under the age of 13 since many of the students don’t have email yet. One work around that we found was to set up a class email address on Gmail (ex: [email protected]). Then, you can add the “+”symbol to the end of the username along with a string of letters and/or numbers before the “@gmail.com” ending. Evernote thinks all of these are different addresses, but Gmail doesn’t pay attention to anything after the “+” symbol, so everything will go back to the “fakeeberopolis” account. This lets students register without ever giving them an email address.

I had students put their lunch account numbers after the plus symbol, but names or other number combinations would work too. You just have to have the info after the “+” symbol be unique to each student so Evernote doesn’t think they’ve already registered. 

I let the students choose their own usernames and passwords, and I had them record those in a safe place so they could share them with parents. Next year, I’m likely to collect the information as well so I can easily help the students recover it. They don’t sign in and out of Evernote usually — they just stay logged in, so many of them forget.

Step #2: Build Notebooks for the Subject Areas

My students created notebooks for Reading, Writing, Word Study, Math, Science, and Social Studies. They later added notebooks for their Spanish and Music classes. During the set-up phase, we talked about the differences between notebooks and notes and how to move notes from one notebook to another. Next year, when I start this from the beginning of the year, we’ll also talk a lot about tagging notes to make them easier to find.
 

Why Student Evernote Notebooks Rock

1. More instructional time because transitions are so easy. Transitions between subjects used to take us forever because students would forget to grab a notebook or not have all the materials ready on time. Now transitions are just a quick stretch or brain break. They have all of their notes right in front of them already. We’re abandoning the cluttered bins and drawers.

2. Students are more accountable and prepared. We don’t have to worry about forgetting work at home or getting lost between home and school. It’s all in one place. In addition, students are able to create more comprehensive class notes. If we read an article using GoodReader, students can save it to their Evernote notebook. If we develop an anchor chart as a class, students can take a picture of it and add it to their notes to refer back to long after it’s gone from the classroom display. If they make a model of different types of triangles using toothpicks, they can photograph their work and add in captions later. More learning gets archived than we’d ever accomplish with a paper model.

3. Everything is portable between home and school. Students don’t get to take their iPads home, but as long as they save their work in Evernote, they can access it from any computer or mobile device. It also means that students aren’t leaving important readings or materials at school when they need to study for a test. I’ve had many frustrated parents complain that their child wasn’t bringing home the right materials to review for tests this year — especially because we don’t use traditional textbooks at my school — and this remedies all of that.

Another portability example is that I’ve also had students use Evernote as a word processor when they’re working on longer writing assignments because they can pick up their work between home and school. (In the future, I’d like to use Google Drive as their word processor, but until we get there as a school, this is an acceptable alternative.) Once students are ready to turn in a finished piece of writing, they copy and paste it into Pages, clean up the formatting, and turn it in through Edmodo. It has worked brilliantly this term, and I’m seeing much longer, more developed pieces of writing at all stages of the writing process now. I really think the ease of this process has played a role.

Now that we’re using Evernote regularly in the classroom, I can’t imagine ever going back. While I will miss the massive influx of office supplies (composition books, notebooks, etc) at the start of the next school year, I’m falling in love with the fact that the only things I take home with me each night are my laptop and iPad. Going paperless has been a glorious thing.

What are some ways you could use Evernote with your students? I’d love to hear about it in the comments section!

The Question of Alcohol in you Diet

Alcohol, like caffeine and nicotine, is a drug. As such, it is capable of bringing about serious damage to mind and body when taken over a long period of time. Made from the fermentation of carbohydrates with yeast enzymes, alcohol is rapidly absorbed through the digestive system, affecting coordination of the muscles, nerves, and vision. It also stimulates stomach secretions, inhibits mobilization of lymphocytes so that the body’s ability to fight infection is reduced, and causes sludging in the red blood cells, thereby reducing oxygen to the heart and lungs. And it affects the brain, adversely affecting the specific centers that govern self- control, judgment, and personal inhibitions.

Alcohol is a depressant. The transient feeling of well-being that goes with a couple of glasses of whisky or a dry martini—the “lift”—is followed by a series of miseries to which your body is subjected, not the least of which, for a woman, is the effect drinking alcohol has on the liver. And the insidious thing about the detrimental effects which alcohol has on health and beauty is that they occur even to the average social drinker, not just to the serious drinker and the alcoholic.

A joint study by Dr. Charles S. Leiber of the Section of Liver Disease and Nutrition at Bronx Veterans Administration and Dr. Emanuel Rubin of the Department of Pathology at Mount Sinai School of Medicine showed that too much social drinking can cause serious damage to the liver, even though the drinker may feel fine, act normally under the influence of alcohol, and not be an alcoholic. Leiber and Rubim took a group of healthy nonalcoholic volunteers and put them on a carefully controlled eight-day drinking regimen. Then they tested the subjects’ livers to see what changes, if any, the alcohol had caused. The amount given to a particular group was considered equivalent to the average intake of a business executive-7 ounces of 86-proof whisky per day for the first four days, 11 ounces for the new two, and then 14 ounces for the last two. The results were surprising: there was an increase in the fat levels in the subjects’ liver of from five to thirteen times, all in only eight days, and in spite of the fact that the diet of the subjects had been supplemented with vitamins.

Diet Start

Similar studies have turned up similar results. Researchers have also found that liver-cell damage and the increase in fat in the liver can be reversible if the drinker abstains from alcohol for long enough. But longterm damage to the liver resulting from daily consumption of alcohol over the years can be irreversible. Persistent drinking can also be a precursor not only to specific diseases of the liver such as cirrhosis, but also to other toxic conditions in the body.

Next to the skin, your liver is your body’s largest organ. In many ways it is also the most important. One could, for instance, live without a stomach if necessary but never without a liver. It is the body’s chemical purifier, performing more than five hundred different functions, many concerned with detoxifying the system from all the drugs, pollutants, and poisons you take in every day, including alcohol. If the liver is overworked or worn out by excess alcohol consumption, eventually and unavoidably your whole body suffers. Biochemists used to believe that excess alcohol was no more damaging to the liver than too much sugar or too much fat in the diet; that the real damage to the liver came only from malnutrition. But these theories have been disproved. Both the quantity of alcohol you drink and the duration of time over which you drink it are important factors in determining liver damage.

Because the liver is responsible either directly or indirectly for controlling levels of many hormones in a woman’s body (particularly estrogen), when liver damage occurs as the result of a diet too high in fats or of drug taking or long-term alcoholic consumption, the endocrine balance can be severely upset, leading not only to disruption of the menstrual cycle but also indirectly to feelings of depression, anxiety, and chronic fatigue.

These troubles may have another cause, also related to alcohol. In order to metabolize alcohol, your body calls on its reserve of many B- complex vitamins which act as coenzymes in the process. When one eats foods containing natural concentrations of carbohydrates or sugar, such as grains and fruits, the B-complex vitamins necessary for their proper digestion and assimilation are provided by nature in the foods themselves. But the B-complex vitamins have been discarded in the processing of highly refined sugars and alcohol. So the body’s own reserves can easily get depleted when you drink alcohol and eat refined sugars. Results of this depletion are many, the most common of which can be fatigue, a craving for more alcohol or sweets, or diverse emotional complaints from severe premenstrual tension to simple feelings of chronic misery.

These are just some of the reasons why the Lifestyle Diet excludes alcohol in quantities of more than a glass of wine a day. This may seem like a tremendous sacrifice to you if you are used to taking a great deal more, but once you eliminate stimulants such as coffee, tea, and alcohol from your life and begin to experience the enormous sense of well-being that comes with the low fat, low protein, complex carbohydrate diet (and all the other important things that also go with discovering and expressing your potentials mentally and physically, such as deep relaxation and exercise), you will never miss it.

PIONEER STUDIOS OFFICE MICROSOFT BY SKB ARCHITECTS

The New Pioneer Studios Office which was designed by SkB Architects starting from the idea that need a space to socialize at night as well as it functioned during the day.

Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

The Easiest Way to Implement a Classroom Economy

As my life continues to get crazier, I am constantly looking for ways to simplify and improve the things that I do. This year, for example, I decided to merge Class Dojo with my classroom economy, and so far, it’s going very well! Here are some of the tweaks I made to make this merger work.

My Classroom Economy

I’ve been using a classroom economy since I started teaching, and every year, I make a few tweaks. The basic idea is that every student applies for a class job at the beginning of each term (our terms are 6 weeks long). I’ve previously posted about my classroom jobs here. I display the jobs in my classroom so that we’re constantly reminded who is responsible for what. This year, I’ve used a pocket chart for my classroom jobs (sorry for the blurry photo).

I used to give students $100/week as their salary, or about $20 per day. They’d have weekly and monthly expenses, and then they could use any remaining money to purchase items in our class store. The complete program is detailed in my Classroom Economy Megapack on TpT.

I love the system, but I felt like I wasn’t as consistent as I wanted to be in tracking student behaviors to give fines or bonuses, and there were many Friday afternoons when I was so involved in whatever we were working on that day, that I just didn’t leave enough time for them to shop. 
Meanwhile, I was dabbling with Class Dojo, and I wanted to figure out a way to tie that in as well. If you’re not already familiar, Class Dojo is an online behavior management system that allows you to give and take away points from students. You can create your own categories for points, and you can access the class info from any device — laptop, computer, iPad, iPhone, etc. I liked that portability because I always have one of those devices in my hands, and I could give or take away points without really interrupting what I was doing. 
The solution came for me this year when Class Dojo allowed for the creation of weighted point values! Before, you could only give or take away a single point at a time. Now you can create points on a scale of 1-5 and weight particular behaviors accordingly. This is done in the set-up for behaviors. 
1. Go to Edit Class on your class screen and select “Edit students and behaviors.”


2. Select “Behaviors” and either click on one of the exiting behaviors, or the plus symbol to customize the behaviors.


3. Change the icon (optional), name or rename the behavior, and then click the box to access a pull down menu of point values to weight that item.

And that’s it! You can weight both the positive and negative behaviors according to your needs. Here are the settings I have now for my classroom economy.

I basically divided the $100 weekly salary by 10, and scaled everything else back the same way. Students now get 2 points daily for their salary (10 points per week) and bonuses for different behaviors. The only other positive behavior that I’ve weighted more currently is helping others because I’m really trying to encourage that in my classroom. I’m also going to add a +4 for a class compliment because I like when they do a good job with other adults in the building.

For negative behaviors, I deduct more points for breaking rules outside of my classroom and for disrespecting people or materials. I also now deduct their taxes and rent through Class Dojo, and when they shop, I deduct their points in here. I price everything in multiples of 2, but then I found that I wanted a -5 shopping once they had enough points for some of the larger ticket items in our class store. I dislike that it shows up in the “Needs Work” tab, but I don’t think it’s a problem overall. The parents know what is happening from the descriptors, and we just talk about it in class from the stance of making or spending money. It’s the easiest way to deduct some points without resetting the points entirely.

Since transitioning to this modified system 7 weeks ago, my classroom economy has become more accurate and effective in a fraction of the instructional time. Class Dojo has replaced the clip chart that I used to use, and it helps with some of the accounting. I’m still using the bulk of the resources from my Classroom Economy Megapack, however.

If you’re interested in trying out Class Dojo with the rest of my Classroom Economy Megapack, I’ll be offering the product on sale at half price through Tuesday. It is one of my best sellers, and if you’re looking to change up your classroom management routines or enhance your existing classroom economy, I don’t think you’ll be disappointed. I’ve also discounted the rest of my TpT store 20% to celebrate my return to blogging after a busy start to the school year. Those sale prices will go now through Tuesday, so check them out!

Join the Mailing List! 

Did you know that I have a mailing list so that you’ll never have to miss a post? Use the link at the top right of this page (under Never Miss a Post) to subscribe to my mailing list. You’ll get my posts delivered to your inbox, and you’ll also get access to some extra resources that I’ll be offering to my mailing list only. Given that my PhD work has really cut in to my blogging time this past year, the mailing list is the best way to make sure you see my new content. I promise not to spam you or share your contact information ever. 
Have a great week!

Quick Tip: NVIDIA ‘In Game Overlay’ Stopped Working? Here’s How To At Least Get It Going Again [Fix / Workaround, Updated 2018-03-26]

Whether it wants to be called Shadowplay, Share or [as of the time of this post] In-Game Overlay; it doesn’t really matter to most people I think – we just look for something to record our gameplay once in a while, maybe take some Screenshots, ‘and just work’. Thankfully, NVIDIA’s In-Game Overlay [or whatever it may be called by the time I finish this post, heh] does just that. Most of the time.

Although I rotate between a handful of different recording programs off and on (such as Bandicam, Action, Playclaw and others – just for fun and also slowly working on another ‘Game Recording Comparison’ for the future), In-Game Overlay [built into the NVIDIA Drivers, aka “for free”] records when I want, it records a Buffered Loop (a timed, re-recording of ‘the last xyz seconds’, to save when needed) – and it even takes Screenshots and more. However, sometimes this big fella has just ‘stopped working’ lately. No saving Screenshots, no Recording, no Error Message, Nothing; and I wasn’t sure why… After only a tiny bit of Troubleshooting, I quickly figured out how to at least ‘get it going again’ and I just wanted to share that here for you all, in a Quick Tip™.

To be honest [I always believe in being completely honest], I am still not sure why NVIDIA’s In-Game Overlay stopped working – but I did figure out how to simply get it working again – and here’s what I did:

  • Once I noticed the Overlay wasn’t taking Screenshots, I looked to see if the Overlay itself or more of the (many) NVIDIA utilities were still running, in the Task Manager. They were. [The In Game Overlay’s Executable is still called “NVIDIA Share.exe”, btw]
  • Thinking that something might have gone wrong with the Overlay utility, I opened up NVIDIA’s GeForce Experience.
  • In GFX [my accro.], I clicked on the ‘gear’ in the upper-right corner, “Settings”.
  • In the Settings area, I clicked on the switch/toggle for In-Game Overlay.
  • Although it took longer than normal, it eventually turned Off. Clicking it again, it turned back On.

That’s it! After those steps, the In-Game Overlay was working once again. Taking a Screenshot, for example, the notification from the Overlay came up, and the Screen was saved. It also started Recording again, without issue. Here is a ‘Tutorial Image’ of the steps to take:

Tutorial Image of what steps to take to ‘restart’ the NVIDIA In Game Overlay;
the recording utility built into the NVIDIA Drivers
(Click to see Full Size)

Although I do not have any details on why it failed, I still thought this short ‘tip’ would be helpful for people that might run into this (“shadowplay not recording” or “in-game overlay not taking screenshots”, etc) – so I wanted to share it here. HTH!

Update, 2018-03-26: Just a quick Update, that as of March 2018, I have run into somewhat of an extension of this issue, where GFX is no longer responding to this simple ‘toggle’ of the In-Game Overlay… Doing so (which used to temporarily ‘fix’ the issue above), now merely results in an ‘error’ message box, stating “That Didn’t Work. Try Restarting Your System.”, which although polite, is not very informative as to what caused the error or what else can be attempted to isolate/troubleshoot the issue further:

Doing some more research online, I see many others running into this issue, as well as its’ ‘extension’ here… However, there still is no absolute ‘fix’ for this problem yet [at least, none that is verifiable and repeatable, which I prefer to have as a qualification to my sharing it here as a “fix”] – therefore, I cannot say for certain what can be done to fix it, even though a wide range of things have somewhat worked for others (some early steps work, others must use further steps), such as:

  • Uninstalling/Reinstalling GeForce Experience
  • Installing an older version of GeForce Experience
  • Utilizing a third-party ‘drivers uninstaller’ to completely remove NVIDIA’s GPU Drivers and Reinstall NVIDIA’s GPU Drivers/GeForce Experience [AMD users can get a similar utility directly from AMD]
  • Reinstallation/Formatting of entire system (eg. Windows) and Reinstalling NVIDIA GPU Drivers and Reinstalling GeForce Experience

Once I find out what actually is a solid fix for this issue, I will state so here and post it in big, bold lettering [lol], along with a Tutorial Image (text on an example image of the solution, etc). Until then…

Globesity

THE RISKS FROM OBESITY

Being overweight can induce:

¨ Diabetes (type 2: non-insulin‑dependent)

¨ Coronary heart disease and strokes.

It increases the risks of:

¨ Cancer of the colon, prostate, uterus, cervix, breasts and ovaries

¨ Gall-bladder disease

¨ Musculoskeletal disorders and respiratory problems.

We live in a world where half the population seems to be obsessed by dieting, while the other half is suffering from starvation and malnutrition. We have no control over the natural disasters that leave millions fighting to find enough food to survive, but why is it that so many people — not just in the Western world, but also in developing countries — are becoming overweight, leading to soaring levels of diabetes, cardiovascular disease and certain cancers?

We may have made huge advances in technology, but we seem to have lost our connection to nature, and nowhere is this better illustrated than in the food we eat. Our meat is sold in sterile packaging, and contains antibiotics, growth hormones and pesticide residue. We eat (well, some of us eat) fruit and vegetables that are sprayed, waxed, dyed and sometimes irradiated to make them look attractive. The grains that form the bulk of many people’s diets are stripped of their fibre and nutrient content. And the milk we drink is pasteurized.

Diet Start

Because there is so much choice, so little time and sometimes so little money, many people choose the convenient pre-packaged or fast-food option, rather than insisting on good-quality, naturally produced, locally available produce. They would rather sit and watch a cookery programme on television while eating a TV dinner or a take-out than get into the kitchen and cook a healthy meal for themselves.

According to the World Health Organization (WHO), in 1995 there were an estimated 200 million obese adults worldwide, and by 2000 that figure had increased to 300 million. But obesity is not just a problem restricted to adults -25 per cent of children and adolescents in the US are overweight. The problem is beginning to replace malnutrition and infectious diseases as the most significant contributor to ill health worldwide. Obesity is now recognized as a disease in its own right, but one that is largely preventable through changes in lifestyle – especially diet.

A lesson from dietary history

For years we have been fed the information that a low-fat/high-carbohydrate diet is the healthiest one for us. The ideal ratio, based on our calorie intake, is 55 per cent carbs, 15 per cent protein and 30 per cent fats. This ratio may work for some individuals, but it certainly isn’t right for everyone, particularly those whose carbohydrate intake is based on the wrong sort of carbs.

One of the most thought-provoking arguments for reducing the amount and type of carbohydrates that we eat is the story of Palaeolithic people. Genetically, there is very little difference between ourselves and our hunter- gatherer ancestors, although our diet has certainly changed.

Palaeolithic people were treading the Earth thousands of years before we started to cultivate crops and rear animals for food, and according to scientists they existed on a diet that was primarily protein. Between 60 and 90 per cent of their diet consisted of game animals, eggs, birds, reptiles and insects. The rest comprised green leafy vegetables and berries. Obviously they were leading a far more active life than the average 21st-century human being, but their diet must have been in part responsible for their healthy bones, flawless teeth and good musculature.

It was only at around the time of the agricultural revolution, about 10,000 years ago, that we started to rely on starchy vegetables such as potatoes and cereal crops for the bulk of our diet, and lifestyles became more sedentary. By 4,000 years ago the effects of the change in diet were beginning to be seen in the human body:

¨ There was a reduction in people’s stature

¨ Dental decay and malformation of the jaw had become widespread

¨ Disease and epidemics were starting to shorten the human lifespan.

WORKOUT ANYTIME on WFMY News 2

WORKOUT ANYTIME on WFMY News 2

The WFMY News team had WORKOUT ANYTIME Franchisee Jeff Cook on the show to talk about how to do explosive exercises in just a few minutes each day. Mary Anne Mills from WORKOUT ANYTIME was also on the show from WORKOUT ANYTIME and they went through 4 different exercises that can be done at home to burn calories fast. In the next segment Mary Anne and Jeff went through exercises that show moms how they can work out while being pregnant. Mary Anne goes through exercises that build up endurance for labor and how to keep off weight while some moms “eat for two”. They went through the different cardio machines that keep the baby safe and go through a donkey kick exercise. Lastly, the station mentions where the WORKOUT ANYTIME is located in Greensboro and how to get more information on personal training sessions.


You can view the full segment here. 

ROUTINE FOR PUTTING ON WEIGHT

Plenty of rest and exercise, a good diet of fattening foods and no worries—those are the essentials

PUTTING on weight is very much more difficult than taking it off. Even thosefew extra pounds which can make all the difference to the appearance, comfort and, no doubt, general health, can be quite a problem.

Before embarking on a diet, it is always advisable to seek the advice of your own doctor. This is particularly important if there has been a sudden or prolonged loss of weight for no good reason and without affecting normal appetite. Where loss of weight is the result of an illness or operation, it is usually quite quickly and easily regained after recovery. The routine to be described will help in such cases, subject to the approval of your own doctor.

We are concerned here chiefly with that large army of men and women who are anxious to put on weight but who are the thin type by nature. Such people are born worriers, with excitable and energetic natures and over-active bowels, whose food does not remain in the intestines long enough to be properly absorbed.

Diet Start

Essential in the fattening process are:

  • Keep calm and stop worrying. That is obviously a counsel of perfection to those who easily get worked up, but it can be achieved by cultivating outside interests that take your mind away from the source of anxiety (it may be professional, domestic, financial, or all three).
  • Take plenty of rest. A minimum of between 8 and 9 hours in bed at night, plus between 10 and 30 minutes after every meal.
  • Avoid rushing about, but take regular exercise. On no account jump up immediately after a meal; take life at a leisurely pace. Strenuous games are good if you really enjoy them, because they create appetite; so does any form of outdoor exercise, however mild.
  • Eat well and regularly, and concentrate on the fattening foods (list follows). But be careful not to stuff between meals or you will defeat the whole object and be unable to eat your main meals, which are far more important. You must also avoid over-eating, with the inevitable danger of indigestion and biliousness. Aim at three good meals a day, plus any extras (such as sweets, etc.) which you really fancy and a hot, preferably milk, drink last thing at night. The housewife should take as many meals out as she conveniently can because she will not have the worry of preparing them.
  • Cut down your smoking. It diminishes the appetitite, so, if you must smoke at all, only after meals, please.

Sugar, sweets, jam, marmalade, fruits in syrup, treacle, honey, Golden Syrup.

Cakes, scones, pastry, cereals, bread, biscuits, puddings.

Thickened soups and gravies, sauces made from flour, butter and/or milk.

Fried foods, cream, salad dressings, butter, dripping.

Pork, duck, goose. All fat meat and bacon. Tinned fish in oil.

Sweet wines, beer, stout, spirits, sweet aerated waters.

Dried fruits. Bananas, grapes, plums. Potatoes, peas, dried beans, parsnips, beetroot.

Cod-liver oil, Virol, olive oil.

Salt with food.

Foods with very little fattening value

Meat extracts. Marmite. Clear soups. Gelatine. Egg-white.

Green vegetables and salads. Vinegar. Tea. Coffee.

SPECIMEN DIET FOR PUTTING ON WEIGHT

Minimum: 1 pint of milk per day

On waking: Cup of tea, preferably with milk and sugar.

Breakfast: Cereal or porridge with milk and sugar or honey or syrup.

Bacon, egg, fish, etc.

Toast, butter and marmalade.

Coffee or tea.

11 a.m.: Coffee, cocoa or milk and a biscuit, or try this cocktail: One teaspoonful Spanish olive oil sandwiched between layers of orange juice in a wineglass. You can increase the quantity of olive oil gradually.

Lunch: Thick soup, if liked (if this makes it impossible to eat main course, substitute tomato or orange juice as an appetiser instead).

Meat, fish, game, poultry, etc.—both fat and lean. Serve with gravy, roast or fried potatoes and a green vegetable or salad with plenty of oily or cream dressing.

Pudding and / or cheese, butter and biscuits.. Coffee.

Tea: Tea with cake or bread and butter or banana sandwich.

Dinner: Thick soup (see Lunch).

Fish, meat or poultry, with gravy, at least one vegetable from list of Fattening Foods; one green vegetable or salad with cream or oil dressing.

Steamed or boiled pudding or milk pudding or ice cream.

Cheese with bread or biscuits and butter.

Coffee.

NOTE: Cocktails, wines. etc., may be taken as desired and obtainable. Stout or beer is good.

Bedtime: A hot drink, preferably containing milk.

Limitations of Organization Capacity Assessment (OCA) tools

Since April of 2002 I have been involved with Strategic Planning, Restructuring, Re-engineering, Organization Revival, Organization Analysis, Organization Capacity Assessment and Organization Development projects across sectors and boarders. Most of the tools that ate used for this purpose can be traced back to a few general tools which were made famous in the latter part of the twentieth century. Increasingly I have felt the need to further customize these tools in a way that they become more relevant to the current context. This customization has been happening in the past and continues at a faster rate at present.

The single biggest reason that I attribute for this need is that; today we live in a technological age which has some peculiar characteristics. The characteristics are that we need to innovate and improve not only our products but also how we do things inside the organization at a faster rate. This is nothing new; most of the thought leaders of our time have made big bucks selling this message repackaged with additional jargon. These characteristics currently affect most of the knowledge based industries. However as time goes by their affect on every organization be it government, private or development sector will grow exponentially.

As mentioned above since we have to improve the way we do things inside an organization we run into the human dimension of things. We are also aware of the “change management” that needs to happen inside the organization to facilitate the “keeping up” with the changes that drive our organizations toward bigger and better things. However we don not consider that some of the changes required may be limited by the knowledge / intellectual capacity of the staff (here staff include owner directors, CEOs, CFOs, CIOs, and CKOs). In some organizations we may have staff that has reached the limit of their intellectual prowess. When an organization reaches this level it is said to have arrived at the door step of “mediocracy”

The current tools that most of our contemporary consultants use for organizational diagnosis will not help identify this issue of “mediocracy”. However there are some characteristics that are peculiar to these organizations where they have reached the glass ceiling of intellectual limitation / mediocracy. Let me take a few cases from assignment that I have done in the past and elaborate this.

The 1st example that I would like to take is an ICT company that started over 25 years ago. The organization has been fairly successful in keeping up with the changes in the ICT technology; and has been making above industry average, earnings per share. However in the early 21st century there was a need to re-strategize to keep up with the faster pace of change in the ICT technological environment. I was invited to develop a new strategic plan for this organization. By this time I had already identified some of the key markers of an organization that has reached its pinnacle based on the intellectual capacity of its staff; and I was able to identify them in this organization during my first meeting with the senior management of the organization. I suggested to the Managing Director who invited me that the organization not only needed a new strategic plan but it also needed a corporate renewal plan and a VRS. This suggestion was not looked at favorably and I was asked only to develop a strategic plan.

The markers that I identified were:

1. The organization starts adding parallel value chains to the existing organization structure.

2. Organization does not move forward or backwards in the value chain

3. The organization does not spawn new businesses that are “stars” / neither are they known for any innovation (other than the innovation of some of the principles / 3rd party brands that they may represent)

4. History of young star performers leaving the organization on a continuing basis

5. Boasting of people (the young starts) who have left the organization and gone to achieve great things as been trained at this organization.

6. Long serving staff in a particular discipline / technology / expertise

7. Some staff that leave the organization after a few year (not the stars) join the organization again as a manager or a senior in the same field of expertise

8. Staff talk of the same obstacles that they face every year (one years experience repeated over many years) as opposed to innovating / re-engineering / work-a-rounds to overcome obstacles

9. Large number of managers based on technical areas as opposed to value addition

10. Staff do not take up higher education or professional development

11. Average age of staff moves parallel to the age of the organization

The above 11 markers as identified by me is a clear indication that the organization has run out of ideas and the incumbent staff are not able to get the organization out of the hole that it has dug for itself. They need fresh blood and a new playing field to continue being profitable. In its current state it will just survive but never reach its former glory / heyday it enjoyed in the beginning of its existence.

The 2nd example that I would like to take is a research organization set up to do applied economic research. This organization too has been in existence for over 30 years and had enjoyed considerable success in the early part of its existence. This organization too displayed the following common markers as identified by me earlier.

They were:

  1. Long serving staff in a particular discipline / technology / expertise
  2. History of young star performers leave the organization on a continuing basis
  3. Boasting of people (the young starts) who have left the organization and gone to achieve great things as been trained at this organization.
  4. Some staff that leave the organization after a few year (not the stars) join the organization again as a manager or a senior in the same field of expertise
  5. Staff talk of the same obstacles that they face every year (one years experience repeated over many years) as opposed to innovating / re-engineering / work-a-rounds to overcome obstacles
  6. Large number of managers based on technical areas as opposed to value addition
  7. Average age of staff moves parallel to the age of the organization

In addition they displayed the following:

  1. Doing (research) work in traditional / theoretical / safe areas as opposed to doing applied / non traditional / contentious issues based research (Not competing in your space as mentioned in the mission but trying to compete in the space that you perceive to be good at / running back to mama so to speak; relying on your academic training as apposed to innovation)
  2. Contempt / arrogance towards younger organizations (doing applied research) and relying on the age of the organization and past performance as a mark of value (of research) as apposed to quality, (rigor), and relevance to current context.

The above may be considered anecdotal by some; but over the past 8 years across 19 countries I have come across these markers with increasing frequency across private, government and not for profit / development sector organizations which are not considered to be in the knowledge driven sectors.

The question is; are we at the stage that this initial varying degree of prevalence of the markers in other sector may become the norm across organizations and sectors? Only time will tell. However, I am convinced that we are seeing the beginning of another divide that will start another wave of brain drain as organizations start to realize this phenomenon and start to poach intellectual staff from all over the world.

Workout Anytime on FOX 19

Workout Anytime on FOX 19

Tony Petrocelli from Workout Anytime was recently featured on a segment on FOX 19 in Cincinnati. The segment is about what women do wrong while working out. Tony then talks about the locations and mentions that there are franchise opportunities.

Cincinnati News, FOX19-WXIX TV

You can view the full segment here.

How to Deal with Yourr Seasonal Allergies

S
Seasonal allergies to pollen and mold seem to getting more and more prevalent each year with progressively more severe symptoms in sufferers.    Treating allergies with nutrition and nutrition supplements can have big advantages over using medications.   
Allergy medication most commonly comes in the form of Antihistamines, and there are some big problems with long-term use of these medications.     It is now known that prolonged use of antihistamines decreases levels of acetylcholine which is a key neurotransmitter involved in memory and other important functions.   In fact, antihistamine use increases the risk of senility, dementia and Alzheimer’s Disease.
What are Allergies Anyway?
Allergies are abnormal immune reactions to specific agents (proteins) known as antigens/allergens, which include many substances such as foods, drugs, pollens, dust mites, animal danders, feathers, along with many others. 
Allergies may also develop when an otherwise innocent substance has significant contact with an already inflamed surface (known as sensitization).  For example, when sick with a respiratory illness, respiratory surfaces are already inflamed and substances present at this time may be “remembered” as being foreign.  This can also occur with chemical substances known as “haptons” which are combinations of self and non-self which can lead the immune system to attack the self. 
Since there are multiple pro-inflammatory substances involved with allergies it is rare to obtain adequate control with single products/medications.  The most potent chemical mediators in allergies and asthma are leukotrienes.  Some leukotrines are one thousand times more potent than histamine as stimulators of bronchial constriction and allergy. 
Interestingly, many medications that reduce one inflammatory pathway actually boost leukotrienes.    For example, Aspirin and other NSAIDs (Non-Steroidal Anti-Inflammatory Drugs like Ibuprofen) result in the production of excessive levels of leukotrines in sensitive individuals although they decrease prostaglandins associated with inflammation and thereby relive pain.  So long term they can create a much more severe problem.
Asthma is linked to allergies and can be a severe and life threatening condition.   Do NOT try to self-treat Asthma – see a physician!
Strategies for Allergies
Try to avoid allergens by using air filters, regularly cleaning all surfaces and vacuuming and keeping your air-conditioning system on while regularly changing filters to filter out as many allergens as possible.   Remember your car cabin filter as well, and take showers and wash clothes after being outside for long periods of time.
Change your diet to reduce inflammation.    Dramatically reduce your intake of refined carbohydrate – sugar and starch which drive insulin which drives inflammation.  At the same time increase your intake of low glycemic, organic fruits and vegetables such as berries, broccoli, Brussel Sprouts, etc.   These plant foods contain polyphenols which are potent anti-oxidants and help to reduce inflammation and allergies without side effects.
Increase your intake of Omega 3 Fatty Acids from cold water fish such as Alaskan Wild Salmon and/or take an Omega 3 Supplement such as Krill Oil.    Omega 3 fatty acids will always reduce inflammation if taken in sufficient dosages so this should be a primary strategy for allergy sufferers because they produce many side benefits.   The only exception is people taking any type of medication to thin blood and reduce clotting like Coumadin.   In this case the combination can be dangerous!
Nutritional Supplements for Allergies
There are several highly effective nutrition supplements for allergies including some key herbs.
Local Raw Honey – it MUST be local and must be raw because it will contain small amounts of local pollen and works by getting the body used to pollen much like an allergy shot.     A Tablespoon a day is as much as you need.   Many people swear by this simple and safe remedy!
Stinging Nettle Extract – this herb has a long history of effective use for allergies and freeze dried preparations seem to work the best and are best taken BEFORE allergy season even begins to put a damper on symptoms before they start – this is true of all nutritional approaches to allergy by the way!
Euphrasia Officianalis – aka “Eyebright” is an herb which name says it all – it is highly effective for eye allergy symptoms.
Quercetin – is a flavonoid contained in high amounts in apples, peppers, red wine, dark cherries and berries, tomatoes, cruciferous vegetables such as broccoli, cabbage and sprouts, and raw red onions.   To treat allergies taking supplemental quercetin is the way to go, and a good quercetin supplement is a product called “AllQlear” by Integrative Therapeutics and can be purchased on Amazon.     It also contains “ovomucoids” from quail eggs that act as tryptase inhibitor and prevent release of histamine.    Another excellent Quercetin Supplement is “Qforce” – http://www.qforce.com/ Quercetin is proven to decrease yur chance of contracting a viral illness like the cold or flu by 9 times!
Boswellia Extract – Boswellia aka Frankincense (yes the herb mentioned in the bible!) can be highly effective for allergies and other forms of inflammation including arthritis because it blocks the formation of leukotrienes!    To get the benefits you must take 5-loxin which is a specific extract.   Note that in some individuals 5-loxin can cause or excacerbate heart burn so it is not for everyone, but when it works it can be highly effective!
Butterbur Extract – this plant extract can be highly effective for inhibiting leukotrienes and allergy symptoms or side effects.   You need to take a standardized extract with standardized levels of Petasin and Isopetasin) and free of Pyrrolizidine Alkaloids aka PA.  High quality brands include Life Extension, Swanson, and Enzymatic Therapy to name a few.   This product can also help many migraine sufferers and is a well-researched, proven treatment.
NAC – N-Acetyl Cysteine – helps thin mucus naturally and boost levels of the body’s most important antioxidant Glutathione – every allergy sufferer should be taking 600 – 1,200mg per day!
You will also find combination of these ingredients in particular products, and it is worth experimenting a bit because if you find the right product or combination of natural products you can find relief without sedation and without the side effects associated with antihistamines and more potent drugs like steroid nasal sprays or oral steroids.

Paperless Mission #11: Getting Started with Edmodo

This is the eleventh installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

Mission #11: Get Started with Edmodo

One of the tools that I started using in the classroom this year is Edmodo. If you’re not familiar with it, Edmodo is a learning management system that allows students and teachers to interact online in safe environment. It looks and feels a lot like Facebook but without all of the potential problems Facebook could create — especially for very young users.

1. Create a teacher account and create your group for your class.
Teacher accounts are free, and they’re the first step toward using this in your classroom. Parents and students aren’t able to access Edmodo unless they know the access code that a teacher has given them.

2. Add some content for your students to engage with the first time they use Edmodo. You can ask a question for discussion or take a poll as a good first activity. You’ll want to have something queued to go so that students don’t just start posting randomness. (They may do that anyway at first, but you can at least buy yourself some time to talk about guidelines and procedures for that before they get too carried away.)

3. Invite students by giving them the Group Code. This is unique to your group, and students will need an access code for each group they join with their student account. Joining your group doesn’t give them the power to search for other groups. Similarly, if another teacher at your school is using Edmodo, he or she will also have a Group Code that students can enter and just add the group to their account. It’s pretty easy.

4. Once all of your students have joined the group, lock your group. This will prevent other students from other classes inadvertently joining, and it’s generally a good security measure. You can always unlock the group temporarily later on if you end up getting a new student.

5. Create an assignment. This essentially creates a place for students to turn in their work. Everything that they complete on their iPads gets turned in through the assignments I create on Edmodo. Then I can see which students have turned it in, assign grades, and give feedback. The beauty of this system is that I can grade work as it comes in without worrying about losing something. This is especially helpful on larger assignments where students tend to stagger their completion.

6. Give quizzes. I won’t lie — this is probably one of the most tedious parts about Edmodo from a teaching perspective. You have to manually input all of the questions, and there’s currently not a way for teachers to share their quizzes with one another. But the time you put in on the front end of creating the test is more than made up for on the back end by the immediate grading of the multiple choice, true false, and matching questions. I’ll talk more about Edmodo quizzes in a future post.

7. Set up small groups. You can create multiple small groups within your group, and students can belong to more than one small group. That means that you can have small groups for reading as well as different small groups for research projects in Social Studies, etc.

Preparing Students

My students really did see this as Facebook-lite, so it was important that we created some guidelines as a group. Here are some of the rules we discussed and implemented as a class:
  • Use posts to discuss school-related content only — not to share personal information or “status updates.”
  • Use appropriate school language and grammar, not texting language.
  • Be positive and kind and show good “Netiquette.”
My fabulous media specialist, Sandi at Teacher Technotopia, did a series of lessons with students about “Netiquette” prior to this, which helped a lot. I also moderated the conversations a lot at the beginning. As the teacher, you can delete things that other students post and you can send that student a direct message to let them know that you deleted their post and why you did so. That helped with my class tremendously.  
As a side-note, one of the things I like about Edmodo is that you can send your students direct messages, and they can send you messages, too, but they can’t send direct messages to each other. Anything they post is either public within the group or for the teacher-only. This eliminated some of my concerns about possible cyber-bullying.

How I Used This in My Classroom

Once we got going with Edmodo, I used it constantly. Virtually every test (except math) was done through Edmodo. It was also great for collecting student work, taking polls, and facilitating class discussions. For example, when we were deciding what our class team name would be for field day, I was able to relegate that entire conversation to Edmodo rather than take up valuable class time on it. I also love that students can access Edmodo from any computer or mobile device, so they could keep going on assignments even if they couldn’t take their iPads home. It’s not a perfect platform, but it was really helpful in my move toward a paperless classroom.

Do you use Edmodo in your classroom? I’d love to hear your thoughts about it in the comments section!

Managing the Work/Rest Ratio in HIIT Training

High Intensity Interval Training aka HIIT training is all the rage and there are many different HIIT training protocols available, but to produce the best results it is important to understand how to manipulate the Work/Rest Ratio.    The Work/Rest Ratio is the ratio of time spent working in the high intensity interval to the time spent in the recovery interval and there is no one ideal Work/Rest Ratio. In fact there are three distinct methods you can use to design interval training programs based on how you manipulate the Work/Rest Ratio.
Fixed Work, Fixed Recovery
This is the most common method and often used for group training because it keeps everyone working together.   In this method the amount of time spent in the work phase is fixed as is the amount of time in the recovery phase.   For example the ever popular “Tabata” Protocol is a fixed work, fixed recovery protocol using 20 seconds of work and 10 seconds of recovery done 8 times.    Another example is the Sprint 8 protocol which uses 30 seconds of work and 90 seconds of recovery.  In addition, all MX4 programming uses this method either for a 60/30 work/rest ratio or a 4 to 1 Minute Work to Rest Ratio during Density Workouts.
Needless to say there are endless variations of fixed work, fixed recovery interval protocols and each one feels different and allows for a different level of relative intensity.    The advantage of these type of protocols is that they are very simple to design and very easy to track using a simple timer, and if using heart rate monitoring you can adjust the actual work intensity and recovery intensity based on individual heart rate response.   Also this is a very easy way for a trainer to manage a group as mentioned previously.
Fixed Work, Variable Recovery
In this method the amount of time spent working is fixed, but recovery time varies based on heart rate response.  This method is a more individualized way to do HIIT training where each work interval begins after the heart rate slows to a predetermined point correlated with a specific level of individual recovery.  The advantage of this method is it can be customized to each person based on their goal, age and current fitness level.   An example would be doing a 1 minute work interval with a fit 20 year old and setting the recovery threshold at say 120 beats per minute (a relatively low exercise heart rate for a fit 20 year old).  So he would work as hard as he can for 1 minute then go into recovery and stay in recovery until his heart rate slows to 120 beats per minute.
Variable Work, Variable Recovery
This method varies work time AND recovery time based on preset work heart rates and recovery heart rates.   For example using the same example of a fit 20 year old you might set a goal work heart rate threshold at 180 beats per minute – meaning that you keep him working hard until his heart rate hits this work threshold and then immediately begin recovery.    Then you would keep him at a reduced work rate until he hit a predetermined recovery heart rate threshold such as 120 beats per minute.    This is a highly sophisticated and highly individualized way of exercising with precise management of work and rest customized to the individual.
Have some fun and experiment with each of these to prevent plateaus in your workout progress!

Happy New Year from The Game Tips And More Blog! [NewYears’ Greetings 2017]

“Happy New Year 2017 Greetings”
by The Game Tips And More Blog
(Just Cause 3 capture, Highest Settings and FXAA, with Text and Effects added)

I personally wish you all much better things in 2017!

[To help celebrate the end of a crazy 2016 (for almost everybody, it seems) and the beginning of a hopefully-better 2017, this was simply a fireworks celebration captured in Just Cause 3 (Highest Settings, FXAA). I then added a ‘crowd’ overlay that had a bit of ‘glitter’ effects in it (used with License from CyberLink’s PowerDirector 12) and put some Just Cause 3 – styled text  on top of it all (using a free font called “Dirty Old Town” which looked somewhat like the JC3 font and another one whose name escapes me at the moment). Lastly, I put a “Text FX” Overlay effect to show the year, an effect that was also in PowerDirector 12. As always, it was seemingly simple to think of, but took longer than expected to complete the composition (almost a day late for NewYear’s, heh). 
HAPPY NEW YEAR ! ]

Game Material by Avalanche Game Studios (avalanchestudios.com) and Square Enix (square-enix.com)
Captured and Edited by Troy from The Game Tips And More Blog

EXOTIC CONCEPT HOME FULL COLOR VERY JUOOOOZZZZZZ

Have you ever seen life, both in the apartment before? Usually, when it comes to so many colors, we have to overcome the enormous risk of visual confusion room. However, in this situation, it seems that everything is in place and atmosphere that inspired this apartment is the energy and extreme informality. Especially designed for young working couples, this house is a fusion of passions and interests. As their styles are very different and they wanted some of their own furniture to integrate into their new home, things were very difficult for designers.

EXOTIC LIVING ROOM CONCEPT HOME FULL COLOR

EXOTIC LIVING ROOM CONCEPT HOME FULL COLOR

EXOTIC DINING ROOM CONCEPT HOME FULL COLOR

EXOTIC DINING ROOM CONCEPT HOME FULL COLOR

EXOTIC KITCHEN CONCEPT HOME FULL COLOR

EXOTIC KITCHEN CONCEPT HOME FULL COLOR

EXOTIC BATHROOM CONCEPT HOME FULL COLOR

EXOTIC BATHROOM CONCEPT HOME FULL COLOR

EXOTIC BEDROOM CONCEPT HOME FULL COLOR

EXOTIC BEDROOM CONCEPT HOME FULL COLOR

Teachers’ voices matter, and I want to hear from you!

Hi bloggy friends! I know it’s been forever since I’ve updated this blog, and trust me — lots of ideas are percolating in the hopper about my flipped(!) fourth grade classroom and other things I’ve tried this year. I promise those posts are coming! But in the meantime, I need your help!

As some of you may know, I’m working on my PhD in addition to teaching fourth grade full-time. The work-life balance has not been an easy thing, and now, I’m really working hard to finish as much coursework as possible in the short term because baby #2 will be arriving in November! (So while you all are hanging out by the pool having tasty margaritas, I’m crunching numbers for a stats class and reading about how to write ethnographic fieldnotes. Good times, I tell you…)

This summer, I’m starting to work on my dissertation, and I’m testing out my ideas in a pilot study. I’m planning to write my dissertation about the amazing elementary blogging community and the ways that teachers use blogs for professional development and personalized learning. I know that reading other teachers’ blogs has been hugely inspiring for me as a teacher, and I can’t imagine what I would do if I didn’t have access to so many great teaching minds across the globe. Shockingly, however, very little has been written about these great online communities and their benefits, and I want to explore that further. Scholars, politicians, and administrators need to know how much teachers learn from each other! Which is why I need your help.

I’m looking for a few teachers who would be willing to be interviewed about how they use blogs to support their work in the classroom. I want to talk to both bloggers and readers, so even if you don’t have a blog of your own, I’d still like to talk to you. This first wave of interviews will take place next week (June 20-26) and they will all be done online via Skype or Google Hangouts. I anticipate that each interview will last 45-60 minutes.

If you are willing to participate, could you please fill out this form so I can contact you directly? In exchange for your time, anyone who participates in an interview will receive up to $20 worth of free products from my TpT store.

Loading…
Once you fill out the form, I will be in touch to arrange a time that will work best for the interview. I need to conduct (and transcribe!) at least 3 interviews next week to fulfill the requirements of my current coursework, but don’t let that small number deter you — I will need many more interview participants once I move beyond my pilot study and begin work on my actual dissertation, so I’d love to have a list of possible interviewees already started. And my offer for the free products from my TpT store will still stand.

I hope that you will consider participating! I look forward to talking to you and learning from you.

My Trip to New Delhi & Hyderabad Cont…….

Today I finished the 2nd organizational capacity assessment of research organizations. I must say that I was impressed with this organization in terms of its outputs. I was equally impressed as to how they have been able to manage the organization with limited resources.

On the way to the organization today I was able to take a photograph of the 3 wheeler which was kitted out as a tipper and used for garbage collection. Here it is.

Carbohydrates, good or bad for dieting

Another distinction that some nutritional counselors make is between refined and unrefined carbohydrates. In dieting index weight loss, we prefer to classify carbohydrates as low-, medium-, or high-dieting. However, because you’re bound to hear carbohydrates defined as refined and unrefined, this section discusses how the terminology relates to the dieting index.

Refined carbohydrates are more highly processed than unrefined carbohydrates. Processing includes such activities as cooking, milling, and separating the whole food into parts. Examples of refined carbohydrates are white bread, white rice, most packaged breakfast cereals, donuts, cakes, cookies, bagels, fruit and vegetable juices, fruit drinks, soda, and candy. The list goes on. Refined carbs are usually high-dieting, but some can be low, as in vegetable juice and some fruit juices.

Diet Start

Unrefined carbohydrates are those kept in their natural state. In general, the unrefined carbohydrates tend to contain more fiber. Examples of unrefined carbohydrates are whole vegetables and fruit, whole grains, dried peas and beans, and nuts and seeds. Some foods are processed more than others. For example, fruit juice is not processed as much as fruit drinks. Usually unrefined carbs are low-dieting, but not always, so be sure to check the dieting index listings before you eat them.

Pastas

Even though regular pasta is a highly refined, processed carbohydrate, its dieting value can be low, medium, or high, depending on how you cook it. If you cook spaghetti for only 5 to 6 minutes, its low-dieting. Other types of pasta may need slightly more or less cooking time. If you open a can of prepared spaghetti in sauce, those noodles will have a higher dieting index because they’re mushy.

Cook pasta just until it softens and you’ll be eating a healthier meal. The longer pasta is cooked the more available the starch in the pasta is for quick digestion—exactly what you don’t want.

The Good and the Bad

Carbohydrates aren’t good or bad; the difference is in how you eat them and how much of them you eat. This is one of the reasons why dieting index weight loss works so well. You don’t need to give up your favorite treat food, whether it’s white bread, bagels, or candy bars. But you do need to eat them in such a way that you don’t cause a quick rise in your blood sugar levels, and you do need to watch portion sizes.

The dieting index gives you a way of managing your blood sugar and insulin levels, thus assuring that you aren’t storing fat and also that you continue to lose weight.

One way to do this is to manage your dieting load by meal and by day. You’ll be balancing the low-dieting foods with some high and some medium, and overall, you can keep your insulin levels low.

Now’s the time to give up the notion of bad and good carbs and of fattening and nonfattening carbs. Instead, accept all carbs as okay, based on how you eat them.

Eat more and more, do you know chemicals in foods blow you appetite?

In a very real sense, everybody has direct reactions to foods. Direct reactions are reactions caused directly to cells by chemicals in foods. Among the most obvious direct reactions are those caused by alcohol. If you drink alcohol, you are almost certain to experience sedative effects, due to the direct effect of alcohol on your brain cells.

Often, people with Asian heritage react quite negatively to alcohol, and the common belief is that they’re allergic to it. Technically, though, they don’t have an allergy; they have a sensitivity — because this is a direct reaction, which doesn’t involve the immune system. I believe that it’s clearer and more sensible to say simply that Asians often have a food reaction to alcohol, since food reactions include both allergies and sensitivities.

Diet Start

Direct reactions, however, can eventually involve the immune system, because sooner or later the immune system is called in to repair the mess that direct food reactions cause. Therefore, the symptoms of direct reactions can feel much like allergies. Because of this, direct food reactions are sometimes called false food allergies.

Alcohol has obvious direct actions, but most direct food reactions are more subtle. Often, direct reactions occur when chemicals in foods bind with the cells that produce histamine; these cells are called mast cells. When this happens, it can cause the release of histamine. The food chemicals that are most likely to do this are lectins, which are most often found in wheat, peanuts, and beans. Another cause can be certain partial proteins, or peptides, that are found in tomatoes, strawberries, shellfish, pork, chocolate, and eggs.

Other foods that often seem to cause direct food reactions are mustard, pineapple, papaya, buckwheat, and sunflower seeds. Ironically, one patient of mine had terrible digestive symptoms, including severe heartburn, and took large amounts of digestive enzymes to help the problem. However, his enzymes were full of papaya, which he later found he was reactive to. When he stopped taking the digestive aids, his digestion improved immeasurably. Moral of the story: don’t trust common knowledge about what’s healthy — trust your own experiences. Everyone is different.

Other foods that sometimes cause direct reactions are those that contain high levels of natural histamines. Histamines are formed in foods that are allowed to age and ferment. Therefore, histamines are often found in aged cheese, sausage, and salami.

Other foods that can cause direct reactions are those that contain the partial proteins tyramine, phenylethylamine, and octopamine. These chemicals, like histamines, can cause blood vessels to expand and contract, which causes tissue swelling. In the head, blood vessel constriction and expansion can cause migraine headaches. That’s why people who get migraines often shun the foods that are high in these partial proteins, such as wine, aged cheese, citrus fruit and yeast.

Another common foodstuff that often causes direct reactions is the artificial sweetener aspartame. Aspartame is mostly composed of the partial protein, or amino acid, called phenylalanine. In some people, it acts directly on brain cells, causing symptoms such as agitation and depression. In other people, it causes blood vessels to contract and expand, triggering migraines. In most people, though, it causes no reaction at all.

Many people also react to MSG, or monosodium glutamate, with headaches, nausea, dizziness, heart palpitations, and confusion. Others react to various additives, including nitrates, sulphites, and artificial food colours.

Another name for direct food reactions is pharmacologic reactions. That’s a good description, because it implies an important point: foods, like drugs, are chemicals. Not all drugs are good for you — and not all foods are, either.

Now let’s look at the last type of food reaction: immune complex reactions. This type of reaction is not well known. But it should be. It can be a killer.

Foods, like drugs, are chemicals. Not all drugs are good for you, and not all foods are, either.

Quick Tip: Fallout 4 – TAB Key Stopped Working And Not Bringing Up The Pip-Boy? Here’s A Possible Fix [Text-Only]

I have been having a ton of fun playing Fallout 4 lately [again, building up my Settlements too much and ignoring the Main Storyline!] and ran into a ‘small-but-game-stopping‘ issue where the TAB key appeared to stop working. “Hitting TAB wasn’t bringing up the Pip-Boy anymore..??”

After doing some Troubleshooting and paying attention to what I was doing and pressing… it turned out to be a very simple issue – the TAB key was ‘locked’ out because of how I had used it in the Console.. Let me explain briefly:

I was playing around with SweetFX in ReShade off and on again, mainly to take Screenshots as I had lost a ton during a recent Hard Drive failure [as in thousands.. I know… but I don’t usually back up screenshots or recordings].
To open the Settings/Configuration for ReShade, the hotkey combination is SHIFT+F2.

Unfortunately, something in this combination of Fallout/ReShade/Windows ‘locks out’ the Shift Key after doing this with the Console open in FO4, and when hitting Tilde again to close the Console, this leaves TAB ‘disabled’ and it no longer brings up the Pip-Boy.

[This can also happen with the ENB series of utilities, which use SHIFT+ENTER to open and close the interface]

The Fix for this was simple, once I figured it out: hit Tilde again to open up the Command Console, then hit SHIFT once, then hit Tilde again to close the Command Console. That’s all there is to it!

Now the TAB key worked and I could bring up the all-important-and-totally-cool Pip-Boy once again! This is just a Quick Tip in Text-Mode only then; but I wanted to get it typed up and posted so that it could start to help out others that have run into this little problem [that seems to occur especially if running ReShade or ENB, in Fallout 4]. HTH

It’s Not Just You™ – HumbleBundle ‘Vegas Pro, Discover Creative Freedom’ Installer/Registration Not Working [Notification]

For the next two weeks (13 Days, according to the Countdown at the HumbleBundle Website, starting today) there is a fantastic offer for Video Editors, Music Composers, Web Developers and more – over $900 worth of Software, including Sony’s Vegas Pro [the Vegas Editing Product Line was bought out by MAGIX, a German software company that has produced it’s own editing software for years, popular for their “Music Maker” and “Movie Edit Pro” lines]. So what’s the issue? Well, this Bundle is so darn popular, many parts of it aren’t working/responding, at this time. For example, if you run into the Installer ‘starting but just closing/crashing’ or the store or program ‘not registering’ or the ‘website is down’… just letting you know… It’s Not Just You™

Part of the reason why this Bundle is so popular (although many HumbleBundles are quite popular at different times), is because one of the main pieces of Software offered is Vegas Pro Edit, originally by Sony. This video editing software is a Premium Version (“high end”) of this program, normally being sold at around $400. Along with other great products, such as Magix Music Maker, Xara’s Photo and Graphic Designer, Xara’s Web Designer, Photo Story Deluxe and more – it’s easy to see why this Bundle is so popular, for all kinds of content creators and producers. Indeed, if you are into (or trying to get into) making music, editing video, or web design, at all; I highly recommend picking up this fantastic bundle of software, if you can. The link/URL to the HumbleBundle directly, is here:

https://www.humblebundle.com/software/vegas-pro-creative-freedom




For those unfamiliar with HumbleBundle, it is a retail site that offers a mix of software, books and games, connected to and donating a portion to, a customer’s chosen Charity. For example, my account is connected to Extra Life, the ‘Gaming Marathon’ Fund Raising charity that I try to play for every November, on behalf of Children’s Miracle Network Hospitals. Because I attached this Charity to my Account, any purchases I make will contribute a portion to my charity. One of the greatest things about HumbleBundle however, is that the products – although one is not able to choose which products to buy specifically – are usually offered in ‘portions’ or ‘packs’ for any amount that you can afford to pay (as low as $1 up to whatever you can pay for the software company/charity/etc); and the more you can pay/donate, the more software/books/games/etc you will get. Since 2010, these ‘Pay What You Want’ Bundles (for Windows, Mac and Linux) have become quite popular over time.

The issue that has arisen this time then, is that the Bundle is so popular, that the server for the Installer has become Unresponsive (“not working”). Even the Website for the Retail/Vendor/Developer itself has become Unresponsive, giving this Error Message [to me] seen below (from Chrome):

As also sometimes happens with the most popular HumbleBundles, some people are experiencing very slow Downloading of their purchased products (as in 256kBps or less). Others are experiencing the Installer for the products stops functioning. This is what I personally am experiencing too (the Installer seems to startup, but then ‘crashes’ (or at least disappears) and is unable to continue. After one random attempt, I got a message stating that the Installer actually tried to Download the Installation Files but could not properly communicate with their servers. The message that came up [for me] can be seen below:

Trying another time later on, I did see the Installer for the ‘MAGIX Music Maker 80’s Version’ pop up and start Downloading, which was nice to see; however the overall download speed was pretty slow [understandably] at about 300kBps.

If I may make a Suggestion then – if you are running into any of the issues above, at this time: my suggestion would be, to definitely pick up the Bundle if you can [Note: You have to purchase the Bundle for at least $20 to get Vegas Pro] – then wait a while before you attempt to install anything. According to the MAGIX website, you can access your purchase (to install it) anytime after buying it, from now until September 2018 [Note: A free Magix account must be created if you do not already have one]. So, there is no rush, once you purchase it, to get the Installation Files from MAGIX. I also recommend backing up your Installation Files, once Downloaded, onto a USB drive, External Drive or even Optical Disc – anything that can back up your purchase for future re-installation, if needed (at least, until you buy a newer version of any applications you like..).

By the way, a quick note about Vegas Pro ‘Edit Version’ (about a 450MB download) – for those wondering about the difference between the Vegas Movie Studio versions and the Vegas Pro versions (and what the ‘Edit’ identifier means), here is a short summary of the differences:

  • the Movie Studio versions of the editor are an easier-to-use, scaled-down version of the Vegas editor, with still many features, allowing up to 200 Tracks of Events (clips/media) – increased from 20 Tracks recently! It just lacks many of the advanced features of the Pro versions (such as the  ‘NewBlueFX Titler’ [professional version], Bézier Tool Masking (“any shape”), et.al). The Movie Studio version comparisons can be found here:

    http://www.vegascreativesoftware.com/us/vegas-movie-studio/product-comparison/#productMenu

  • the Vegas Pro ‘Edit version’ of the editor costs less than the other Pro(fessional) versions, as it is missing the DVD/Blu-Ray authoring package, as well as some advanced filters and creation utilities (such as the Boris FX media generators, et.al) – it is still a ‘full featured’ Professional-level Video Editing program however, allowing Unlimited Tracks, full 4K Support, Bézier Tool Masking (“any shape”), includes the ‘NewBlueFX Titler’ [professional version] and much, much more. The Pro version comparisons can be found here:

    http://www.vegascreativesoftware.com/us/vegas-pro/product-comparison/#productMenu


[Note that the links above will show the most recent versions of the programs, but the comparisons themselves (the effects and capabilities of each) will remain similar, despite the edition versions changing over time]

Here is a capture of the Vegas Pro ‘Edit version’ comparison, for the 14th edition [CAD prices, sorry]:

Although the Vegas line of editing products have always had a bit of a learning curve due to their more advanced capabilities (Sony used to give out a DVD with some introductory courses for it; I am privileged to say I have one of these), MAGIX has created a few tutorials of their own, which can be found at the MAGIX Vegas Pro Tutorials website, here:

http://www.vegascreativesoftware.com/us/vegas-pro/online-tutorials/

So, try not to let it bother you ‘too much’, if you have run into any of these issues (downloading, installing, registering, etc). Just wait a little while longer and try doing it again, in the near future. For now, don’t worry – It’s Not Just You™…

Good Luck with it – and Have Fun!
[Note: I am not affiliated with Sony, MAGIX or HumbleBundle in any way, and I will not receive any compensation for mentioning them here – I am merely an enthusiastic user of their products and wanted to share what I felt was helpful information/notification. I have used other video editing programs in the past (such as PowerDirector, Nero Vision and Windows Movie Maker and some free video editors, such as Avidemux, DVD Soft’s FreeVideoEditor and VirtualDub) and will still use them when desired in the future]

Addendum:

During the time it took for me to compile this posting, I was able to try again and began Downloading then eventually Installing Vegas Pro [Edit version] – and it is going smoothly still – however, Downloading of the various applications in the Bundle are still quite slow. 
If you do not mind that, dear reader, go ahead and try again now; otherwise, as in my Suggestion, perhaps wait a while (as in days) before attempting to have a fast/smooth installation of these popular applications. 

Why Teachers Love Technology

An infographic about “Why Teachers Love Technology” was recently shared with me, and on the heels of yesterday’s post, I felt like now is a good time to share the infographic with you.

What do we Know Infographic
Graphic from OnlineUniversities.com

Do you love technology? I’d love to hear why in the comments section!

Quick Tip: Planetside 2 – Medic Revive Not Working [Note]

Just a quick tip for those who have recently jumped back into playing some frantic Planetside 2 and thought there was something wrong with the medic tool, being unable to revive, thinking they can’t revive, etc – there was a patch a bit back that changed the Medic Tool so that Left-Click will Heal and Right-Click will Revive. Although changing such a long running/’staple’ operation is a little lip-pursing, it should have the overall positive effect of assisting with attempting to revive within a tight group of teammates (instead of your tool randomly healing someone close, it should more effectively target the face down teammate on the ground). Just a note.

See You In The Games!

WORKOUT ANYTIME in the Idaho Business Review

WORKOUT ANYTIME in the Idaho Business Review

WORKOUT ANYTIME was recently featured in an article in the Idaho Business Review titled, “New 24-hour Gym Chain to Expand into Idaho”. The article begins with details about the brand’s plans for expansion into the northwest, including Idaho. The article then provides background on how Rick Hascall (WORKOUT ANYTIME Pacific Northwest Area Developer) and Chris Gately (WORKOUT ANYTIME North Florida Area Developer) met while overseas. Rick and Chris talk about the plan to open a club by the end of the year and then use that as a showcase for other franchise prospects. The article closes with more details about the brand, information on the investment, and how WORKOUT ANYTIME is able to grow in large cities.
You can also view the full article here.

My Trip to Pakistan – Islamabad December 2011

This is my first trip to Pakistan after 9/11. The last time I was in Pakistan was in 2008, most of the contacts I had made during my last visits have not resulted in any business. However I was able to secure a training assignment which; believe it or not took 2 years to secure. It just goes to show how some clients work. The need for this training was identified over 2 years ago but due to financial and other ground realities they were not able to run the training course in Pakistan.



The travel plans were made and I set off to Pakistan on the 9th of December. The journey started well as I got upgraded to business class and had a pleasant journey to Karachi. I was scheduled to take a domestic flight from Karachi to Islamabad. Things started to go bad when I landed. I made my way to the check in counter to learn that the PIA (Pakistan International Airlines) flight to Islamabad was cancelled. They just did not bother to contact the agents or the passengers to inform them of the cancellation. The PIA ground staff were however polite and quickly arranged me to stay at the Airport Hotel and take the first flight out to Islamabad on the 10th morning. I had to call my client and the hotel in Islamabad to inform them of the changes to my itinerary. Hurrah to mobile roaming!


My perceptions of an Airport Hotel were based on the other airport hotels which I had stayed in (Dubai, Bangkok, Amsterdam); however the Airport Hotel in Karachi is another matter altogether. It is a real dump. I am not running down Pakistan or its people as I have stayed in very good hotels in Karachi and Lahore on my previous visits to Pakistan. This was a real house of horror. The rooms were dirty and smelly, the bathrooms were dirty and the dining hall was something else altogether. The table cloths were full of food stains and looked like they have never been bleached since the day they were made.


The management of this hotel needs major overhauling if it is to be an airport hotel. The staff of the hotel belongs in a farm looking after animals and not in a hotel serving weary travelers. They have no idea of how to handle guest in the hospitality industry.


I left the hotel early morning (on the 10th) and made my way to the airport to catch the flight to Islamabad. Things ran smoothly from then on and reached Islamabad on time. I was met by the Islamabad Hotel (http://www.islamabadhotel.com.pk/ ) representative at the airport and was taken to the car park to embark on the short drive to the Hotel. In the car park I saw this amazing site of a fork lift being used to move cars that had parked violating the parking rules.

I settled in at the hotel and met the client in the evening to prepare for the start of the training. The training on Institutional & Organizational Development will run for 5 days with 25 participants.


The first day of the training went well and the atmosphere in the training room was good and positive the client was very happy at the end of the day and was keen to keep the same momentum during then next 4 days.


The second day of the training also went along as planned and was well received by the participants. After the training I went to the shops (Jinnah Super Market) with one of the participants as my guide. Islamabad boasts of quite a few good shopping areas with some well stocked shops in clothing. The main thing that struck me is that you do not see poverty on every corner. Islamabad seems to have a majority of middleclass to upper class people living in the city. Quite a contrast to Karachi and Lahore where you do see poverty as it is common in other cities of South Asia.


The third day of training went smoothly without incident. After the training I met the managing director of a company which I met last when I was in Lahore in 2008. We were unable to build a working business relationship since we last met (9/11, war in Sri Lanka and the deterioration of the security in Pakistan which led to the Sri Lankan cricket team being attacked). We discussed the opportunities for joint collaboration and agreed to take the business relationship to the next level. Only time will tell is we are able to do this.


The fourth day of the training too went well and we will be going out for dinner with all the participants. We all made our way to Monal Restaurant located about 4000 feet above sea level (http://themonal.com/monal.htm ) at the top of the hill at Margalla Hills National Park for a night time view of the city of Islamabad.

I recommend to all who visit Islamabad to go for dinner at this restaurant, the view and the food was exceptional and so was the service. After dinner we went to Gelato Affair (www.gelatoaffair.com ) at the Gole Market to have dessert. The ice cream selection available was enormous and great tasting.


The last day of training went according to plan and was able to conclude the training program on time as planned. The participants were appreciative of the efforts of the trainer and received excellent feedback through the training evaluation. After the customary goodbyes and promises to keep in touch we concluded assignment.


The trip back to Colombo was on schedule; unlike while arriving at Islamabad the flight back to Karachi was on time and managed to arrive at Karachi without any hassle.

Exercise and Fall Prevention

As people get older one of the biggest threats to their health and independence are falls.  A brief review of the statistics on falls provides a sobering view of the threat.

 Falls are the #1 cause of death as a result of unintentional injury among people 75 and older and the #2 cause of death as a result of unintentional injury among people age 65 – 74.
Falls are the #1 cause of non-fatal unintentional injuries treated in hospital emergency rooms in every age group except ages 15 – 24.
Fall result in the second most expensive worker’s compensation claims with an average cost of $23,929.
One out of every three people older than 65 will fall this year.
50% of the people older than 65 who have fallen will fall again in the next 12 months.
Most falls are unreported (even serious falls) because senior fear losing their independence, and many seniors would rather die than lose their independence.
The treatment of osteoporosis with drugs is very ineffective at preventing fractures because it does nothing to prevent the primary cause of fractures which is falls.
Modifiable Risk Factors for Falls

Strength (in particular lower body and core strength)
Mobility (of ankle, knee and hip in particular)
Fear of falling from previous fall/s resulting in altered gate and restricted activity levels which further increases fall risk
Poor Balance which has three systems (visual, inner ear, proprioception)
Impaired Vision
Cognitive Status/Mood
Environmental Factors (slippery floors, rugs, poor lighting, etc.
Medication Side Effects
Exercise for Fall Prevention
Exercise can help address several fall risk factors including strength, mobility, balance along with improved cognitive status.
The most effective exercise boosts lower body and core strength while including a balance component that can be adjusted to each individual’s current capabilities.   This exercise should be weight bearing whenever possible and functional in nature.
reACT – Rapid Eccentric Anaerobic Core Trainer

One of the finest ways to address the exercise component of a fall prevention program is the use of the reACT Trainer.    The reACT Trainer provides a no impact training stimulus with a self-selected range of motion and allows for progressive balance challenge to fit just about any ability level.  
The reACT Trainer is a functional eccentric trainer meaning it provides eccentric dominant exercise that is highly functional in nature with strong emphasis on integrated functional movements in multiple planes of motion with the ability to adjust movement speed to increase or decrease the challenge level.   It is also a very safe training modality.
For more information on how the reACT Trainer can help prevent falls check out the following videos:
https://www.youtube.com/watch?v=IBjKkvuXrYE&t=213s

https://www.youtube.com/watch?v=WXljK8BbhLg&t=309s– instructional video

speed camera major malfunction? Or lazy police not reviewing photos? New Orleans police failed to review tickets generated by the automated cameras, and one guy has 10 tickets over 7 years for his parked truck

Actually, make that 11. After the first story ran last week, Schultz received another ticket on Saturday night. A security camera shows this one was actually triggered by a New Orleans Police Department vehicle speeding down the road, but as usual, Schultz was the unlucky recipient of the fine.

http://www.thedrive.com/news/20011/new-orleans-speed-camera-keeps-issuing-speeding-tickets-to-parked-cars

End result? More proof cops don’t give a shit about their jobs, and neither does the mayor or city of New Orleans. 2 cops certified that the two tickets initiated by speeding police vehicles (as seen in the video) went to Shultz. That’s just bull shit. Cops are speeding in a residential neighborhood, and other cops that are supposed to look at the damn photos, are not, they are rubber stamping them all. 

Spotted in a hoarders driverway

the front yard was covered in a variety of junk.

Just run across this while out walking about. I think behind it’s a Corvette, and in front of it was a 1990 is Firebird GTA 

Are You Ready for NaNoWriMo?

I plan to encourage my students to participate in NaNoWriMo again this year. For those of you who aren’t familiar, November is National Novel Writing Month, or NaNoWriMo for short. It’s the month where tell your inner-editor to hush so you can just let the ideas flow on to the page. It’s about getting something done without worrying how perfect it is, because you can always go back and revise in December.

Last year, as October drew to a close, I introduced NaNoWriMo to my class. I explained the premise, and gave them the option of taking on the challenge. We talked about word count goals and commitment to writing outside of the classroom. Then the fun started. Student after student signed up, each cheering each other on as they dedicated themselves to writing a book. In the end, I think all but two students decided to participate. We had weekly lunch meetings where students could eat and share their writing with friends, and although not all students met their goals, they definitely started to find their voices as authors.

The Young Writers Program for NaNoWriMo has some great teaching materials to get your students psyched for NaNoWriMo and to teach them about narrative writing in general. You can check out their website at http://ywp.nanowrimo.org/. In addition, there’s still time to order a NaNoWriMo classroom kit which comes with a student goal setting poster, NaNoWriMo stickers to track progress toward a goal, and buttons for those students who participate or finish. The classroom kit is free (and awesome), but they request a $10 donation for the materials — a small price to pay to get your students excited about writing.

In honor of NaNoWriMo, I’ll be hosting a month-long link-up that will start on November 1 and run the duration of NaNoWriMo. Whether your class officially participates in NaNoWriMo or not, I hope you’ll join me in sharing the great writing work that’s happening in your class. Grab the button, spread the word, and meet me back here on November 1st for a writing extravaganza!

In the meantime, check out the Educators’ section of the Young Writers Project. I’m sure you’ll find plenty to get you (and your students) excited for a month full of creative writing!

Who’s in?

Game Recording with MPEG-4: using H.264/AVC in Programs such as Dxtory, Bandicam and MSI’s Afterburner (Text-Only, Long Version)


This article is a Text-Only version, showing how to use a few programs (one of them completely free) to utilize this efficient codec in game recording, using steps and settings that I personally found optimized performance and showing which ones slowed things down when recording. 
For a video example of how to set the x264/AVC codec recordings to be editable in
Sony’s Vegas or Adobe’s Premiere video editing applications, see my post about it here:
http://gametipsandmore.blogspot.ca/2013/06/and-more-how-to-record-with.html

The MPEG-4 video codec has been around for over a decade now. I remember recording TV shows to watch later on, on a system with an ATI All-In-Wonder videocard (back when videocards had only 8MB of VRAM!) and the joy of the changes I was seeing, going from compressing the shows in MPEG-2 format to MPEG-4 using either Quicktime or DivX (or it’s open-source competitor, XviD). Smaller file sizes and still decent quality? Awesome. Those were MPEG-4 Part 2 or ASP (Advanced Simple Profile) iterations of MPEG-4. Today, we are up to MPEG-4 Part 10 or AVC (Advanced Video Coding) and great times are to be had by all who record their video game adventures, as modern hardware and capturing apps allow not only for h.264/AVC to be used for video compression and archiving – it can also be used for small filesize ‘live’ game recordings and great retainment of detail, if desired.

Dxtory, Bandicam and MSI Afterburner all provide the ability to utilize the various codecs installed on your system to record with (others do as well, I am merely choosing these more popular game recording apps as examples). To record with MPEG-4/h.264/AVC, it is simply a matter of installing that codec on your computer [if it isn’t already], then choosing it inside of whichever game recording app you prefer. The codec’s interface (GUI, Graphical User Interface) will allow you to change whatever settings you wish – but these settings will be quite different from what you may be used to, if you have done any h.264/AVC video compression in the past. Why?

Because we are going to be balancing the settings – not just for retaining quality at a small file size (as you would like to when archiving a movie to keep on your computer) – but now also for recording speed. For instance, if we try to set things for high compression and attempt to keep detail at the same time (as we would for archiving a movie), it simply takes too long to process and compress the changes between frames ‘on-the-fly’ and save them into a file, when attempting to record game output. This would result in the game ‘lagging’ and dropping frames to try and keep up, as it falls behind dealing with analyzing and compressing and then writing the data, resulting in a video with ‘choppy’ playback as well. So, when recording our gameplay ‘live’, we must now consider the various settings and their affect on how fast we can put through the processing of frames and writing it to a file at the same time.

I will be addressing most of the settings in the h.264/AVC codec, but not all of them. I will be concerned mainly with the ones that will slow down processing, so that things do not take too long and fall behind and cause ‘lag’, both in the game and the resulting video file itself. This differs from compressing for archiving our own movies, because instead of being only concerned with Quality (setting everything on ‘high’ and letting it take as long as it needs), we must now balance Speed of the compression as well, being now more concerned with each of these settings and how they can possibly slow things down when recording the ‘live’ game rendering. As is the nature of live recording, we want it to easily and quickly process the frames and save them to a file. I will explain how to do all of this.

Recording with H.264/AVC

“x.264” is a free/open-source utilization of the h.264/AVC codec (the XiWave GNU GPL MPEG-4 Codec). It is normally a command-line driven executable [when you run it, you type things in, to get it to do things], so what we want for game recording with these programs, is a version with an ‘interface’ so that we can just tell our apps what to do with the mouse and buttons/sliders and it translates it into commands for the codec. All we would have to do is choose a few settings and checkboxes (what most people are used to – a nice, easy, graphical user interface).


Doing a search for ‘x264+windows’, there are a few places you can get the installer/setup program for x264 and Windows, here are the main ones:

This is the “Official” Open-Source Video For Windows version of the x264 codec (Red Logo) at the time of this writing:
http://sourceforge.net/projects/x264vfw/

This official codec is what is covered in the “Easymode” sections of this article


This is an “Unofficial” x264 Video For Windows Codec (Black Logo), at the time of this post, that allows for far more settings to be edited via checkboxes and pulldown menubars, but is more difficult to use (these two links are both the same thing):
http://www.digital-digest.com/software/x264_VFW_Codec.html
http://komisar.gin.by/index.html

This unofficial codec is what is covered in the “Hardmode” sections of this article


Basically, you can see that what we want is a “Video For Windows” version, which (thanks to all those great people that have worked on it over time!) has a nice, easy-to-use interface for picking the settings you want to use, without typing in a long line of commands every time. After installing the codec/interface into Windows, it’s just a matter of opening whatever game recording program you prefer and selecting it to use it.

Here’s how to select it for usage in these three game recording programs:

Recording with x264 and Bandicam

  • Once the codec is installed, run Bandicam and go to the Video tab and click on the Settings button
  • In here, under the Video category, next to Codec, click on the pull-down menu bar (with a little triangle at the end) and choose External Codec, which allows you to use other codecs installed in your system
  • Then, click on the three ellipsis (““) button and it will let you “Select external video codec”
  • Select the “x264vfw” H.264/MPEG-4 AVC codec from the list and click on the Configure button
  • This is the x264vfw configuration interface and in here are all the settings we will talk about next…

Recording with x264 and Dxtory

  • Once everything is installed (Dxtory requires dotNET 4.0, a download link is on their main Download page), run Dxtory and click on the Movie settings button (which shows a little handy-cam with it’s lcd screen hanging out the side)
  • Under the Video Codec category, next to the word Codec, click the pull-down menu bar (with a little triangle at the end) and choose “x264vfw” H.264/MPEG-4 AVC Codec from the list and click on the little pen icon/button to the right, which opens the Configuration dialog box of the codec
  • This is the x264vfw configuration interface and in here are all the settings we will talk about next…

Recording with x264 and MSI Afterburner

  • Once the codec is installed, run MSI Afterburner and click on the Settings button at the bottom 
  • In here, go to the Video Capture tab and under the Video Capture Properties category, click on the pull-down menu bar (with a little triangle at the end) and choose “VFW compression”, which allows you to use the other codecs installed in your system
  • Then, click on the three ellipsis (““) button and under Compressor, click on the pull-down menu bar (with the little black triangle at the end) and choose “x264vfw” H.264/AVC codec from the list and then click on the Configure button to the right
  • This is the x264vfw configuration interface and in here are all the settings we will talk about next…
» Note:  To record with x264/h264/AVC and have it easily-importable and recognized properly in NLE’s (Non-Linear video Editing applications, such as Sony’s Vegas and Adobe’s Premiere lines of products [for example]) without having glitches or corruption or other problems, one setting for MPEG-4 codecs must be changed from the Default Setting right from the start. I created a video example of how to change this setting in Bandicam, Dxtory and MSI’s Afterburner and the post with that video can be found here at this blog:
http://gametipsandmore.blogspot.ca/2013/06/and-more-how-to-record-with.html
To understand some of the concepts and settings utilized by this codec (and helpful information to know for game recording and video compression in general), a quick word on Bitrate:

[This section is highlighted in green headings for navigation, to assist you whether you are re-reading this article or you feel you know a lot about bitrate in video editing and wish to skip it]

Bitrate (in Layman’s Terms)  /start

When talking about game recording, bitrate is an expression of the amount of data we are using to create the recorded file [literally, how many bits of information we are using]. It is usually expressed as how much information per second we are telling the codec to use, to represent the frames that are getting pushed through, and save them to our output video file.
The main thing to remember is that More Bitrate = Bigger Filesize

For example, if we record using a 1MB per second (1MB/s) setting, then after 2 minutes of recording (120s), our recorded file size will be 120MB. At that bitrate, if we recorded for one hour straight (3600 seconds), our recorded file size will be 3600MB (3.6GB).
If we record using a larger amount, let’s say 2MB per second (2MB/s), then after 2 minutes of recording (120s), our recorded file size will be 240MB. At that bitrate, if we recorded for one hour straight (3600 seconds), our recorded file size will be 7200MB (7.2GB).
It’s that simple. The more bitrate we use, the bigger the recorded file will be. 

For those used to video compression and editing, or even general users of multimedia, you may be more familiar with data rates in the realm of:

MP3 (MPEG-3 audio) song bitrates such as: 128kbps, 192kbps, 320kbps
PSP (PlayStation Portable) video bitrates such as: 768kbps, 1500kbps
DVD (MPEG-2) bitrates such as: 8000kbps, 9800kbps
Blu-Ray/HD bitrates such as: 16000kbps, 25000kbps, 50000kbps

All of these are usually expressed as Megabits/Kilobits/bits over time (in seconds), hence the “ps” at the end.
eg. 16 Mbps = 16,000 kbps = 16,000,000 bps (bits per second)

~bits (lower-case ‘b’) and Bytes (upper-case ‘B’) are different~

There are 8 bits (lower-case ‘b’) in 1 Byte (upper-case ‘B’)
8 bits in 1 Byte
8000 bits = 8 kilobits (‘kilo’, which is 1000 Bytes) = 1 KiloByte
8000 kilobits = 8 megabits (‘mega’, which is 1000 KiloBytes) = 1 MegaByte 

For example, if you were rendering out a movie to upload to YouTube and you chose an output bitrate of “8000 kbps” in your editing/compression application, that is 8 Mbps (bits, lower-case ‘b’), which means 8 Megabits per second. Converting that into Bytes (upper-case ‘B’), means that video will be running at 1 MBps, which is 1 MegaByte per second (upper-case ‘b’). 

At that bitrate (1MB/s), it is the same bitrate as our example above [just under where it says “More Bitrate = Bigger Filesize”] and it will take up roughly 60MB of space on your hard drive every minute of recording. Thus is the interaction between Bitrate and File Size and how to convert between the two. The higher the bitrate setting used, the bigger the output file size will be (the recording). 

There is one other formula to remember: More Bitrate = Better Quality. This formula applies to almost everything digital: video (DVD/BluRay), audio (MP3/MP4), pictures (PNG/JPG), any multimedia that is digital. If you allow/use more bitrate, the picture/music/video is represented better [or to be more precise, closer to the original input] because there are literally more bits used to create the picture/sound/etc.

Quick example – think of a square that is divided up into 9 sections. Now pretend it is trying to ‘represent’ a painting, any painting you can think of. With only 9 blocks of data available (each one can only be a certain color), then it would look like nothing but some colored blocks and barely look like the painting at all. Now, imagine a square divided up into 80 sections. Pretend it is trying to represent the same painting. Even though it will be ‘blocky’ still, if each section can be only one color, it will still look ‘more like the original’ than the 9-sectioned block, right? 

That’s the interaction of bitrate and quality.

Which means, for digital compression, it is essentially a ‘balancing act’ between Quality and File Size, with Bitrate being the tool to measure with. Do you want a high-quality output? Then turn up the bitrate and you’ll end up with a large file size. Do you want a small file size? Then lower the bitrate and you’ll get lower quality as well. That’s the essence of bitrate, in a nutshell.

Bitrate (in Layman’s Terms)  /end



The x264 Interface and Configuration in “Easymode”
(The Official interface with red x264 logo)

With the official version of the interface for using the x264 codec (“x264vfw”), there is only one screen, with pulldown bars to adjust most settings.
The Basic Section

To start with, under the Basic category, there is a Preset setting. This is a very handy setting, which makes many of the more obscure/hidden choices within this codec (there are dozens, behind the scenes) easy to configure. By clicking on the question mark near the bottom right corner (“?”), you can see the intimate details of the different Profiles and Presets that can be selected in these pull-down menu bars within this first “Basic” section of the interface.

For game recording, we are more concerned with speed. We don’t want the codec to break out it’s magnifying glass and scrutinize each frame coming through in strict detail, because that would cause it to slow down, which will cause it to ‘lag’ behind, not only in the game, but in the recorded file itself as well (“choppy-ness”). 
So, the first thing to do, when using this codec for ‘live’ game recording, is to change the Preset setting from it’s original default of Medium to “Ultrafast“. This is the fastest option for this setting.
The other options, such as Superfast, can also be used, but be aware that the more you go down the selections available, the more options are being ‘turned on’ behind-the-scenes with this codec, and while some of them do help apparent quality of the video, they are geared more towards a slow, steady, long-term compression session (like when you might archive a video/movie) with high-quality settings and slow, scrutinizing analysis of the frames. While not a bad thing, for game recording, we don’t want that. We want it to save what we are seeing on the screen fast, to a file. We want speed. Feel free to take a look and learn about the various options the other Presets turn on [many of them are covered in this article further down], but for optimal speed, Ultrafast is the setting to use.
The next pull-down set of options to choose from is Tuning. These are also a set of pre-selected options that, depending on which one you choose here, will enable or disable certain functions in the codec. These choices are helpful is easily fine-tuning the codec to compress a movie/video/clip of each certain type, as it enables options in the background that will help with efficient, detail-oriented compression of that certain type of material. 
For game recording, again we are more concerned with speed. These options, while helpful in a slow, ‘leave-it-overnight’ compression session of clips or movies of ours we want to save; for live game recording we want to leave it at it’s default setting of “None“, so that the codec keeps it’s magnifying glass put away and doesn’t spend any extra time analyzing the frames coming through.
There are two checkboxes below these first two pull-down menus and they are titled “Fast Decode” and “Zero Latency“:
Fast Decode turns off a few options [behind the scenes] that help by reducing the processing ‘load’ of the video stream, such as CABAC and Deblocking [these are explained in more detail further within this article]. These are options that help keep some quality (especially at lower bitrates), but as the name proclaims [“Fast”], for optimal speed of recording we want this option “Checked“, to enable it (which will turn off these extra options for now).
Zero Latency also turns off a few options behind the scenes, ones that increase compression time, such as B-frames [explained later in this post] and how far to ‘look ahead’ at frames coming in, for analysis. Since we want speed for recording our game footage and less analysis [remember, more analysis slows things down], we want this option “Checked” to turn off the extra options that are ‘behind-the-scenes’ with this setting.

The rest of the settings in this Basic section of the interface need not be adjusted for game recording, but a good Wikipedia page, talking about the various Profiles and Levels and their capabilities can be found here:
http://en.wikipedia.org/wiki/H.264/MPEG-4_AVC

The Rate Control Section

All of the below paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

The main thing in here (and really the only thing to adjust for game recording in this tab) is the longest bar right in the middle, the main datarate control and compression decision to make, is all in that one bar. I cannot even make a suggestion on what to use [ok, I can actually], since it will partially depend on what type of game you are recording, your hardware, what kind of compression you are looking for and many other factors. I will attempt to simplify it however and give a suggestion at the end. (More importantly for game recording, there is one choice that is slightly faster than all the others).

To begin, since we are going to be using x264 for game recording, we cannot use the Leeloo Dallas Multipass Options. Multiple passes (usually 2 or 3) when compressing/archiving video can greatly increase quality, but that means 2-3 times the analysis, double-checking and then further compression by the codec. Literally processing every frame twice (for 2-passes for example). That’s great when we want to keep a movie in a small, ‘as-good/high-as-we-can-get’ quality, forever. When recording games however, we want [one guess] speed. We can only accept “Single pass” as our option, because we just want the codec to see what frames are coming in, take a quick glance, and compress them into our output video file. One pass.
Starting with ABR (Average BitRate), the “bitrate-based” setting, this setting allows you to punch in the average bitrate you want to record at and it attempts to stick with it (it will go lower, but try to never go higher than what you set here). This setting basically tells the codec, “Keep within this bitrate, I don’t care if the quality goes down”, because as the bitrate ceiling is reached, it will quickly degrade in quality, as more/high movement occurs on the screen/frame. It is good for keeping within a certain file size, if that is your desire, but it also causes a bit of ‘lag’ and is not seemingly optimized for ‘live’ capturing.
CQP (Constant Quantizer Parameter) is a setting where you are basically telling the codec, “Keep this level of Quality”, and it will do it’s best to keep that level of quality for all frames/scenes. However, it will spend more time (and bitrate) on fast-motion/high-action scenes. This is good if you want to keep a movie visible clearly when a lot of things are going on, but it will also result in the higher usage of bitrate, which means larger file sizes. This may sound like a good thing for game recording (and for quality, it is), but the time spent analyzing the faster-motion scenes means that it is actually slowing down (in terms of the codec breaking out it’s magnifying glass and scrutinizing the frames that are passing by), which results in ‘lag’, both in the game and in the recorded video file itself (“choppiness” on playback).
Lossless should attempt to lose no quality, processing only very little and passing all of that nice detail directly to the recorded video output. While sounding good in theory, in practice the utilization of ‘lossless’ in x264 must be geared towards slow, analyzed video compression and not ‘as fast as we can get to avoid lag’ “live” game recording, because the result of this setting [at this time] is actually a lossy, compressed (it does not seem to go far beyond 100,000kbps), low bitrate (compared to ‘true loss-less compression’ which is much higher) capture. It does look decent, but it is also very demanding on the system and causes a large framerate drop for the level of detail that should be coming out of it [and doesn’t]. This codec does not seem to be optimized for lossless recording at this time and I do not suggest using the Lossless setting here.
CRF (Constant Rate Factor) is sort of a combination of ABR and CQP. At any given rate factor, a certain bitrate is maintained, and when the motion on the screen goes very high and the bitrate gets too high to represent what is occurring in the frame (or hits the ‘ceiling’ bitrate that it is restricted to, which can be set), then the quality begins to suffer, as the codec ramps quality down and compresses the fast-moving (“not as easy for the human eye to see”) material, until things settle down on the screen and there is slower motion (such as a person walking). Then the quality ramps back up (the bitrate staying with the specified parameters) to keep the apparent quality high to the human eye. This is how CRF is supposed to work, and it seems to do a good job of that. 
Game recording with CRF isn’t as cut-and-dry as slow, long-term video compression/archiving with CRF, where it has time to figure out how to compress the fast/blurry scenes and make the slower/clearer scenes look better and change the bitrate/quantization respectively. Quantization can be thought of as ‘apparent spoilage’ of the material, where a certain amount isn’t even noticeable to most humans, and in some fast-moving-high-action scenes, it is even preferable to some eyes. Low bitrate and/or high quantization would both result in loss of detail and ‘blurring’ or ‘smoothing’ of video most of the time and can result in compression artifacts such as Macroblocks and Gibbs Effects (“mosquito noise”), as the codec tries to decide ‘what to keep’ and ‘what to lose’ (lossy compression). With CRF, it usually will try to keep a slow-moving scene (someone walking, people talking) detailed, without much quantizing (‘spoilage’), so that it looks good. It will take high-motion (fast action, fast changing) scenes and quantize them more (smoothing, blurring, ‘spoiling’) since the human eye won’t notice it as much on fast-motion, already-slightly-blurred changes on the screen.
To summarize the differences between the types of data rate controls (the choices in this pulldown bar):
CQP is like stating, “Keep this quality, I don’t care how big the bitrate/file gets” and ABR is like stating, “Keep this bitrate/filesize, I don’t care how crappy you have to make the video look to stay within that”, CRF is more like stating, “Try to keep this bitrate, but change it a little as you need (within a certain amount) and make the video look slightly crappy if you need to as well, but don’t let either one get too out of wack”. As CRF seemed to also be the one with the least amount of effect of the system in the form of ‘lag’ [only slightly less than the other ones in testing], being so highly configurable (compared to the other choices, where you can state a bitrate to stay within and it adjusts itself), I suggest using CRF for your x264/AVC game capturing.

Some Data / Bitrates seen with CRF

Since it looks like we are going to be sticking with CRF as our main datarate control factor [it performs slightly better than the other choices in tests], here’s an example of some bitrates that can result from using it (in kilobits per second):

Recorded game: Hitman: Absolution Benchmark [grainy, panning, high and low motion areas]
Recorded codec: H.264/AVC (MPEG-4 Part 10) using the x264vfw interface
Recorded settings [some]: No Deblocking, No Max Bitrate, No CABAC, adjusting only CRF

CRF 51  ~1200 kbps (lowest possible quality setting for CRF)
CRF 42  ~1600 kbps
CRF 32  ~6000 kbps
CRF 29  ~8500 kbps
CRF 26  ~14000 kbps
CRF 23  ~22000 kbps (codec default setting for CRF)
CRF 22  ~23000 kbps
CRF 21  ~32000 kbps
CRF 18  ~45000 kbps
CRF 15  ~64000 kbps
CRF 13  ~79000 kbps
CRF 10  ~101,000 kbps
CRF 5    ~119,000 kbps
CRF 1    ~119,000 kbps (highest possible quality setting for CRF)

As you can see, the higher the CRF, the lower the bitrate, so the lower the recorded file size will be (but also the lower the apparent quality). If you desire a higher-quality recording, then a lower CRF is what you want (even with a very low CRF, the bitrate is nowhere near as high as say, a FRAPS or YV12 recording (which can both easily be over 500,000 kbps), but that is the nature of the codec as it tries to slightly compress everything that passes through it.

It can also be seen, that is it is not a strict/hard-and-fast rule of evenly-spaced steps, when it comes to the CRF setting and Bitrate. It cannot be easily calculated that “two steps up in CRF equals this much more bitrate”. That is partially the nature of the compression and partially what occurs using CRF as a datarate control. When there is more motion on the screen and as it changes, the datarate will change as well, to try to keep within certain bitrate/quality boundaries and still accurately represent what is occurring on the screen/in the frames. With almost any form of compression/codec, only if the recording was using a completely fixed bitrate, or recording a static picture/view, would it be easy to calculate the adjustments required for a certain bitrate change. It is built into the codecs to adjust themselves as needed.

What CRF setting to use

So, what CRF setting to use? The general rule is: the lower the CRF number, the more bitrate/quality you are allowing it to use, but the bigger the recorded file size will be.

The choice is somewhat objective, as CRF18 may look good to me to record a first-person-shooter game with (the default is CRF23), but you may not like how it looks and want to use CRF10 to keep more details that you want to see.
Someone may not like the compression artifacts they can see when recording Minecraft using CRF18 and want to turn it up to CRF15 so that it is crisper, with less ‘mosquito noise’ around the edges or corruption that they can see; but you may think it looks good enough at the default of CRF23 and leave it there like someone else may do. You see?
Those are two very different types of video/games mind you, one is dark and grainy and the other is smooth, with hard edges, like animation; but you get the point. It can vary, not only person to person, but also game to game. A few short tests is all it will take however, and you quickly will find a CRF setting that you are happy to record with. You’ll find your own balance between, what will essentially be, these considerations:

The higher the bitrate (lower CRF number) the higher the quality and file size will be
The lower the bitrate (higher CRF number) the lower the quality and file size will be

You will eventually decide, with just a couple tests, what is ‘good enough’ quality for your eyes/uploading, and what CRF to use on that game (remember the ‘balancing act’ of bitrate vs quality mentioned at the beginning?). You will also find that the quality recorded isn’t even kept, after compressing the final/edited video to upload at a video sharing site somewhere.

All of the above paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

That’s about it for the nice-and-easy one-panel official graphical interface for the x264vfw H.264/AVC codec. Just a few small changes and a decision of what quality/bitrate you would like to use and it is all ready  for you to record with whatever game recording program you prefer. Have fun with it!

What follows below, is the unofficial, more detailed, three-tabbed version of the x264vfw H.264/AVC codec interface. If this version is not installed on your system, or you do not care to use the more complicated version (you definitely don’t have to), then please skip down to the section called 
“Slash-whew-sweating-emoticon”. No version is better than the other, by the way, they both utilize the same codec, one just gives you more options to set [and I happened to install it by accident when learning about recording with the x264 codec in the beginning], that’s all.

The x264 Interface and Configuration in “Hardmode”
(The Unofficial interface with black x264 logo)

There are three main tabs in this version of the x264 Video For Windows interface: 
Main
Analysis and Encoding
Rate Control and Other
Each Tab has many different settings. We will talk about most of them – but not all of them – we are mainly concerned with the ones that will affect game capturing. I am going to be going through the Tabs in reverse order. This will help to explain the concepts in a more logical order [believe it or not].

Rate Control & Other Tab

In the ‘Rate Control and Other’ Tab, our main attention need only be on the VBV bitrate/buffer settings in the first Rate Control area. The other settings can be tweaked, but this need be the only one to change – when concerned only with game capturing – as it can dictate the final output filesize of our recording. 
Why all that math and talk about bitrate above? Because of the very first setting we are going to cover, part of the Rate Control section:

The very first setting in this third tab of the x264vfw interface is something called “VBV max bitrate” and it is expressed in “kbit/s”. Yay, we just learned about that! It means that the value typed in here will be accepted as “kilobits per second”.

What does the “VBV” mean? It stands for “Video Buffering Verifier” and this setting will let us state the overall maximum bitrate we want to restrict the video recording to be, so that it does not go over it. 
Why would we want to do that? Remember that the amount of bitrate (per second) that we are using to record with affects the output video file size. If it is a large amount, the file size will be bigger. If we wanted to restrict the recorded output file size and keep it smaller, we could put an amount in here and it will do it’s best to keep within that amount, allowing us to control how much bitrate it uses to record with (and thus control how big the game recording output will be).
So, to use our example just above, if we wanted to restrict the bitrate of the game recording output to be only 1MB/s (1 MegaBytes per second), what do we do? 
That’s right, we convert it to lower-case (small-‘b’) bits, first:
We want 1 MegaByte per second of a bitrate
1 MegaByte is 1000 KiloBytes
since 1 Byte = 8 bits
then 1000 KiloBytes = 8000 kilobits
so to restrict the maximum bitrate allowed for our capture to 1MB/s (taking up 60MB of drive space per minute of recording) we would put “8000” in the ‘VBV max bitrate’ box.
This box then, gives some control over how much diskspace you want to devote to the game recording file output. If you do not want to restrict the bitrate, do not put anything in these first two boxes on this third tab. 
If you do want to set a restriction here on the bitrate, set a “buffer size” as well (the box just below the first one). This ‘buffer size’ gives a sliding-window-view of how much the codec will keep track of what is going through and ‘watch’ to make sure that it stays below the amount in the box above (the ‘max bitrate’ box). It is used more for compressing for portable devices (which have less RAM and are not able to buffer/keep track of a large amount at a time and therefore must have a restricted amount set here).  
For our purposes – game recording – remember that we must be more concerned with speed (to reduce lag), so in this box, we cannot put a very large amount. Why? Because the larger the buffer, the more that the codec will try to ‘store up’ in RAM, in order to ‘watch it’ (process it) and keep track of how big the bitrate gets, in order to keep our restriction of the ‘max bitrate’ box on it. So, a smaller amount such as “2000” up to maybe “4000” in this ‘buffer size’ box is a good amount. The overall buffer size also allows room for the video to ‘go over slightly and come back down to within’ the amount we set, but the larger the amount is, the more data will be held behind for processing that will be done on the game recording and the slower everything will get – and we don’t want that – we want as close to ‘Lag Free’ recording as we can get. A “0” then, would be the optimal amount to put in here, when speed is a concern; but then we would not be able to set a maximum bitrate… more on this later in the article…
That’s all we will adjust on the Rate Control & Other tab.
Analysis & Encoding Tab
Here’s where we will do the most adjusting, as these settings in here are the ones with the most impact on speed and game recording.
In the Analysis section, the first few adjustments are checkboxes concerning Partitions. Partitions are exactly what they sound like: it is how much the codec will divide up the screen, into sections, so that it can analyze each section and look at what is changing, decide how to compress it, how much to compress it, and so on. For game recording, remember we are more concerned with speed, than messing with how the codec is going to scrutinize the screen, so we are going to uncheck everything in the Partitions sections. Really. We are also going to uncheck the Adaptive DCT setting (which will deselect/lock out/grey out some of the checkboxes for us).
For game recording, we are going to leave a checkmark in the “Fast P-skip” setting.

Frame Types (in Layman’s Terms)  /start

There are three main types of frames in video encoding:
I-type frames
P-type frames
B-type frames

I-frames are ‘Intra-coded Frames’, sometimes called Information Frames, because they hold the most information in a ‘group of frames’ (which is what makes up a video) and therefore I-frames take up the most space (as far as the amount of space it will take up on your hard drive). They also look the best as well, as they usually use a higher bitrate (which is why they take up the more space). They are utilized by the codec to indicate a large change in what is going on in the video/on the screen, like a sort of ‘reset’. They can usually be identified by the screen being ‘cleared up’ of blocks/glitches from video compression, as the compressed video is played back. 

For instance, if you are running down a dark hallway and turn a corner and there is an explosion, in order to more accurately represent that large change in color and motion in the game recording, the codec will most likely decide to insert at least one I-frame and use a larger amount of data to keep more detail as it tries to represent all of the huge changes going on, on the screen and in the frames.

I-frames also serve some other purposes: the ‘intra-coded’ means that they are not dependent on other frames around it in the video  [which is a collection of frames], as they hold all the information needed to represent the frame all within itself [remember ‘inter-murals’ in school involved other schools and ‘intra-murals’ was contained all within your own school, this is the same thing]. 

They also are usually used as Keyframes. Since I-frames contain all the data need to represent the entire frame, on it’s own, video applications can use it as a ‘starting point’ or ‘reference point’ (“keying off of it”) and allow for more compatible cutting/editing on them and use them to start ‘seeking’ from, when editing a video. The two main things to remember about I-frames/Keyframes [the same thing] is that (1) I-frames can stand alone all by themselves, as they have all the information needed to display an image/frame, and (2) I-frames allow video editing programs [like Sony’s VegasVideo/MovieStudio/Pro and Adobe’s Premiere/Pro] to ‘reset’ and show you where you are starting to edit from – if there are a large number of frames between these I-frames (“keyframes”), it will take longer for the program to read between all of them and then show/allow you to start editing from where you have selected in the video editing program (it will take longer overall to edit by hand as the program starts and stops and you have to wait while editing).  

MJPEG game recordings are made up entirely of I-frames, as every frame in the captured video is it’s own JPEG compressed picture and it is the most editing-friendly and compatible codec to capture with, no matter what game capturing program you use. In fact, most video editors can read MJPEG without installing any other codecs on your system 

P-frames are called ‘Predicted Frames’. They hold far less information in a group of frames (video) and take up far less space. They actually only hold the differences from the Previous I-frame, that is, they only keep track of the changes on the screen/what has changed on the screen since the last I-frame, which is why they are far smaller than I-frames. 

For instance, if you are playing a character in a game and you are just standing at the mailbox reading an in-game message, there isn’t much changing on the screen at all. Perhaps on the side of the mail window, there is only someone running by and that is all that is happening on the screen, nothing else is moving at all. P-frames will only keep track of the movement that person running by and not keep track of the mail message or anything else going on in the frame (things that aren’t moving) and it will save only those changes to the game recorded file as P-frames. Hence, they can indeed take up a much smaller amount of space in a game recording, since they are only recording the things that are changing on the screen.

B-frames are ‘Bi-directional Frames’ (called ‘Bi-Predictive Frames’). They hold even less information than P-frames, as they are only keeping track of the differences between any frame before or after itself (even using P-frames that are around it and not needing an entire I-frame to start from). This means they are only only keeping track of very small changes (only one frame ahead or behind) and can therefore be extremely small and take up very little space in a video file. B-frames are one of the reasons why we can archive/compress movies in such small file sizes – only the differences of what is going on, on the screen/in the frames, is being kept track of. Both P and B frames help to save a ton of space when it comes to video compression.

Frame Types (in Layman’s Terms)  /end

Why all that talk about the different types of frames in a group of frames (video)? Because now we can easily understand the next few settings in the configuration window. 
Fast P-skip is a setting that allows the codec to look at P-frames and decide if there are enough changes to analyze it further, or ‘skip’ over them and just process them as they are. This is decided on by the codec when it looks at some other settings on this tab (such as the “ME” settings) but for the most part, it helps speed – our main concern with game recording – more than it helps things to ‘look good’, so we will leave a checkmark in it, as we briefly stated above.
Max frame refs and Mixed refs are talking about Reference Frames and how many to use in a group of pictures/frames. When encoding, a codec can use frames in front (P-frames) or in front and behind (B-frames) of the current frame it is working with, to keep tracks of what has changed between frames. When encoding for movies, we want as many as possible (or as many as the codec decides to put in) in order have things keep a lot of detail wherever it is needed, especially for scene changes; but for game recording, we want things to run faster (so that the game capture does not lag the game or cause lag within the recorded file (“choppy-ness” in playback), so we actually want the codec to use as little number of Reference Frames as possible.
Remember, every time the codec has to ‘think’ or analyze the frames more, it will slow down to break out it’s magnifying glass and scrutinize, so what we want for this setting is the lowest (one) Reference Frame (put a “1” in the Max frame refs box) so it doesn’t have to do much more work than just looking quickly one frame ahead or behind, when when figuring out what has changed. 
Mixed reference frames allow the codec to compress frames based on changes in frames that are also being referenced by other frames [if you can follow that]. Again, the codec is going to have to slow down and take a look, and for game recording, we want things to stay lean and mean (fast), so uncheck this bad boy (if you make the Max frame refs a “1”, it will be disabled anyway, since it does not have enough frames to deal with to look around at them anyway).
The next few settings down that all say “ME” refer to Motion Estimation. This is the process of keeping track of where things are moving on the screen and how to deal with compressing the changes it is keeping track of. For game recording, we want the codec to analyze as little as possible (so it doesn’t lag behind what is going on, on the screen) so we must choose the lowest settings for all of the “ME” options. 
That means “Diamond” analysis as the ME algorithm (pulldown menu choice), an ME range of the smallest we can choose from (“4”) and the lowest amount of Subpixel ME refinement we can have (“0” or no subpixel refinement). Remember, we want the codec to just save what is happening on the screen and analyze as little as possible, so it doesn’t fall behind.
With the choices above, Chroma ME and the Psycho-visual Rate Distortion Optimization strength will be locked out/not applicable, which is good for game capturing, as it scrutinizes the frames that are coming from the game even less.
The next couple settings, in the middle column of the tab, that say GOP in them, are talking about the size of the Group Of Pictures we want in our capture. If you can recall the things we have already said about how a codec decides to compress frames, it looks to frames ahead and behind at times, looking at the differences between them, and then decides how to compress the frames based on what it finds (and the settings we set). For movie compression, we want a large number, so that the codec mainly keeps track of the differences only between frames, as much as it can, and a large GOP size allows it a lot of ‘room to move’ and look around. For game capturing, we don’t want it to be quite as big, as the more frames on it’s plate it has to deal with, the more it will slow down and take time to decide what to do with them. 

There is also a chance that some video editing applications will not like the large (or any) Groups Of Pictures and may see the video stream as corrupted or give wierd artifacts/effects when it plays it back. This is one reason why using MJPEG as a game recording codec is suggested often, as it’s built-in GOP is “1”, as evey frame is it’s own self-contained ‘group’ and no editing app has to mess with it or over-analyze it. It is the most compatible, but you can use any codec you wish, but you may have to change the codec’s Keyframes or GOP to “1” for compatibility [more on this in future articles!]


Hence, we will set a nice low number [I personally used “50” around the time of this post]. Be aware that if the number is a multiple of the framerate you are recording in, Videophiles may notice the screen ‘shifting’ or having other odd effects ‘in time with’ the framerate (eg. if recording at 60fps and the GOP size is 60, some people notice the screen ‘correcting’ or ‘shifting’ or ‘flickering’ every second, as it ends the group or frames and starts a new one every second).
You can use “1”, which will make the codec act like MJPEG in a way, but then the codec will not have any room to analyze/compare/compress anything, and the resulting file will require much more bitrate to keep detail (to accurately represent what is going on in each frame)… more on that later in this article…
Weighted P-frames and Max consecutive B-frames is yet more analysis for the codec to do (especially B-frames, which remember, is a frame that ‘looks both ways’ for changes to frames in front and behind it, therefore can slow down recording a lot). For game capturing, we gots’ta keep setting things for speed and not letting the codec analyze too much. Change the Weighted P-frames to “None” (via a pull down bar) and the B-frames to “0” if they aren’t already. This is effectively telling the codec “you ain’t got time fo’ B-framez” so the rest of the settings that say “B-frames” should be locked/greyed out after that.
[In tests, enabling B-frames would actually crash the x264vfw app]
Under the Encoding section, the last column of this tab, the first section has to do with Deblocking
Deblocking is a way to try and ‘hide’ areas where the codec has cut out detail or ‘let go of data’ (lossy) in attempts to conform to the other settings in the codec and/or compress the frames highly. I’m sure almost everyone has seen Compression Artifacts like macroblocks or Gibbs Effects (mosquito noise) in high/over-compressed video and video streams. It’s not very pretty and turning on the Deblocking filter is one way of masking these artifacts, so that the video overall looks nicer to the human eye. 
The problem with Deblocking is that the codec will smooth things out, when trying to hide artifacts (especially ones that occur with lower bitrates/quality). It can be forced to keep detail with negative values (useful for movies/games with film grain), but overall it still takes more compression time to use, as the codec stops and analyzes the frames, looking for what to Deblock. So, for game recording for the most part, for optimum speed, Deblocking should be disabled, that is, “No Checkmark” in the box for In-loop deblocking filter (which will disable the two Deblocking settings below it).

[In my own trials/experiments, I found that a low amount of deblocking (as in “1”) for these two recording settings is acceptable and helps to hide some otherwise icky-looking compression effects that occur at lower bitrates (bitrate control is covered more in the next section), but for optimum speed (it is not needed at higher bitrates anyway) and especially for older/less powerful systems, turning deblocking off will always speed things up.]
CABAC is extra analysis that can really make a difference in compressing video. Some mobile players cannot even use it though, as it requires more processing power. The optimal setting for this, as it is extra analysis/processing being done – for game recording – would be “Off” (unchecked).

 [I have successfully done many recordings with CABAC on, as it seems to have only a slight effect on recording ‘lag’ on my system; but for optimum speed/less lag when recording (and at a slight loss for keeping some quality), it should be disabled.. for speed. ]

The only other thing to adjust in this tab, when game recording, is the Trellis setting. Trellis is a way of analyzing and attempting to keep certain detail when compressing, especially at lower bitrates, but as many times already mentioned, we want speed for game recording, so set the Trellis analysis to “Off” (via a pulldown bar). 

Main Tab

All of the below paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

The main thing in here (and really the only thing to adjust for game recording in this tab) is the longest bar right in the middle, the main datarate control and compression decision make, is all in that one bar. I cannot even make a suggestion on what to use [ok, I can actually], since it will partially depend on what type of game you are recording, your hardware, what kind of compression you are looking for and many other factors. I will attempt to simplify it however and give a suggestion at the end. (More importantly for game recording, there is one choice that is slightly faster than all the others).

To begin, since we are going to be using x264 for game recording, we cannot use the Leeloo Dallas Multipass Options. Multiple passes (usually 2 or 3) when compressing/archiving video can greatly increase quality, but that means twice the analysis, double-checking and then further compression by the codec. Literally processing every frame twice (for 2-passes). That’s great when we want to keep a movie in a small, ‘as-good/high-as-we-can-get’ quality, forever. When recording games however, we want [one guess] speed [I just realized this whole article can be it’s own drinking game]. We can only accept “Single pass” as our option, because we just want the codec to see what frames are coming in, take a quick glance, and compress them into our output video file. One pass.
Starting with ABR (Average BitRate), the “bitrate-based” setting, this setting allows you to punch in the average bitrate you want to record at and it attempts to stick with it (it will go lower, but try to never go higher than what you set here). This setting basically tells the codec, “Keep within this bitrate, I don’t care if the quality goes down”, because as the bitrate ceiling is reached, it will quickly degrade in quality, as more/high movement occurs on the screen/frame. It is good for keeping within a certain file size, if that is your desire, but it also causes a bit of ‘lag’ and is not seemingly optimized for ‘live’ capturing.
CQP (Constant Quantizer Parameter) is a setting where you are basically telling the codec, “Keep this level of Quality”, and it will do it’s best to keep that level of quality for all frames/scenes. However, it will spend more time (and bitrate) on fast-motion/high-action scenes. This is good if you want to keep a movie visible clearly when a lot of things are going on [I hate watching a low-quality video stream online and it goes absolutely-stupid blurry at high-motion scenes just because there are many things happening on the screen], but it will also result in the higher usage of bitrate, which means larger file sizes. This may sound like a good thing for game recording (and for quality, it is), but the time spend analyzing the faster-motion scenes means that it is actually slowing down (in terms of the codec breaking out it’s magnifying glass and scrutinizing the frames that are passing by), which results in ‘lag’, both in the game and in the recorded video file itself (“choppiness” on playback).
Lossless should attempt to lose no quality, processing only very little and passing all of that nice detail directly to the recorded video output. While sounding good in theory, in practice the utilization of ‘lossless’ in x264 must be geared towards slow, analyzed video compression and not ‘as fast as we can get to avoid lag’ “live” game recording. The result is actually a lossy, compressed (it does not seem to go far beyond 100,000kbps), low bitrate (compared to ‘true loss-less compression’) capture. It does look decent, but it is also very demanding on the system and causes a large framerate drop for the level of detail that should be coming out of it (and doesn’t). This codec does not seem to be optimized for lossless recording at this time and I do not suggest using the Lossless setting here.
CRF (Constant Rate Factor) is sort of a combination of ABR and CQP. At any given rate factor, a certain bitrate is maintained, and when the motion on the screen goes very high and the bitrate gets too high to represent what is occurring in the frame (or hits the ‘ceiling’ bitrate that it is restricted to, which can be set), then the quality begins to suffer, as the codec ramps it down and compresses the fast-moving (“not as easy for the human eye to see”) material, until things settle down on the screen and there is slower motion (such as a person walking). Then the quality ramps back up (the bitrate staying with the specified parameters) to keep the apparent quality high to the human eye. This is how CRF is supposed to work, and it seems to do a good job of that. 
Game recording with CRF isn’t as cut-and-dry as slow, long-term video compression with CRF, where it has time to figure out how to compress the fast/blurry scenes and make the slower/clearer scenes look better and change the bitrate/quantization respectively. Quantization can be thought of as ‘apparent spoilage’ of the material, where a certain amount isn’t even noticeable to most humans, and in some fast-moving-high-action scenes, it is even preferable to some eyes. Low bitrate and/or high quantization would both result in loss of detail and ‘blurring’ or ‘smoothing’ of video most of the time and can result in compression artifacts such as Macroblocks and Gibbs Effects (“mosquito noise”), as the codec tries to decide ‘what to keep’ and ‘what to lose’ (lossy compression). With CRF, it usually will try to keep a slow-moving scene (someone walking, people talking) detailed, without much quantizing (‘spoilage’), so that it looks good. It will take high-motion (fast action, fast changing) scenes and quantize them more (smoothing, blurring, ‘spoiling’) since the human eye won’t notice it as much on fast-motion, already-slightly-blurred changes on the screen.
To summarize the differences between the types of data rate controls (the choices in this pulldown bar):
CQP is like stating, “Keep this quality, I don’t care how big the bitrate/file gets” and ABR is like stating, “Keep this bitrate/filesize, I don’t care how crappy you have to make the video look to stay within that”, CRF is more like stating, “Try to keep this bitrate, but change it a little as you need (within a certain amount) and make the video look slightly crappy if you need to as well, but don’t let either one get too out of wack”. As CRF seemed to also be the one with the least amount of effect of the system in the form of ‘lag’ [only slightly less than the other ones in testing], being so highly configurable (compared to the other choices, where you can state a bitrate to stay within and it adjusts itself), I suggest using CRF for your x264/AVC game capturing.

Some Data / Bitrates seen with CRF

Since it looks like we are going to be sticking with CRF as our main datarate control factor [it performs slightly better than the other choices in tests], here’s an example of some bitrates that can result from using it (in kilobits per second):

Recorded game: Hitman: Absolution Benchmark [grainy, panning, high and low motion areas]
Recorded codec: H.264/AVC (MPEG-4 Part 10) using the x264vfw interface
Recorded settings [some]: No Deblocking, No Max Bitrate, No CABAC, adjusting only CRF

CRF 51  ~1200 kbps (lowest possible quality setting for CRF)
CRF 42  ~1600 kbps
CRF 32  ~6000 kbps
CRF 29  ~8500 kbps
CRF 26  ~14000 kbps
CRF 23  ~22000 kbps (codec default setting for CRF)
CRF 22  ~23000 kbps
CRF 21  ~32000 kbps
CRF 18  ~45000 kbps
CRF 15  ~64000 kbps
CRF 13  ~79000 kbps
CRF 10  ~101,000 kbps
CRF 5    ~119,000 kbps
CRF 1    ~119,000 kbps (highest possible quality setting for CRF)

As you can see, the higher the CRF, the lower the bitrate, so the lower the recorded file size will be (but also the lower the apparent quality). If you desire a higher-quality recording, then a lower CRF is what you want (even with a very low CRF, the bitrate is nowhere near as high as say, a FRAPS or YV12 recording (which can both easily be over 500,000 kbps), but that is the nature of the codec as it tries to slightly compress everything that passes through it.

It can also be seen, that is it is not a strict/hard-and-fast rule of evenly-spaced steps, when it comes to the CRF setting and Bitrate. It cannot be easily calculated that “two steps up in CRF equals this much more bitrate”. That is partially the nature of the compression and partially what occurs using CRF as a datarate control. When there is more motion on the screen and as it changes, the datarate will change as well, to try to keep within certain bitrate/quality boundaries and still accurately represent what is occurring on the screen/in the frames. With almost any form of compression/codec, only if the recording was using a completely fixed bitrate, or recording a static picture/view, would it be easy to calculate the adjustments required for a certain bitrate change. It is built into the codecs to adjust themselves as needed.

What CRF setting to use

So, what CRF setting to use? The general rule is: the lower the CRF number, the more bitrate/quality you are allowing it to use, but the bigger the recorded file size will be.

The choice is somewhat objective, as CRF18 may look good to me to record a first-person-shooter game with (the default is CRF23), but you may not like how it looks and want to use CRF10 to keep more details that you want to see.
Someone may not like the compression artifacts they can see when recording Minecraft using CRF18 and want to turn it up to CRF15 so that it is crisper, with less ‘mosquito noise’ around the edges or corruption that they can see; but you may think it looks good enough at the default of CRF23 and leave it there like someone else may do. You see?
Those are two very different types of video/games mind you, one is dark and grainy and the other is smooth, with hard edges, like animation; but you get the point. It can vary, not only person to person, but also game to game. A few short tests is all it will take however, and you quickly will find a CRF setting that you are happy to record with. You’ll find your own balance between, what will essentially be, these considerations:

The higher the bitrate (lower CRF number) the higher the quality and file size will be
The lower the bitrate (higher CRF number) the lower the quality and file size will be

You will eventually decide, with just a couple tests, what is ‘good enough’ quality for your eyes/uploading, and what CRF to use on that game (remember the ‘balancing act’ of bitrate vs quality mentioned at the beginning?). You will also find that the quality recorded isn’t even kept, after compressing the final/edited video to upload at a video sharing site somewhere.

All of the above paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

Slash-whew-sweating-emoticon

That was a lot to take in at once – but you made it through – and now you are set to record using H.264/AVC, whether you prefer Dxtory, Bandicam or use the completely free-to-use Afterburner from MSI. You are also now knowledgeable in both the Official and an Unofficial version of the x264 Video For Windows graphical way of setting up the codec, to change the settings.

Other than the Rate Control setting above (CRF) which you can adjust and set how you want it, the rest of the settings I have personally tested and found which ones allow for the faster recording performance and which ones negatively affect the speed of recording, utilizing the x264vfw interface (which these programs use to record in H.264/AVC). Turning off/down the ones I have stated throughout the article should give you the fastest/closest to ‘lag-free’ recording you can get with this codec, while still taking advantage of it’s compression capability. [My own Personal Notes/Opinions/Settings are below]

Please note that if your system is older or not as capable (perhaps you have a notebook/laptop which has less capability than a full desktop system with it’s own dedicated videocard and soundcard), you may have to do things like lower the recording resolution (or the resolution you are playing at in the game), increase the CRF number (so that it uses slightly less system resources to process the recording and will then use less bitrate and less disk space).

There are many things that can be done to help with speed, make for smoother recording, less lag, etc.
Here is a link to an article I wrote earlier on this blog, with general Tips to help with game recording:
http://gametipsandmore.blogspot.ca/2012/05/tips-for-game-recording-currently-text.html
No matter what game you play or what program you are using to record, these Tips will help you overall, with trying to record your games.

Lastly, please note dear reader, that I am not saying “This codec is the best one to record with” or “use this one only”. I am merely showing that it is possible or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you will. 

As always, do some of your own testing, see what works the best for you on your system and get things looking exactly how you want them to look – and have fun with it!


Personal Short Version/Opinion
and 
Settings I use:

H.264/AVC (MPEG-4 Part 10), is not normally a recommended codec to record with, for most people. It does not have the capability of super-high-almost-what-you-see-is-what-you-get quality that other codecs like FRAPS1, YV12, Lagarith or RGB Raw would give you. 
Heck, the highest bitrate possible (using the CRF setting, the fastest of the Rate Control settings in my tests) is only about 100,000kbps. That’s still about 2-4x the bitrate of the average BluRay movie mind you, and it seems fine to me, to look at the recorded videos of it.

Even if I had Terabytes of hard drive space to record to, I would still like to record in as small a filesize as I can, attempting at the same time to keep ‘good enough’ quality. Gone for me, are the days of filling my drives with FRAPS recordings (which have very high quality though) when today, with the more powerful CPUs and GPUs, I can record in a high MJPEG setting (for compatibility with editing apps) or a high MPEG-1 setting (which saves a lot on diskspace as well and has decent compatibility with video editors) – and now I can save even more space and record with MPEG-4 AVC, if desired. 
For instance, on my older system, a dual-core cpu with an NVIDIA GTS250, recording with x264/AVC brings my framerate down by about ten frames per second and sometimes more. On my newer system, a six-core cpu with an AMD HD 6870, recording with x264/AVC, with the same settings, brings my framerate down by only a couple of frames per second with my settings. Wonderful stuff.

I did many, many tests to find out what specific settings made differences (especially with the Unofficial version of the interface) and for the most part, it turned out as intuitive as it seemed at the outset: any setting that increased analysis and processing of the frames slowed things down. 
I had to test it all of course, and I found many settings that didn’t make a ‘huge’ impact on performance, and with more powerful hardware these are able to be used and enjoyed, helping to compress the frames even further, keeping decent detail and resulting in a very small recorded file size. As you can adjust/optimize settings far more in the Unofficial interface (at least a bit easier/graphically), I tend to use that one more than the Official version; but in essence, both are the same thing. Here’s some of my findings [my settings are in these square brackets]:

For the Official (“Simple”, red x264 logo) interface:

I found that, on a more modern desktop system, the Preset can be turned ‘down’ a bit (the amount of analysis going up a bit), to Superfast or even sometimes Veryfast, since many of the hard-cpu-hitting options like Trellis and larger Motion Estimations don’t kick in at these settings. Anything lower/slower than that makes it lag behind too much as it processes frames.
[I usually use Superfast]

While Zero Latency is pretty much required for live game recording, Fast Decode is not entirely needed, especially if you have a faster rig to power the game and record at the same time on. My computer isn’t even top of the line but it can handle NOT using Fast Decode (which disables CABAC, and a couple other things). CABAC can have quite a bit of an effect on quality, and since it doesn’t seem to have a huge performance hit, I use it. Fast Decode also disables Deblocking and that leads into my next setting…
[I always use Zero Latency]
[Even though it helps with speed, most of the time I don’t use Fast Decode]

The only other thing I change in the interface is deciding on the main Rate Control type and Rate Factor. In my own tests, CRF seemed to have the least amount of effect on framerate out of them all, and I fluctuate on what CRF I use, depending on the game I’m recording and what the recording is for. If I’m recording a high-quality test, of course it will be a low CRF, but it need not be a 1 to look good. I am quite satisfied with a CRF of 15-18 for decent-quality captures. The bitrate of a 1080p capture at that CRF ran about 45,000kbps, which is a high-quality BluRay movie’s bitrate. For just average gameplay for fun, I usually run a CRF of 21 up to 23. The quality is ‘good enough’ then, especially with a low Deblocking setting helping out (the Preset of Superfast leaves Deblocking “On” at the default 0:0 setting). I don’t recommend going below CRF23, with deblocking or not, as it just becomes too ‘garble-y’, to use a more technical term… Web broswer/low-motion games or hard-edged/animated games that look like Minecraft also need a higher bitrate (lower CRF), so that the hard edges aren’t messed up and the smooth/flat areas aren’t too compressed and get ‘blocky’.
[I use a CRF in the range of 18 for higher-quality capturing, going up to 23 if disk space is low, and don’t suggest higher than 23, so that quality doesn’t suffer too much] 

Nothing else need be adjusted in the Official x264/red logo interface, but I sometimes add “–keyint 50” or “–keyint 20” into the area (no quotation marks) ‘for advanced users’ at the bottom. This is a command that will force a keyframe/I-frame after that many frames have gone by. This helps to keep the seeking time low when editing and allows for closer cuts when not recompressing the clip when editing. If you having a problem with editing MPEG-4/AVC files, try using a –keyint setting of “1”, so that every frame is an editable/seekable keyframe. A higher GOP is better for file size but can take longer to seek when editing and Vegas or Premiere might have ‘trails’ or ‘corruption’ so might need a GOP setting of 1, see here for more info). You may want to increase the bitrate to keep quality then though, as the codec can’t really compress/do much of it’s ‘magic’ then, without room to work between frames. As stated above, the optimal codec for editing is MJPEG, but many do not like the quality (try turning it up to 100%).
Leaving it blank and not using any “–keyint” command will allow the codec to use many more frames (250 is the default I believe) for compression and the resulting recorded file size will be very small.

For the Unofficial (“Complicated”, black x264 logo) interface:

The first tab is just the Rate Control setting. CRF seemed to have the least effect on framerate.
I also sometimes add the –keyint setting to the command box at the bottom, just like I talked about a couple paragraphs up.
[I use a CRF in the range of 18 or less for higher-quality capturing, going up to 21 or if disk space is low, up to 23 at the most and don’t suggest higher than 23, so that quality doesn’t suffer too much]

For the second tab, there is a lot to change, but I mainly talked about why up in the article, so I’ll just state what I like to use here, after this paragraph on Deblocking:

Deblocking can be forced to ‘leave things in’/keep details, by using a negative value, especially when dealing with effects such as film grain and minute details and noise; but for the most part deblocking will ‘smooth things out’, especially trying to hide where a lot of detail has been lost, where compression artifacts like Macroblocks and Gibbs Effects (mosquito noise) around edges would show up. I don’t recommend putting deblocking up too high though, as it can really make things downright blurry. With deblocking completely off, all of the detail is kept, but many things can look like they have a ‘wood grain’ pattern on them. With a high bitrate/low CRF, there is no need for deblocking at all anyway, as there would be a lot less compression/artifacting. When recording a high-quality test or something like that, I leave it off. When just recording random gameplay or myself doing something, I turn it on at a low setting, to help with keeping things looking slightly more ‘clean’.
[I use Deblocking at 1:0 (CUDA default) up to 3:0, when I use it, but any more and things start to look ‘too smoothed out’ to me]

For this second tab then:
[No Partitions (all unchecked, Fast P-skip checked, 1 Max reference frame, ME algorithm on Diamond, ME range of 4, Subpixel ME refinement of 0 or 1 (any higher causes more lag), GOP size of 20 or 50 (this is the –keyint setting from above, higher is better for file size but can take longer to seek when editing and Vegas or Premiere might have ‘trails’ or ‘corruption’ so might need a GOP setting of 1, see here for more info), No Weighted P-frames, Max consecutive B-frames to 0 (none), In-loop deblocking filter unchecked (off) or checked (on) with a 1:1 deblock, CABAC on (it’s slower for less-capable systems), DCT decimation checked (on), Trellis set to Off]

In the third and last tab of the Unofficial (black x264 logo) interface, I sometimes set a VBV max bitrate of about 40000 (kbps) just to keep the filesize down, especially when I’m going to edit and recompress for uploading somewhere (which usually gets rendered out for upload at that bitrate or lower anyway), it looks ‘good enough’ for me (this also requires a buffer of some sort, to allow it to check the bitrate as it goes up and down, so I put in 4000 or 10000 if I set a VBV max bitrate)
[No maxbitrate usually, unless you want to save some harddrive space (eg. 50000k)]

That’s all I change for both of those interfaces, from their defaults, as of the time of this post. 
Keep in mind that as games are updated and Re-Optimized, drivers are Updated, and new hardware is released/purchased, I may change these settings (and I advise you to try some tests too, if you wish, when things change). Also, I am not a stickler for the utmost quality and don’t mind things getting compressed a bit, so you might want tighter/higher settings. 
Mainly, I hope that this info helps some of you to either record with less lag (many people report that with more optimized MPEG-4/AVC settings they have less apparent lag) or just learned some terms and concepts that may help when editing and compressing your own videos/shows/etc and overall just help you record better/smoother. I actually enjoyed testing all of these things out and learning about it and I hope it helps anyone that is recording their gameplay adventures.


See you in the games!

The 2017 Extra Life 24-Hour Gaming Marathon, In Support of The Children’s Miracle Network Hospitals [Post Updated All Weekend]

Wow, it’s that time again – time to try to play some games for a cause – in my case, I play as much as I can through the weekend for the Alberta Children’s Hospital Foundation (as I was born and raised in the province of Alberta, Canada).

This year actually ‘sprung up’ on me, as I haven’t been feeling well these past few weeks… I have had a bit of a fever [38C/100F+]  the entire time and have been extra sore and slow (I say ‘extra’ as I myself have a condition, called Myalgic Encephalomyelitis – which is basically an infection of the brain and spine that causes Fibromyalgia and Chronic Fatigue symptoms (pain and tiredness, respectively) – a condition I have had for 12 years now [wow it’s been that long]). So, playing for this charity every year is special to me and something I have tried to do every since I heard of Extra Life back in 2015.

Image Link to The Extra Life main website, where you can see all of the other wonderful people participating in this event, many of them streaming their marathon Live on Twitch and other streaming sites! (Link opens in a new window)

Due to my own illness then, I cannot play 24 hours straight through, but I count my gaming hours Playing For The Kids™ over the entire weekend of the event (in this years’ case, Saturday November 4th and Sunday November 5th), hopefully tallying 24 hours in total.. (in the case that I am not ‘up to it’ for that long, I allow myself to count my wife’s gaming time, as she generously tries to play beside me and add hours, for a “Total Household Hours” amount). [I always hope that in the spirit of the event and the intention, that my dear readers and those at Extra Life find this acceptable]

As has occurred in past years, I do not have the ability/energy to set up and maintain a constant Stream of some sort yet (through Twitch, YouTube and other streaming services); but what I do is I share some details and Screenshots (and Videos if I can) of what I am able to play, here at The Blog, in an ongoing and updated post – one that I will be adding to as the weekend progresses (including Sunday Night), right here!

So, follow along with me as I Play For The Kids™ all weekend, updating this very post as I go – and if you wish to take part, you can Pledge/Donate directly to the Extra Life charity via the Logo/Image just below or through this link for 2017: https://www.extra-life.org/participant/247989 – and whether you pledge anything or not, feel free to just return to this posting for gameplay time Updates, Screenshots, some Video Clips from the weekend – and more!

See You In The Game!

Update, Saturday 12:30PM MST: Beginning The Marathon, with the initial post above and gathering snacks and drinks to start Playing For The Kids™!

Update, Saturday 7:30 PM MST: As usual with this event, I always try to play some good’ol Minecraft Hardcore Mode (you only get one life!), to see how far I can get during the marathon.

Usually, I don’t get too far and starting out this year was no exception. I spawned in a new Hardcore world – in a wintery biome which I found out later was “Cold Taiga” – which meant, although there were plenty of Trees for Wood to use, there were no seeds to find and plant right away for food, there were no large hills in sight (for easy access to Stone and Coal to cook any foods I might come across) except in the far distance – and as night fell, I died right away to a band of two skeletons and a zombie that came out from behind one of the many, many trees…. Wow what a harsh start!

I began another Hardcore world, hoping to spawn in a relatively easier biome – and I did… I quickly collected Seeds from the Grass around me and began a Garden to grow Wheat RIGHT AWAY, heh. I had to cull some of the many Pigs I found around me in order to eat, planning on replenishing their numbers later on. I then carved out a little Mud Hut in the hillside nearby and settled in for the night…

Updates on that World as I play more – but for now I have to stop and take another break. More to come!

Total Gameplay Time: ~2.0 hrs

Update, Sunday 10:30 AM MST: I played last night right up until I fell asleep, starting a “Just One Life™” character in Fallout 4 (where I stop playing and delete that character upon dying just once), and was popping into various games for short periods of time, like Marvel Heroes (which has Daily Login Rewards, with small ‘gifts’ every few days you enter the game – and a Free Hero available at the no doubt-difficult-to-get-to, Day 300) [Even if I do not have the energy to play for a while, I try to pop in to register a login, heh – to see how far I can go].

I also popped into The Elder Scrolls: Legends, a Virtual Collectible Card Game based on The Elder Scrolls series [a good game for slow-paced-yet-still-kinda-flashy-and-enjoyable gameplay that you can play against the CPU/AI only, if you desire to]. I also ran a few Benchmarks and did a few quick driving tests in Grand Theft Auto V, trying out some settings I saw in YouTube videos online (to see if I get the same framerate with the same hardware) – but I felt a bit weird at the concept of playing GTA games for this Event [shouldn’t I be playing games kids would play, or at least Family-Friendly games? lol], so I didn’t stay in Los Santos very long.
Today, I plan on playing as much as I can, continuing my Minecraft: Hardcore Mode world, and my Fallout 4 “Just One Life™” character, along with some Elder Scrolls Online gameplay, hoping to get up to 24 hours in Total. I’ll also post more Screenshots next Update. Here I go!
Total Gameplay Time: ~ 5.0 hrs


Update, Monday 9:30 AM MST: Well I played as much as I could… 
In Minecraft, I continued my Hardcore Mode world (actually Marathon 2017 World 2.0, as I died without even leaving the first Biome in the first one (above)), making a nice Garden along the shore of a River nearby…
When night fell upon the world, since I was out on a ‘walkabout’, looking around the Biome, I quickly dug into the nearest hill, making myself a small mudhut house to Craft and Cook in… I should have maybe stayed in it all night, but I thought I would get started on collecting more Food, by killing a few Spiders and using their silk to make String, crafting a Fishing Pole.. And what happened? Two Skeletons came out from behind a tree and as I ran back toward my little ‘second mud hut’, they cornered me and filled me full of arrows, as I weakly flailed my Rock Sword back and forth… I hope my ‘Deeds Will Be Remembered’ [hehe Diablo2]
To make myself feel better, I popped in an out of a few games for the next few hours… I tried out Need for Speed: Most Wanted, which seemed like an open-world racing game, with good graphics.
Playing that game reminded me of a ‘test’ I wanted to do (I love running Benchmarks and Tests, heh) with Grand Theft Auto Five (GTAV), where I saw a video of someone running it on High Settings, to test out the differences between how it performed on two different CPUs (Processors, referring to the ‘main engines’ of a computer). So I started up GTAV and ran the Benchmark (to see if I got similar results) and drove around the city a bit.
While the game looked good, I felt a little weird playing such a ‘mature’ game during a Marathon for children’s charities [lol shouldn’t I be playing ‘family friendly games’? or does it matter?], so I just took a few Screenshots (of course), and then left it for now, for something else.

The Beta for Paladins, a MOBA-slash-FPS game by the makers of Tribes:Ascend and Smite, was going on, so I popped into that game, going through the Training and playing for a while afterward.


Total Gameplay Time: ~ 10.0 hrs

Alas, just like before, I couldn’t quite make the 24 Hours on my own… My own illness [where I am sore a lot and get tired easily] keeps me from playing for very long at one time. However, as I stated earlier, what I like to do, is include the game playing time that My Better Half does alongside me, as part of a “Household Total”… If I include her generous contribution, the new total becomes:

Total Household Time: ~23.0 hrs


Haha – even with her inclusion, I did not ‘quite’ make the 24 Hours in total… But, as stated above, I hope that in the spirit of the Marathon and its’ intention – and mine – I hope that what did accrue would be acceptable… In fact; I do not think that ‘total game time’ is the main goal of this Marathon… This time is perhaps to literally ‘take time’, to think about those that are much more unfortunate than us, and in the case of this Charity, much younger than most of us… During this Day or Weekend, whichever it is, I think, we remember those out there, those that are in need. In this spirit/state-of-mind; I thank you Dear Reader, for following along in this small adventure. Whether you donated at all or not, I hope that you played a little bit of some game, took a little bit of time, to think about those that are in much more pain and need than most of us are. And I thank you for following me on this small journey. Take care, my unmet friend – and perhaps See You In The Game.

Trip to Hyderabad cont…….

Wow what an assignment! I must say that I have experienced similar assignments in the past in other sectors. However for this sector (development sector) it was a first. As a consultant you have to be on guard all the time when doing an Organization Capacity Assessment (Very similar to a “Due Diligence” in the private sector); if the client wants to mislead you, it can be done quite easily. In my case I was confronted with just that.

Things that should look out for are:

  1. Uniformity in questioners
  2. Having sets of files pre prepared for you (always ask for random files)
  3. When interviewing staff they have uniform answers or say very similar things (always ask to speak to random sample of staff and triangulate your findings; include speaking to other stakeholders as they will be a be useful source of information)
  4. Taking a long time to locate files and other documents when you request for them
  5. Key staff suddenly taking ill and not being available for interviews
  6. Acting “stupid” or not seem to understand what you are requesting for or saying

These things must be handled very diplomatically otherwise you will not be able to complete the assignment. Do not have a “knee jerk” reaction, observe very well and collect enough specific examples so that you have a basis for doubting what is presented to you. At the same time you must see if this deception is systematic or simply put up for this occasion.

If it is systemic you now have a real problem; you will not be able to decipher what is “genuine” and what is “false.” My recommendation is at this point you should seek clarifications from the person who hired you as well as speaking to the decision makers of your client. A temporary halt to the assessment will be in order to do this discretely. Suggest you take prudent steps based on your clients feedback.

However if you feel it is a put up for this particular assessment then your task is easier and it should be handled with the management of the organization that you are assessing. (Don’t forget you still need to advice your client regarding this unexpected turn of events) As this would be difficult situation for some consultants to handle; I suggest a cautious but a very direct approach. This will reduce the space for excuses by the staff. Since it will come as a surprise to them the staff of the organization you are assessing will also not be able to gang up on you to defend themselves. Make sure that you do not engage in a long dragged out discussion, be short and to the point. If handled properly it should bring about normalcy to the process.

If however you do not feel comfortable to take a direct approach you must then document both versions of the process i.e.

  1. The results that are shown by the staff of the organization
  2. Your observations and reservation of those results

This however will not be very useful in the end; as it will not provide the right results to take decisions the assessment was supposed to deliver in the first place. In some rare cases you may need to repeat the assessment to get the right results.

In my case it was the latter and I did confront the staff and the management regarding it. There was an attempt to defend the position but it was not successful; things returned to an acceptable level of normalcy and I was able to complete the assignment.

Chronic Illnesses and Diet part 1

Chronic illnesses are frequently the result of a web of interrelated factors. Your body may be reacting to a germ, an allergen or a toxin or you may be deficient in a vital nutrient. And the whole situation may be complicated by insulin resistance. It’s unrealistic to think that finding and treating just one piece of the puzzle will be sufficient to remedy the problem. Restoring balance is a more realistic approach.

Balance and Health

Balance is a key concept in most alternative medical approaches to health, such as traditional Chinese medicine, naturopathy, homeopathy and Ayurveda. One of the problems that mainstream medicine has with these alternative medical systems is that the practitioners appear to offer the same remedy for all sorts of illnesses. This doesn’t seem right to doctors trained to think that there are a certain number of discrete diseases that exist in nature. Physicians have also been taught that for each disease there is a distinct treatment. We know, for example, that if you have a strep throat or pneumonia a particular antibiotic is the right treatment, while another antibiotic is appropriate for your urinary tract infection because a different germ is involved. If you burn your finger or you break your arm, the treatment is again going to be designed for the specific problem that you have.

Diet Start

There is certainly some truth to the idea that specific illnesses or conditions need precise, individualized treatments. But there is another valid argument to be made as we move away from acute ailments to focus on the increasing prevalence of chronic illnesses. Sometimes the symptoms of a chronic illness can be suppressed with drugs, but since the cause of the disease is unknown, an individualized remedy to cure the person is out of the question. When an alternative medical practitioner recommends a generalized strategy that is not necessarily aimed at the distinct disease but is more directed at correcting imbalance, these approaches are designed to get to the underlying causes rather than the individual symptoms.

If you are in pain, it’s hard to believe in a treatment unless it works right away. Dietary changes and other generalized strategies, like the Body Clock Prescription, usually do not produce instant relief. These measures do sometimes take effect quickly, but it’s frequently a slower process. I think you will be more motivated if you understand what lies behind much chronic illness.

Rhythmic Disturbances May Underlie Many Chronic Illness

As researchers continue to elucidate the mysteries of the scientific basis of disease, we realize more and more that similar fundamental mechanisms underlie much chronic illness. These include abnormalities of cell membranes and their capacity to send and receive messages, the backfiring of chemistry designed for cellular defense (autoimmunity and inflammation) and ‘sparks’ from your own metabolic fire, environmental radiation and chemical pollutants (oxidative damage). This is why a generalized strategy to treat chronic illness is beneficial.

To this list I would add dyschronism or the failure to keep the various cadences of the body’s biochemical activities in harmony. Disharmony is the direct cause of jet lag, symptoms related to shift work and some sleep disturbances. But having your body in disharmony is also likely to bring out the worst in you more readily than if your body is well tuned. Poor tuning contributes indirectly to the expression of other illnesses, as indicated by the tendency for many ailments to have their own characteristic time peak of maximum intensity. There is evidence to support the idea that there is a rhythmic component in a number of diseases; among the most significant findings related to dyschronism are the following:

Seasonal affective disorder is a form of depression directly linked to the shorter daylight hours of winter.

Sudden cardiac death and nonfatal heart attacks occur most frequently between 7:00 and 11:00 a.m.

Strokes occur more frequently between 6:00 a.m. and noon.

Asthma sufferers experience their worst symptoms in the early morning hours.

The growth of breast cancer cells may be inhibited by melatonin. (When a 1995 study showed that Finnish flight attendants had an increased risk of breast cancer, the principal investigator hypothesized that frequently crossing time zones was part of the problem, since jet lag interferes with the normal production of melatonin. Although his theory has not yet been proven, other studies have shown that melatonin inhibits the growth of breast cancer cells.)

Circadian rhythms have been substantiated in the symptoms of rheumatoid arthritis (least pain and stiffness around 5 p.m.) and allergic rhinitis (peak of worst symptoms between 5:00 and 7:00 a.m.).

DECORATING IDEAS FOR GIRLS BEDROOM GOOD

True, the fairy tale castles and princesses to provide a wide range of ideas for rooms, but today, we would like to show you something new: the heart. You have seen the newspaper attracted to each student a sheet of paper or sticker. It is a known fact: girls love hearts. Therefore, these six theme rooms under furniture in cardiac function. The colors are also typical of girls (pink, light green, yellow, red, light blue). Chairs, pillows, blankets, nothing has escaped the powerful heart-shaped plan.Some these interiors are a little crowded for our taste, but again, this is not our goal manufacturers.

DECORATING IDEAS FOR GIRLS BEDROOM RED COLOR

DECORATING IDEAS FOR GIRLS BEDROOM RED COLOR

DECORATING IDEAS FOR GIRLS BEDROOM YELLOW COLOR

DECORATING IDEAS FOR GIRLS BEDROOM YELLOW COLOR

DECORATING IDEAS FOR GIRLS BEDROOM PINK COLOR

DECORATING IDEAS FOR GIRLS BEDROOM PINK COLOR

DECORATING IDEAS FOR GIRLS BEDROOM BLUE COLOR

DECORATING IDEAS FOR GIRLS BEDROOM BLUE COLOR

DECORATING IDEAS FOR GIRLS BEDROOM

DECORATING IDEAS FOR GIRLS BEDROOM

And More: Deals and Sales – Free from EA, Battlefield Hardline’s Betrayal Expansion/DLC, Until July 12th [Notification]

Just a quick Notification, for those interested in Battlefield Hardline, that an Expansion for it is currently being offered Totally Free from EA via their “On The House” promotion:

Screenshot of the Information Panel in the Origin Client for the Battlefield DLC/Expansion, Betrayal
(Click to see Full Size)

Free right now, EA is offering the Expansion for Battlefield: Hardline called Betrayal, which features 4 new maps (Thin Ice, Chinatown, Cemetery and Alcatraz), 2 New Vehicles, New Weapons (Personalize up to 5 Weapons with the Gun Bench and Test Weapons in the Gun Range!), New Assignments, New Camos, New Paints, and more [Inquisition Swooooord!lol]. While it does require the Base Game Battlefield: Hardline, even if you don’t own Hardline itself, you can Add it to your Origin Games Library and then Download it when you get Hardline in the future. If you are a Subscriber to Origin Access, you already have this available, for ‘free’ (it is part of the Vault Games available to you).

The Expansion/DLC itself was originally released in March of 2016 and although it may not help with there only being a handful of servers in North America on PC with a high number of players on them (there are a lot more if you are part of the EU), it is still worth going and grabbing [in my opinion, especially if people end up coming back or playing more in the future. I have already seen an influx of new players, thanks in part to EA’s recent Up-to-75% Off Sale and DLC Giveaways].

I have also been working on a “One Sentence Review” of all the Weapons in Battlefield: Hardline that I want to post here at The Blog in the future; but for now, if you are interested at all in Hardline, grab this while you can – and See You In the Game!

[Personal Note: I am not affiliated with, nor receive any benefits of any kind from EA/Origin (check the Links, there are no ‘Affiliate Tags’ or anything on them); I am merely an enthusiastic gamer who tries to pass on information to other gamers, when I can. Enjoy, dear reader.]

The Risk Factors That Cause Food Reactions (6-10)

Risk Factor 6. We eat too much at once.

Overeating causes food reactions by overwhelming the digestive system. Unfortunately, reactions also cause overeating by creating food cravings, and this destructive cycle ruins many lives. The problem gets even worse when people eat the exact foods that cause them to experience reactions. This often happens, however, because of the cravings caused by allergic addiction.

Overeating also disrupts the immune response, which further heightens food reactions.

Risk Factor 7. We’re under too much stress.

Stress hurts digestion. When you’re under stress, your stresshormones — such as adrenaline and cortisol — take blood away from your organs of digestion and shift it to the fight-or-flight organs and systems, such as the muscles, eyes, and heart. Sometimes, when you’re nervous, you feel this loss of circulation in your digestive system as butterflies in the stomach.

Diet Start

Proper digestion is most likely to occur when we take timeto eat our meals in a relaxed atmosphere. However, the average worker sits down for lunch for only eleven minutes, and many for only five minutes, or eats a sandwich unconsciously while working.

Risk Factor 8. We don’t chew our foods completely.

This interferes significantly with digestion. Foods that remain in excessively large pieces can’t be broken down properly, even when enough digestive juices are available.

Risk Factor 9. We drink too many liquids with our meals.

This dilutes digestive juices and stomach acid, keeping them from fully digesting our foods.

Risk Factor 10. We combine too many of these risk factors.

If we regularly made just one of these mistakes, we might not have a problem. Most people, though, combine several of these risk factors, and soon they experience the straw that breaks the camel’s back. Doctors call this reaching the allergic threshold.

All of these risk factors can cause your digestive system to dump large, unwieldy macromolecules of food into your bloodstream. When this happens, it generally triggers your immune response.

If your immune system is already impaired, your immune reaction to these macromolecules of food will be even worse. You’ll get reactions to a wider variety of foods, and your symptoms will be more severe and more frequent. Many forces can impair immunity: poor nutrition, exposure to toxins, stress, and lack of sleep.

Therefore, to avoid food reactions, you should not only minimize your risk factors, but should also try to optimize your immune strength, with a healthy lifestyle, ingestion of specific nutrients, and avoidance of toxins. I’ll soon tell you how to do this.

In addition, a number of non-food factors can make food reactions worse by contributing to the allergic threshold. The body doesn’t care if an allergen is a food-borne allergen or an airborne allergen, such as pollen. To the body, an allergen is an allergen. Food reactions are worse in people who inhale airborne allergens, are exposed to toxic chemicals, or are under stress.

Therefore, you are not just what you eat.

Food reactions — and therefore fat — can be caused by many factors, and food is just the most obvious one.

I know that this is a new, strange concept for many people. But I have tested this concept clinically and have seen it work wonders.

Here’s an example: a patient of mine worked in a paint shop and regularly inhaled airborne toxins. This man was bloated, puffy, and red-eyed most of the time, and reacted strongly to a number of foods. He also got sick a lot because the toxins he breathed were stressing his immune system. When he switched jobs and escaped the constant assault of airborne pollutants, his sensitivity to foods decreased dramatically. His progress on the False Fat Diet accelerated tremendously when he quit his job, and he soon lost almost all of his false fat and most of his true fat. Simultaneously, he stopped having frequent minor illnesses.

If any of these risk factors apply to you, you are vulnerable to food reactions.

You are not just what you eat.
Fat can be caused by many factors.
Food is just the most obvious one.

Now I’ll tell you how food reactions develop within your body, after you engage in these risk factors. Once you understand how food reactions work, you’ll be better able to stop them — forever.

Proven Ways to Avoid Holiday Weight Gain

As we head into the holidays most Americans will gain between 8 and 12lbs between Halloween and New Year’s Day.  However, there are ways to avoid this weight gain!
Here are some key tips:
Eat before you drink and celebrate and before holiday parties.     Going into a holiday party on empty and hungry is a sure-fire way to overeat.    Alcohol intake boosts appetite to begin with and if you start out without anything in the tank it just gets worse!    This does not mean overeating – eat a sensible meal about 2 hours before you go to the party.
Try to choose higher protein foods first because protein helps with satiety (feeling satisfied and not hungry).
Fill up on Fiber Rich Foods – which also help with satiety and help create a feeling of fullness when consumed with water.  Focus on the raw veggies and yes you can dip them in some dip that has some fat because together fiber and fat can really assist in managing hunger along with protein.
Eat some fat – that’s right eat some fat!   Fats also are key for satiety.   That being said a little goes a long way!
Bring your own food to a party.   Rather than having only high calorie, high sugar and high fat foods bring something you enjoy that is also healthy along with you!
Eat slowly and chew your food thoroughly – seems simple and it is.    It is also VERY effective for limiting food intake!
Use smaller plates, bowls and glasses – all of which help to slow down food and beverage intake and make you more conscious of how much you are consuming!
Try to Minimize Sugar and Starch Intake – both sugar and starch wind up as glucose (blood sugar) and high intake drives insulin which results in rebound hunger.      High sugar and starch intake increases hunger – particularly when drinking alcohol because alcohol acts like a super sugar and also drives insulin response.
Pause before getting seconds – as with slower eating and deliberately chewing food this can give your body time to realize it is no longer really hungry.
If you are doing the entertaining have extra containers you are ready to give away so guests can leave with some of the extra food!

Try not to eat in front of the T.V. which distracts you from how you feel and results in mindless eating!
Consider planning a cheat meal but have a plan for how much you are going to eat!   One meal can knock you off course but most of the holiday weight gain comes from completely giving up on healthy eating for many meals.   Planning one cheat meal every week and planning on eating a set amount of the foods you may be craving can work for many people rather than mindlessly eating.      If you plan your meal including your portions of alcohol, sweets, fat and sugar you can limit the damage and still have a great time!
Drink Water.   Often quoted and still true – water is the best beverage and avoiding sugar laden drinks in favor of still or sparkling water can make a big difference in minimizing holiday weight gain.
Workout!   Working out improves mental outlook and burns some calories while reducing stress levels!    When we are stressed we overeat!   Just 10 minutes a day can make a big difference!

Get Your Sleep.   Lack of sleep is terrible for your health and particularly bad for driving appetite and overeating.   Lack of sleep causes hunger and excessive eating because the normal feedback mechanisms that tell you that you are full do not work properly when you are tired.   Basically, a tired brain tells you to eat to feel better and it is VERY hard to resist these urges when tired!

Interested in opening your own WORKOUT ANYTIME?

Think big. Keep it simple. Do it with integrity.”

Those are the guiding words of John Quattrocchi, co-founder of WORKOUT ANYTIME. Together with Steve Strickland, John and Steve have drawn from their 40 years of industry knowledge to create a proven, ready-to-run business opportunity for your success.

Proven Formula – The WORKOUT ANYTIME system operates with low-overhead and delivers high customer satisfaction. Our clubs fit into a range of retail spaces, can be run by a tiny staff, and offer the best workout per square foot in the industry. Unprofitable amenities like the pool, spa, courts, aerobics classes, and childcare have been eliminated in favor of a $15 no-commitment price that keeps members onboard month after month after month.

“People join a club to lose weight, build strength and feel better,” explains CEO Steve Strickland. “But eventually, they fall off because of two things: high price and inconvenience. We built a system that offers an unbeatable workout, an inexpensive recurring payment, and 24-7 neighborhood convenience.”

Matrix Equipment – Top equipment is a crucial component of the WORKOUT ANYTIME formula. Steve Strickland’s career experience in both the equipment and club sides of the industry has guided the equipment selection and floor plan. The WORKOUT ANYTIME fitness layout ensures that members never have to wait for the much-desired Matrix treadmills (10+) and cardio gear.

Easy to Get Started – Franchisees usually join WORKOUT ANYTIME with little or no experience in the fitness industry. Some even keep their existing jobs. Yet, our turnkey systems, vendor agreements, equipment sourcing and leasing support make it easy to get started and easy to succeed. Here’s how our ready-to-run approach guides you every step of the way:

Site Selection and Lease Negotiation

– We maintain a network of experienced real estate brokers nationwide who specialize in tenant representation
– Site selection/lease negotiation service offered at no-cost to franchise owner
– In most cases WORKOUT ANYTIME Franchisees receive a generous tenant improve allowance (cash), and up to 6-months free rent per deal
– WORKOUT ANYTIME’s site criteria includes demographics, access, parking, visibility, tenant mix, competition, and the economics of your club

Find out more here. 

Chronic Illnesses and Diet part 3

Visualization and Chronic Disease

To the ten steps of the Body Clock Prescription, I’d suggest adding visualization, another powerful tool for controlling chronic disease. Life consists of moving forward into images. You get to the dry cleaners to pick up your laundry by making a mental picture of the journey and moving forward into that picture. No picture, no laundry. With visualization, you are going to create an inner picture in order to realize your intention, not just in the outside world of the dry cleaner but in the inside world of your immune system.

The first step is to get the knack of meditation so that your mind and body are in a receptive posture for visualization. Let’s assume that you’ve learned to enter a meditative state; riding on the letter M, your mind can enter a new space within your consciousness. From here, you can take one step forward into your imagination and make a picture of what you want to accomplish in your body.

The effectiveness of this approach was initially proven in an experiment conducted with doctors suffering from terminal or advanced cancer. They were shown accurate images of their own cancer cells and of their immune system cells and were asked to create a realistic visualization of the immune system cells attacking the cancer cells. Most of the doctors successfully curbed their cancer — not to the extent of actually curing it, but in most cases there was measurable improvement. Since then, numerous experiments have shown that a less accurate image of the enemy is just as effective.2

Diet Start

About twenty years ago I used to meet one evening every month with a group of other doctors, including Dr. Bernie Siegel, one of the pioneers of visualization. Bernie shared fascinating examples of the kinds of imagery cancer patients chose to promote healing of their illnesses. It seemed important that the image be accurate in its intent; it was disconcerting when patients chose wimpy defensive images that were the imaginary equivalent of trying to beat their cancer with a wet noodle. People who chose aggressive images did better; lions, tigers, sharks, polar bears and knights in shining armor do better work than a little girl gathering up cancer cells into snowballs and throwing them over the fence.

But what’s a good image if you have chronic inflammatory disease? In this case, redness, heat, swelling and pain afflict some part of your body as it reacts to an enemy that the doctor hasn’t been able to discover or that has disappeared from the scene of the crime, leaving your immune system in a perpetual dither. You need a picture that is soothing but not self-defeating by way of quieting your immune reactions to the point of defenselessness. This is where a chemical or an abstract image may be more appropriate. By chemical image, I mean something along the lines of `Let’s put out the fire’. Remember that inflammation is an expression of your body’s fire burning out of control. Whether it is in the skin, the digestive tract, the lungs, the heart, the nose or the eyes or, for that matter, whether or not it is producing palpable heat, some kind of uncontrolled fire is at the bottom of a lot of chronic illness. Parkinson’s disease, for example, has been characterized as a fire in the brain. And the oxidative damage in the chemistry of autistic children constitutes a kind of fiery injury to their RNA and DNA.

If you are going to employ visual imagery to quench the fire, then why not use pictures that are more effective than merely aiming a fire hose or throwing ice water at it? Instead, try mobilizing your body’s powerful natural resources for quenching the inflammation, calling on your body’s clouds to release rainwater on the brush fires of the prairie where the inflammation resides. This could be your intestine if you have colitis, your joints if you have arthritis, your skin if you have dermatitis, your lungs if you have bronchitis and so on. You can even get technical and make your raindrops into vitamin C, vitamin E, beta-carotene and other potent antioxidants. Communication between your meditating-visualizing brain and the resources of your body is more dynamic and more specific then you know.

When Bernie Siegel began talking about people’s responsibility for their own health and healing in the face of serious illnesses such as cancer, people accused him of ‘blaming the victim’ by placing an unreasonable burden of guilt on the sick person. But you can’t really take control of your health without believing that your health is to some extent under your control. Even a person who has been a victim of some catastrophic accident must believe that he or she can exercise control over healing, to at least a small but critical degree, through the expression of intention in prayer or visualization or by the exercise of sheer willpower.

For people with chronic illness, the lines of causation are more ambiguous than they are in an accident. However irrational it may be, all of us feel guilt for things that happen, like the ill-timed flareup of cold sores just before an important public appearance. Feeling guilty won’t get you anywhere, but feeling responsible is the key to taking charge. If you feel like you’re the passive victim of the event, you may miss a chance to engage your body’s resources for healing. Only by feeling that you can take responsibility for your own health will you be able to make the changes that are necessary for regaining that health in the face of chronic illness.

Low-carb lifestyle guidelines

By now you should have a pretty clear idea of what you have to do to improve your diet and, with it, your entire lifestyle.

The general principles

Cut out all unhealthy refined carbohydrates.

  • Curb your intake of high GI carbohydrates and focus on those from the low—medium GI range.
  • Eat most of your fruit and vegetables raw to ensure a good level of phytonutrients and fibre.
  • Eat more high-quality protein — organic if at all possible.
  • Increase your intake of healthy omega-3 fatty acids by eating more oily fish, and use only natural unrefined oils in your cooking.
  • Cut out tea, coffee, concentrated fruit juices and alcohol, and banish soft drinks of any kind, but drink at least eight glasses of water per day.
  • Incorporate 30-45 minutes of aerobic exercise at least three times in to your weekly routine, and carry out resistance training at least three times per week.

Diet Start

DIETARY MYTHS

Myth: skipping meals is a good way to lose weight.

Fact: your body needs a regular supply of nutrients each day in order to work properly. If you skip meals, you will be more likely to make up for it by snacking or eating more at the next meal. Studies show that people who skip breakfast tend to be heavier than those who eat a nutritious breakfast. A healthier way to lose weight is to eat many small meals throughout the day.

Myth: eating after 8 pm causes weight gain

Fact: it doesn’t matter at what time of day you eat; if you are eating too much of the wrong type of food and not getting any exercise, that will make you fat.

Are you all fired up?

You should be, because you are going to get back in control. You now know what you are doing, understand your body and should look on this as an important project that will bring untold benefits. Now that you understand how your body metabolizes the food that you eat, you can start to view food as a vital fuel that helps your body function at optimum levels. This should be a turning point. It should change your attitude from one of ‘Oh no, I’m on a diet’ to a more positive ‘I’m doing this for me, to make myself healthier, fitter, stronger, leaner’.

Pretty soon you are going to be feeling and looking better. Think of that boost of self-confidence that you are going to experience. So get ready to roll and flex that determination. Whether you have 3kg (71b) to lose or 30kg (701b), this regime is only going to work if you are committed to changing your eating and exercise habits for life.

The rest of this section offers advice on weight, and on setting goals for (and managing) weight loss; suggests how to cope with the cravings and snack attacks that may arise when you are on a diet; and gives tips on taking supplements and sticking to a healthy diet, even when you lead a busy lifestyle. It is followed by the three-step programme and nutritious recipes that form theMainstay. Plus, there is also a section on adapting the plans to suit a vegetarian diet, which includes some delicious low-carb vegetarian recipes.

DIETARY MYTH

Myth: low-fat or non-fat means no calories. Fact: many low-fat and non-fat foods still contain a lot of calories. Often these foods also contain extra sugar, flour or starch thickeners to make them taste better. These ingredients all represent extra carbohydrates. As we have seen, you need to eat healthy fats to lose extra fat.

BEAUTIFUL INTERIORS STYLE FROM SHH

SHH is a London-based company, founded in 1992. Interior design is not their only strong point that the company also makes architectural projects. But now we want to show you how a room can be transformed into an elegant and modern in their vision.

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS FROM SHH

We collected up to 15 different interiors that stand out and can become a real source of inspiration. We deal in the living room, bedroom or the hallway of boredom and failed surprising elements are added to create comfortable spaces. White is airy and gives a sense of calm, while the funky food the best and rebels. Color and light is present in some unusual arrangements with excellent results.

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS STYLE FROM SHH

BEAUTIFUL INTERIORS STYLE FROM SHH

BEAUTIFUL INTERIORS DESIGN FROM SHH

BEAUTIFUL INTERIORS DESIGN FROM SHH

Quick Tip: Can’t Record Your Game At All? (64-bit/32-bit Fix)

Just a quick tip for when it seems like you cannot record your game ‘at all’:
64-bit computing is still relatively new for home users, which means that not all 64-bit hardware and applications communicate without problems. Many game recording apps simply can’t record games that operate in 64-bit modes. Just look for a 32-bit version of your game/gameclient and then your game recording program (no matter which one you use, be it Dxtory, Bandicam, MSI Afterburner..) should be able to record the screen. [For games that use Java (eg. Minecraft), download the 32-bit Java at their website]

See you in the games!

Modern Side Table Lamps Design

If you are an artistic creation lover then you must observation for modern side table lamps. It has a funky look which might make you feel as if you are in around future time or in space. Its abstract and artistic design complements the other paintings and art fashionable your home along with elegance and beauty.

If you’ve a woody environment at your home base decorated in Indian style, then western table lamp design is the best choice for you. The western table lamp comes in a cowboy sort of look. Either there is a cowboy along with a horse of just a horse attached on it. This gives a very classy look to the woodsy type of a house.
Country style reminds you of Country music only but you can also find a country style table lamp also. It’s farm animals alike cows, cocks and others designed on it. It is considered to be the most colorful sort of lamp with natural color and scene.

Oriental lamp shows much about Asian culture in its design. The unique Asian roots can be seen in this type of lamp and would best fit if you have a room filled with Asian souvenirs.
Choosing the perfect table lamp for every room should be your concern as their being complementing the living furniture makes out the atmosphere. There are various styled table lamps for your side tables like western table lamp, modern, urban, Asian and nation but to pick the better for every room needs examination and time. Here is a little guideline for you:
Now you have a selection of lamps from which you can choose the best for your place. Take care of the existing decoration of your home when you choose the side table lamps.

Sample Dining Room Minimalist Design Idea

Sample Dining Room Minimalist DesignSample Dining Room Minimalist Design

Sample Dining Room Elegant DesignSample Dining Room Elegant Design

Sample Dining Room Classic DesignSample Dining Room Classic Design

Sample Dining Room DesignSample Dining Room Design
Sample Dining Room Elegant DesignSample Dining Room Elegant Design

5 Ways to Use iPads in Math

Today I’m linking up with the Tune into Technology Linky to share some ways to integrate technology in Math. Since I teach in a 1:1 iPad fourth grade classroom, I’ll focus on how we use iPads in Math.

1. Build a Math Notebook in Evernote



Evernote is my all-time favorite note-taking app, and that extends to math as well. In addition to typing text notes, students can attach documents (handouts, activities, etc) that they’ve viewed on their iPads and they can also take pictures through the app or attach pictures from the camera roll. That’s helpful when they build models with manipulatives and want to archive their work.

2. Reinforce concepts or conduct inquiry research with math movies.

BrainPop
Khan Academy



Two of my favorite apps to use in math are BrainPop and Khan Academy. I often use these to introduce a lesson or to differentiate instruction. I often feel like I get stretched pretty thin during math instruction because I have such a range of skills in my classroom, but these apps help. If I’m working with a student and a second student needs help, I can direct that student to a video on Khan Academy and encourage the student to see if that will help him or her figure out the problem until I can get there. Often the additional examples help the student understand the problem better.

3. Make math movies to assess understanding

Show Me

Explain Everything

I often ask students to show their solution to a problem on an app like Show Me or Explain Everything. There they can model their thinking using pictures or drawings, and they can record their voice as they explain their work. I learn so much about their understandings through their explanations, and it helps to assess the Standards for Mathematical Practice included in the Common Core.

4. Make a Vocabulary Notebook in Keynote

Keynote


I like to use Keynote for their math vocabulary because we can create slides that use the Frayer Model for vocabulary instruction. In addition to typing definitions, examples, and non-examples, they can draw their own pictures on a whiteboard app, take a screenshot, and add them to the slide. They can also search for real-world examples to photograph and add. Once they’re finished, they can easily alphabetize their entries by rearranging the slides.

5. Use QR codes
Our math word wall has QR codes linking to the definitions of each term so students can quiz themselves about the meaning of a term or review terms they’ve forgotten. If you click on the image below, you can get a freebie example of this for the properties of multiplication.

My complete sets for grade 4, grade 5, and 4/5 combo are available at my TpT store.

We’ve also written riddles in Geometry where students could scan a QR code to find the answer. You can read my post about that here.

And we’ve used QR codes to help check homework assignments. I’ve written about that here.

I’m really just scratching the surface here — there are so many other possibilities and several math specific apps to use, but I’ll save those for future posts. I’m excited to read other examples of integrating technology into math, though, and if you haven’t visited the linky yet, you definitely should. I got so many great ideas for reading and writing from it last week!

How do you use technology in Math?

The trip to Hyderabad India

I am starting my next assignment on the 3rd of October 2009 in Hyderabad India. This will be my 4th trip to India in the last 2 years. Going to india is a funny thing for me as I cant wait to get there. Once I am there I get the feeling that I need to get back home (Sri Lanka) soon.

I have applied for my visa nd waiting to collect it. will do it tomorrow.

And More: Share and Tell – Imitating The GTAV Title Logo Style [Commentary]

I recently created a logo for The Blog, done in the style of the GTAV game logo (Grand Theft Auto Five Title Logo, seen Left). I had a lot of fun figuring out how to imitate the look of it and wanted to share a bit of how I did it, in case others want to give it a try too, or just to enjoy the ‘Behind The Scenes’ story of things… Originally I was creating this to be used on Headers for posts here at The Blog (since I was playing GTAV lately), but I also put it on a Wallpaper posted at The Blog’s Flickr page – but then decided that from now on, I will not put ‘my logo’ on Wallpapers that I want to share with everyone, I will just use whatever game logo the game is at the time, reserving ‘my logos’ mainly for use here [I was feeling bad for ‘forcing them onto others’ if I were to put them on Wallpaper for sharing with everyone…]

Just below this paragraph then, is The Blog logo, re-done in the style of the game logo from the game GTAV (Grand Theft Auto Five)… Created entirely in Corel’s Paint Shop Pro, I first had to find a font for the lettering. I found a few of them (Pricedown is one, GTArussian is another, the name of the last one escapes me at the moment). I typed out each word separately, so that I could place them really close together (like the GTAV logo has for its’ words), overlapping some of the ‘tails’ of the text (which was fine, for me). The “B” behind the ribbon was something else… Baskerville, that’s it.

My version of The Blog logo, done in the style of the GTAV game title logo
(Click to see Full Size)

The ribbon was its’ own element, blanked out (white with no text), placed on top of the “B”, which itself was made in layers of outlines and a Gradient, using the original game title logo (“GTAV”) as the source for the green shades (clicking with ‘the dropper’ on the far sides of the green area in the “V” in the GTAV logo). The spiral design was found online by an anonymous maker [let me know if it is you, I’ll give you Credit!], which I had to colourize and then placed in a way that was similar to the GTAV logo, on a layer below the text “B” vectors, so that it ‘shows through’ within the “B” area.

The text on the ribbon was made with a font that escapes me at the moment, but the colouring for it was hard to figure out, as it looks like it is directional (as though a light were casting highlights from one direction). I figured out to use the Bevel effect in the Layer Styles of Paint Shop Pro, to emulate a light source coming from the bottom-left, for the text ‘The Blog’. It turned out great for imitating the lighting on the text ‘Five’ in the GTAV game title logo ribbon! The hardest part was getting it to ‘curve’. I don’t know how to create a line and make the Text follow the line yet, so I simply used the Mesh Warp function, to ‘move it around’ manually and get it to seem at least a bit like it is curved.

A few layers of black and grey for ‘outlining’ the text and entire composition (made by ‘expanding’ the selected text and then Filling with Black or Grey, moving the white text in front of it each time) and it was complete…

I’ll mainly be using it in Headers and Screenshots in posts almost exclusively here, at The Blog. I just thought that some might like to hear a bit of ‘Behind The Scenes’ or ‘Commentary’ about it – hey, there are a lot of people that (like me) watch Commentaries! Haha

I hope you enjoyed my little Share and Tell – and if you play GTA Online – See You In The Game!

Original GTAV game logo design by Rockstar, Take-Two Interactive

[Personal Note/Declaration: I am not associated with, nor do I receive anything in any manner or form, for mentioning Corel or Paint Shop Pro. I am merely an enthusiastic user of the program (I have played with it off and on since it was owned by JASC). For fairness and completivity, I shall mention another great graphic editing program, The Gimp (now just called GIMP?) – which is Open Source and entirely Free – all of the steps above can also be performed with this free program]

Workout Anytime in North Fulton Newspapers

Workout Anytime in North Fulton Newspapers in an article titled, “New Workout Anytime coming to Milton.” The article begins with information about the new Workout Anytime opening in Milton and the owners. The article then goes into details about what you can expect at aWorkout Anytime, with a quote from Randy Trotter. General Manager Chris Maier is quoted about why he believes in the Workout Anytime model and Lynn Jackson is quoted about why they’re happy to open in the area. The article closes out with info on how to join and about the expansion plans for Workout Anytime.  Click here for the entire article or begin below.

New Workout Anytime coming to Milton
By: Caitlin Wagenseil
MILTON, Ga. — When two members of a gym found out their beloved workout place was going to close down, they decided to take action. 

Paul and Lynn Jackson, previous members, bought the Workout Anytime in Cumming. Now, they are gearing up to open their second location in Milton with Randy and Heather Clevenger.


(Read More)

Men’s Body Click Diet part 3

What happened with my patient Brooks shows how this scenario plays out. It also reveals why I think that such mysterious and sometimes chronic inflammations of the prostate are usually not infections but instead have a lot to do with factors that are also related to abnormal growth or cancers of the prostate.

Brooks is a 50-year-old businessman whose previously dependable penis had become much less reliable with regard to its sexual responsibilities. At the same time he suffered from discomfort with urination, some hesitancy in starting his urinary stream and the need to get up at night to urinate more than once, which had been his previous custom. He was alarmed that whatever was going on represented some sort of permanent equipment failure. Told at first by both a general practitioner and a urologist that his prostate was ‘pretty normal’ and later that it was a ‘little enlarged’, he had undergone two courses of antibiotic treatment for nonspecific prostatitis. His symptoms improved while he was on the antibiotics but returned when he finished the medication.

I had a telephone consultation with him and after hearing him out and considering various possibilities, I suggested to him that he had ‘some kind of mischief’ with his prostate. This was a much softer diagnosis than that of nonspecific prostatitis. But it suggested a treatment that was aimed more at making his prostate happy than at trying to kill some unseen, unidentified and perhaps nonexistent germs.

Diet Start

The concept of trying to make some organ in your body happy seem, alien to a regular guy like Brooks. He shares with most people the medical notion that there is a specific treatment for every condition and that this treatment is not a strategy to make some part of your body happy. It did, however, make Brooks happy when I suggested that part of his therapy was at least daily efforts to encourage the emptying of his prostate and its tubing by provoking an ejaculation. This was contrary to the no-sex advice he had been given earlier, which seemed to me like the equivalent of telling someone with a bad cold not to blow his nose.

I offered Brooks a package of additional measures to make his prostate happy. These included daily doses of soy protein, flaxseed powder, flaxseed oil, zinc and an antifungal medicine. If you understand why I loaded my shotgun with such a diversity of remedies and how they all fit together, you will also see how I perceive that the whole range of prostate mischief from inflammation to cancer fits together.

I’ve already explained the soy protein and flaxseed powder. I also recommended an additional supplement of flaxseed oil. The prostate gland is one of the richest sources of the hormonelike substances that are made from omega-3 fatty acids, with which flaxseed oil is loaded. They are called prostaglandins, named for the very organ under discussion, because they were first isolated from fluids found in the prostate. (Soon after their discovery in prostatic fluids, they were found to be present in a wide variety of animal tissues of all kinds and not at all exclusive to the prostate, but the name stuck.) The use of fatty acids in flaxseed oil helps the prostate make prostaglandins. But the more important motive for a prescription of flaxseed oil was the strong likelihood that Brooks, like most people, was deficient in omega-3 oils. The flaxseed oil, then, was generally beneficial rather than a treatment aimed specifically at the prostate.

I recommended that Brooks take zinc because it helps the immune system fight off infections and control the body’s inflammatory response to infection. Finally, I prescribed the antifungal medicine because of my consistent experience with other patients where I’d seen that an overgrowth of fungus germs, particularly yeasts, has a proclivity to bother people’s reproductive systems. I have often found stubborn cases of prostate problems in men to be responsive to antifungal drugs.

But there’s another, more important angle to the antifungal treatment Igave Brooks and the many other men I’ve treated in a similar way. In order for the isoflavones and lignans in soy protein and flaxseed powder to be transformed into the substances that beneficially modulate hormone chemistry, they must pass through the digestive tract, where they are changed by certain germs that live there. If the normal distribution of healthy flora has been disturbed so that there are too many bad germs and not enough good germs, the capacity of the intestinal flora to help hormone chemistry will be seriously impaired. Antibiotics are by far the most significant disrupter of intestinal germ populations. A single course of an antibiotic prescription can affect this balance for months or longer. My prescription of an antifungal medicine for Brooks was aimed at two overlapping targets. One was the possibility that a fungal infection was directly related to the prostate inflammation; the other was that his two courses of antibiotics had made him worse by causing a disturbance in his bowel germ population that would correct itself once the number of yeast germs living there was reduced.

Within ten days Brooks and his prostate were both happy. His equipment returned to reliable functioning and he has remained well since. He is as pleased as he is surprised. This is true for many men whose similar responses to simple changes in diet don’t jibe with their expectation that I would have to treat them by calling out the big guns rather than coaxing their bodies back into balance. I’m confident that the remedies I suggested for Brooks worked because they were specifically connected to achieving a hormonal balance governed by a combination of factors related to his digestive flora and an intake of substances that made his prostate happy.

It’s not a big step from consideration of acute problems, such as what Brooks had, to the more chronic problems of prostate enlargement andprostate cancer.

The Sims 2 “Ultimate Collection” (Absolutely Everything) – Completely Free from EA

When I first read about this from EA, that is, the possibility of getting absolutely every single expansion and “Stuff” add-ons completely free, I thought there must be some mistake… A little bit of reading at the EA website and I inferred from the phrasing that it was initially going to be offered as a free upgrade to current owners of The Sims 2 (Digital/Download or Disc-based versions); but I did a little more reading about it today and it seems that EA may be ‘planning on putting it “in everyone’s game list” eventually’… [in my opinion] most likely to arouse just-a-little-more interest in The Sims franchise for the upcoming “The Sims 4” release (now available for pre-order, slated to be released in September 2014).

Therefore, now feeling fully-okay-mostly safe from the dark shadows of ‘releasing something that wasn’t meant to be distributed’, I share with you the Product Code that will allow you to be the proud owner of “The Sims 2 Ultimate Collection”, which includes all of the below:

  • The Sims 2
  • The Sims 2: University Expansion
  • The Sims 2: Nightlife Expansion
  • The Sims 2: Open for Business Expansion
  • The Sims 2: Pets Expansion
  • The Sims 2: Seasons Expansion
  • The Sims 2: Bon Voyage Expansion
  • The Sims 2: FreeTime Expansion
  • The Sims 2: Apartment Life Expansion
  • The Sims 2: Family Fun Stuff
  • The Sims 2: Glamour Life Stuff
  • The Sims 2: Happy Holiday Stuff
  • The Sims 2: Celebration! Stuff
  • The Sims 2: H&M Fashion Stuff
  • The Sims 2: Teen Style Stuff
  • The Sims 2: Kitchen & Bath Interior Design Stuff
  • The Sims 2: IKEA Home Stuff
  • The Sims 2: Mansion & Garden Stuff

Wow, thanks EA!

Note: this package release may be time-limited and EA has stated that they will no longer be updating The Sims 2 or it’s expansions, although they can still be contacted if you are having technical problems running the game

Here are the steps to redeem the free Activation/Product Code:

  1. If you don’t already have it installed on your system, download and install the Origin game client from EA [it is similar to Steam and other game management interfaces] from http://origin.com/download
  2. Create an Origin account if you don’t already have one at https://connect.origin.com/create and log into the Origin client
  3. In the pull-down menus at the top of the Origin interface, click on “Origin” and then “Redeem Product Code…”
  4. In the white box [field] under Product Code, enter this:
    I-LOVE-THE-SIMS
    [hyphens may not be needed]
  5. You should then see a message that the activation was successful and you are the newest owner of  [oops, I forgot what year I’m in, I mean a temporally licensed user of]  The Sims 2, along with all possible Expansion Packs and Add-Ons
  6. Select the game in your My Games list in the Origin Client and install it by clicking the Download button that pops up [and if you’re like me, click OK to the Insufficient Disk Space message]
  7. That’s it! 

Enjoy playing The Sims 2 once again, experiencing all that this version could possibly offer.

Have fun with it and See You In The Games!

My Next Assignments…………

Never have I experienced a hectic period leading up to an assignment like the past few days. I returned from my assignment in Vietnam on the 3rd of February. I was supposed to leave for Indonesia on the 8th for another assignment. However the client was not able to process my visa on time and the assignment was cancelled / postponed. During this period I had to finish 6 Organizational Capacity Assessment Reports. So I was running around trying to process my visa as well as trying to complete the reports before I left for Indonesia.

Once it was clear that I was unable to go to Indonesia I was requested by 3 more clients to submit proposals. One assignment was in Bangladesh and it went very fast; I have already set the travel dates, booked the tickets, got my visa and everything is a go. The other in India went very quick even though I had to finish contracting, setting the travel dates, booking the ticket, and getting my visa to be able to start the assignment in India on the 21st.

The other is indeed a nightmare! I have been discussing with this client since October of 2009. Well believe it; some times a contract can take even longer. I have already done 5 versions of the proposal; and the last. This kind of procrastination by a client signifies all or some of the following:

  • The client is not clear about what they want
  • They are haggling about rates and costs
  • The client is unsure about you and the organization you represent
  • Does not know / have the resources / decision making power to use the results of the assignment

I must say that this client does not know me and the organization. That is why I went through the process of doing 5 versions of the proposal. However now I know it is to do with the rates and costs. This has a critical issue that most consultants do not see; which is the client is likely to not be satisfied with your work no matter how well you do your assignment. This also has the possibility to creating a problem when collecting final payment for the assignment.

My advice (which is what I am doing right now) is to stop doing anymore changes to the proposal and wait for the client to come back to you with a contract with any changes that they feel are important. This way you push the client towards closing (sales cycle) and stop you from spending time (which is money) on an order which may not be profitable.

Does Weighing Yourself Help You to Lose Weight?

Do weight changes translate into fat loss?
On a day to day basis a scale is an extremely poor tool for giving you information on changes in bodyfat levels which are very small.  Daily weight changes are mostly accounted for by four factors:  bowel movements, urination, starch and sugar intake, and blood volume.    Since your blood volume typically does NOT vary that much the other factors are more relevant.
Bowel Movements and Urination vary a lot between different people anywhere from 1.3lbs to 5.7lbs in a single day.    This is one of the reasons to consistently weight yourself after you wake up and go to the bathroom and before you eat or drink much.
However, the biggee when it comes to daily weight fluctuation, is usually glycogen storage levels.    Glycogen is just the storage form of glucose aka blood sugar.    All starch and sugar ultimately end up as glucose, glycogen or fat.     
For example, on the front end of a low carb diet you will show big weight loss which is almost all water because you store glucose/glycogen with water – hence the term carbo “Hydrate”.  Muscle and organs contain the highest levels of water, and this is significant because most of your bodyweight comes from muscles and organs. 
  
So daily changes in weight are NOT a good reflection in changes in bodyfat levels!
Can daily weighing help with long-term weight loss and fat loss?

In order to answer this question let’s review the scientific studies that have looked at this issue.     The recent advent of WIFI scales is allowing much more accurate weight records because prior to that people had to take the time to write down their weight each day.
In a recent WIFI scale study called the Weight Trial here were the results:
Over a six-month period, those who weighed daily lost about 13 lbs more than the control group.
Even those who weighed themselves up to five times each week lost less weight than the daily weighers.
Daily Weighers were more likely to do things like eating less food and watching less television so clearly the weighing helped by changing behaviors!
Although this study did not measure body fat, it is quite likely that the body weight loss did translate into significant fat loss.
For certain groups, daily weighing is a bad idea such as people with eating disorders and other psychological disorders including extremely low self-esteem.     In addition, daily weighing does not work for everyone.   For some people the inevitable plateaus or variations in weight loss can very frustrated and quit the whole process!

So daily weighing may be helpful for you, but it is not perfect and it does not accurately measure changes in bodyfat levels so it is important to do use some method of body composition testing to measure these changes which should be your ultimate goal!

Fallout 4 – “Starting Out: On Settlements, Building, Crafting, Materials And More” – A Beginner’s Guide of Tips and Concepts to Settlement Building and Development [UNDER CONSTRUCTION]

Update: Added images for Main Concepts sections (Food, Defense, etc)
Update: Added steps for How To Assign a Settler to a Work Station/Shop/etc
Update: Added how to Give Yourself Any Building Components, or Food, with Commands (Cheats Section)
Update: Added how to Build past the Size Limit in Settlements (Not a Cheat, Doable on Console as well as PC)

[Note.: This post is ‘LIVE’ and ‘UNDER CONSTRUCTION’, as I continue to add more data and Tips and Example Screenshots to it… I decided to make it available now however, to assist those playing Fallout 4; especially those just starting out – seeing as there is a Steam Sale on now (go get it! heh). I will be adding more Text and Tips and Screenshots and More and this post cannot be considered ‘finalized’ until after I add a ‘Final Footer Image’ to the posting (see some of my other posts for examples of this type of ‘end image’ I put in my posts). Please excuse changes as they occur and temporary mistakes and spelling errors, which may show up should you return to this article while it is under development. Enjoy, however – I hope you find something helpful to you – and have fun in Fallout 4!]




I have been having a ton of fun playing Fallout 4 lately… and while I am taking forever to finish up a ‘First Impressions’ of the game [I keep playing and building up my Settlements instead of writing!], I wanted to share some Tips on handling Settlements; some concepts and ideas that might help new users to the game, players that may not have developed their Settlements very much yet, or players that are looking for ways to possibly improve or increase their Settlements and their Production and associated benefits (Bottlecaps income from Stores, Settlers roaming around and finding/providing you with Supplies, Clinics for healing and removing Radiation, and more).

Screenshot showing the Workshop Area of The Sunshine Tidings Cooperative, Decorated (Work In Progress).
(High Resolution Texture Pack enabled [not 100% sure, sorry, but I think it was at this time]
The Automatron DLC Robot Workbench can be seen, center background. Minuteman Flag seen, left wall, foreground)
Click to see Full Size

[Settlements and their development and growth is one of my favourite aspects of the game, not only because it supplies you with Junk/Scrap/Materials to build with and Money as well, but also because of the ‘life it breathes into the game’… every Settlement becomes ‘alive’ with people coming and going, working and resting, asking for help or talking amongst themselves around you. After getting a few Settlements set up and running smoothly, they become a place to restock, sell and collect, modify and improve gear, rest and maybe enjoy some scenery, taking a break from the action by building and re-working, improving and creating a place of solitude and pride, in each little ‘town’ in The Commonwealth…]

Example of the Workshop Mode interface bar, normally seen at the top of the screen in Workshop Mode (Building mode)
Click to see Full Size 

Here then, are some main ideas to start off with or to keep in mind  – hopefully helpful to fellow gamers who are either starting out in Fallout 4 [from the latest Steam Sale], or are looking for ways to improve their currently-undeveloped Settlements (colour-coded somewhat-by-importance to help separate them for easier reference):

1.  In the very beginning, build Food and Water and Beds, as much as you can.  

These three things (Beds, Water, Food) are the main limiting factors to how many people will come to live in a Settlement. 

 [The maximum amount of people that can ‘live in your town’ is supposed to be your Charisma+10 (so if you have 5 Charisma, that would be 15 people); Provisioners who run Supply Lines (more on them later on down further) don’t seem to count towards this calcuated total (by my experience so far). Also, this limitation is stated in many places online – however, I have Settlements that are much higher than this number (over 30!) so I have not finalized the concept of Settlement Limitation Amount, at this time] 

Don’t worry about Guard Posts and Turrets, at least, as much as you might think at the start – because although they do help with the overall safety of your Settlement; reducing the amount of Raids that occur, reducing the amount of Damage that will be sustained in the Raids, and setting a higher Security rating (which seems to affect Happiness, but not Immigration rate – more on Happiness later on…) – you can actually put the responsibility on yourself to take care of Raids at first [and get the bonus experience and loot that comes with it!] by Fast Travelling to the Settlements as soon as you see the ‘Help Defend’ tasks come up – or making ’rounds’ between your Settlements as they are starting up, as Raiders sometimes attack while you are there and you can then help clear them out – and get all the Loot they drop, too! 

[The game leads you towards building Turrets at your Settlements near the beginning, too – in the form of a ‘tutorial’ of sorts, somewhat-early on]


2.  Plant any Food (Corn, Tatos, Mutfruit, Gourds, Watermelon and Razorgrain) you find, at first.

Starting out, you want to maximize your growth, so re-planting food you pick up not only increases how much food a Settlement can produce/feed for the Settlers, it also multiplies how much you can harvest!

You can harvest any plants by ‘picking them’ (hitting the Action key while close to them). You can then immediately re-plant the food you just picked, by entering Workshop Mode and going to the Resources>Food section.

A while later, you can start to Cook with your Food – not only do the meals you prepare have special bonuses (they are all different!) but boiling up some VEGETABLE STARCH, made from all materials that you can gather at any Settlement, is a great way to create your own Adhesive building material. Used for almost everything, Adhesive is a very important material to have!



Vegetable Starch, a source of Adhesive, you can create yourself by cooking together Corn (3), Mutfruit (3), Tatos (3) and using Purified Water (1). Purified Water, you can either find as you travel, cook yourself [3 Dirty Water can be boiled up to make 1 Purified Water], or use Water leftover from your Water Sources in your Settlement – as any extra Water that is not used by your Settlers will be ‘kept by the Settlers in the Workshop inventory’ [in the Workshop Bench]. You need Adhesive for Modifications to Weapons and Armor and even for Building – it is used for almost everything and is therefore very important to keep stocked!




3. Tied for the third most important thing/things to start thinking about, are these two concepts:

    • As you can, increase your Turrets and Guard Posts, to increase the Security of the Settlements, and as stated above, reducing the amount of Raids that occur, reducing the amount of Damage that will be sustained in Raids, and keeping your Settlers ‘feeling secure and more relaxed’ (Happier), too. 

    Although the Security Rating of a Settlement (“Defense”) does not effect the speed at which Settlers will immigrate to your little town, the Defense Rating of a Settlement affects the Happiness Rating – which affects how ‘Productive’ the Settlers are in that Settlement (speed of gathering resources, amount of Caps earned, etc) – more on Happiness later on…

    If you have more Guard Posts than you have assigned Guards, they will ‘patrol’ around the Settlement, going between them, back and forth. If you have the same amount of Guard Posts to Guards, they will each stay at one, standing ‘on guard’, most of the time.

    [I personally like to have a couple extra Guard Posts created in my Settlements just to have the Guards move around more… It creates more movement in the Settlements overall and makes them ‘feel more alive’ – something I really like in my Settlements!]

    • Build extra Scavenging Stations as your Settlement grows, as your Junk/Materials allow you to, so as the Settlers keep flowing in, you can assign them to the empty Stations – concentrating more on Scavenging over time will get your Settlers working and searching around, bringing you any Junk Items they find, “automatically” for you to then use!

    Scavenging Stations are assigned to Settlers, who then start wandering the Settlement randomly, picking up Scrap and Junk items they find and placing them in the Workshop over time – they will even ‘break down’ the items at the Scavenging Station – and you can watch them do it! 

    [If you have the Automatron DLC/Expansion, you will find that robots Assigned to Scavenging Stations will simply stand next to the Station with no animations occurring (sadly)]

    ‘How do you Assign Settlers to Scavenging Stations?’
    Further down, there are Steps with Screenshots for each,
    in the Section “How To Assign Settlers To Work Stations”


    After a while, with more Settlers coming in (sometimes they will migrate to your Settlements quite fast, seeing a solid place to find food, water, beds and have some security/safety), you’ll start to see Junk/Scrap/Materials pile up slowly, even Bottlecaps flowing in, sitting there waiting for you in the Workshops of your Settlements. 

     [If you have extra Food/Plants/farming and Guarding that needs to be done, Settlers seem to assign themselves to those first, if you haven’t been by to visit in a while to ‘tell people what to do’ – I have returned to Settlements to find New Immigrants that have started Farming or standing at Guard Posts on their own – but I have yet to see Settlers that Assign themselves to Scavenging Stations]

    Don’t forget to ‘make your rounds’ and periodically travel around to check all of the Workshops, grabbing these extra ‘Caps and ‘Mats, snatching-up the extra Purified Water you’ll see in them, to sell for even more Bottlecaps (especially if you are more desperate for money sometime). Purified Water is created by extra Water production of the Settlement; water that the Settlers aren’t using from the Sources you have set up. This extra Water gets placed in the Workshop for general use and Supply Line provisioning to other Settlements – but since it sells for a decent price and ‘piles up for free’, grab it and Sell it, if you really need ‘Caps!



    4.  As you find more Settlements, start up Supply Lines between them all…

    Supply Lines are ways to ‘share’ the resources of the Workshops between Settlements. You assign a Settler to create a Supply Line between two Settlements, and they then become a “Provisioner”, leading a Caravan between the two Settlements, taking supplies between them so that you can effectively ‘use the Junk/Scrap/Materials/Components of both of them’, no matter which one you are in!

    Supply Lines are started by entering Workshop Mode, then going up to a Settler (one that is Unassigned with no ‘job to do’, or one that you want to make run a Supply Line instead of the job they are currently assigned to) and choosing Supply Line from the bottom menu bar.

    That townsperson will then become a Provisioner, leading a caravan and a wacky Brahmin through the wilds of The Commonwealth… between the Settlement that they originated in and the one that you assigned them to make a Supply Line to.
    Between these two Settlements then, you can utilize any* Junk/Scrap/Components between them, in their Workshops.

    *Note that it appears you cannot share any Weapons or Apparel that you put in [I have not tested Miscellaneous items yet]; you can only share Junk [as of the time of this posting, this may change in a future Update/Patch in the game, of course].

    Requirement: Supply Lines require the Local Leader Perk to be able to ‘organize the people’, which requires a Charisma of 6 – but it has no Level requirement, so you can get it at the start of the game if your Character has a Charisma of 6. If your Character does not have a Charisma of 6, you can also put Perk Points into Charisma as you Level – you get one Perk Point every time you gain a Level – thereby slowly increasing your Charisma to 6, eventually. You can also put on Gear and Clothes that ‘accentuate your Charisma rating’ [eg. Apparel that says “CHR 1”], to get your Charisma up to 6 ‘instantly’!

    [With places like Tenpines Bluff, a Settlement you find somewhat-early on, that has barely any resources at all and barely anything to Scrap for Building Materials – the game seems to even be encouraging you to think about Supply Lines… at least, this is my interpretation..]

    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!


    Workshops will create Scrap building materials (Components) for you ‘automatically’ from any Junk Items you store in them – just ‘keep building’ and if you have the Junk that can be broken down into the Components you need, it will do it for you!



    What I mean by the above Tip is, if you put in a bunch of Forks and Knives you have found (for example), and you want to build something in your Settlement that requires Steel to build with, just go ahead and start Building – your Workshop will ‘smelt/breakdown the Junk items (in this example, the Forks and Knives) into Steel’ automatically, so you can essentially ‘use the Fork and Knife to build with’ – you do not need to “drop the items on the ground and then go into Workshop Mode and Scrap the items one by one” to get the Materials from your Junk items to Build; just select your part to Build and it will let you build it – if there is enough “components from junk parts” to do so!

    [I’m not sure if this changed from an early Patch or something, but I see a bunch of people asking in forums, even recently, if there is an easier way to get Scrap (building materials) from Junk items besides manually ‘Scrapping them one-by-one on the ground in Workshop Mode’ – there should have been a better Tutorial for this, in a way, in the game itself; but I hope this information above clears it up and helps people out]

    Remember: 
    Junk Items = Scrap Components = 
    Building Materials!


    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!
    • Repeated, Scavenging Station concept from above, as a Reminder:

      Build extra Scavenging Stations as your Settlement grows, as your Junk/Materials allow you to, so as the Settlers keep flowing in, you can assign them to the empty Stations – concentrating more on Scavenging over time will get your Settlers working and searching around, bringing you any Junk Items they find, ‘automatically’ for you!

    Scavenging Stations are assigned to Settlers, who then start wandering the Settlement randomly, picking up Scrap and Junk items they find and placing them in the Workshop over time.

     [If you have extra Food/Plants/farming and Guarding that needs to be done, Settlers seem to assign themselves to those first, if you haven’t been by to visit in a while to ‘tell people what to do’ – I have returned to Settlements to find New Immigrants that have started Farming or standing at Guard Posts on their own – but I have yet to see Settlers that Assign themselves to Scavenging Stations]

    [If you have the Automatron DLC/Expansion, you will find that robots assigned to Scavenging Stations will simply stand next to the Station with no animations occurring (sadly)]

    How To Assign Settlers To Work Stations (To Get Them To Perform Jobs In Your Settlement, Such As Running Shops/Stores Or Gathering Items For You To Use)

    Below, are the five simple steps to Assigning a Settler to any Work Station, getting them to utilize it and start contributing to the income of Supplies/Income of the Settlement. In this example, we are going to Assign a Settler to a Scavenging Station:

    1. When you first build/place a Station or Store/Shop or other useable buildings in your Settlement, it will show up as “Unassigned”, in the Workshop Mode interface. All buildings that are Assignable in a Settlement will show a ‘person icon’, in Red, to show that the building has a Requirement that needs to be fulfilled, for it to begin functioning.

    2. Find a Settler that you want to Assign to the Station. This can be a Settler that is already “Assigned” to something (so you can change their Job they are Performing in your Settlement), or a Settler who is “Unassigned” (doing nothing specific). Highlight the Settler by looking directly at them, then press the ACTION button to begin to ‘COMMAND them to do something’…

    Settlers who are Unassigned still gather Junk Items they find while walking around and put them in the Workshop Inventory for use by everyone. However, this happens slower than if they were Assigned to a Scavenging Station (which gives them ‘access to tools’). “Unassigned Settlers” contribute to ‘making people feel uneasy’ in the Settlement – which negatively affects the overall Happiness of that Settlement (resulting in lowered Production for that Settlement). Assign all Settlers to Tasks, or Relocate them to another Settlement (“Move” them), if there are no Jobs/Tasks for them to do.

    3. Go back to the Station/Shop/Building that you want to Assign the Settler to, and highlight it by looking directly at it. Then click the ACTION button to ASSIGN the Settler you just started COMMANDing, to ‘utilize this Station’ (in this example, the Scavenging Station, shown below).

    4. After clicking ASSIGN on a Station/Shop/Building, the ‘person icon’ should change from Red to Green, to show that a person is now assigned to the Station/Shop/Building (for example, the ‘Requirement for the Station to function’ is fulfilled). You should also see a message in the upper-left saying, “This resource is now assigned.” – that’s it! In this example, you have now Assigned a Settler to the Scavenging Station.

    5. If you go back to the Settler, you can check to make sure they are properly Assigned, by looking at them directly in Workshop Mode. They should now show the Task they are Assigned to (in this example, the Settler now shows a “Scavenging Station Icon” (a Buzzard, ‘the scavenger bird’)).

    Perform the above steps whenever you want to Assign a Settler to any Work Station, Guard Post, Shop or Store – the steps are the same, no matter what you need to have Assigned.

    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!

    Example of a Crafting Station, which allows you to create or modify items in the game. This is a Weapons Workbench (from Sanctuary), used to Modify found Weapons, adding higher capacity, faster firing rates, more powerful scopes, and more.
    (Click to see Full Size)


    Starting out with Weapons (Similar Concept to Armor, Below)

    In the beginning, other than the best Weapons you can save for yourself to use (or share with your Companion), SCRAP the rest for Materials…

    Don’t worry about building up a ‘Collection to Sell’ [at the start], you will run into so many enemies that you will have lots of spare Weapons to Sell for Caps later on. Scrapping for Materials not only lets you have Mats to Modify other Weapons you find and improve them as you Unlock Perks with your Points (using the Blacksmith skill) – it will also let you find other parts/materials as you ‘break down’ the Weapons you find into typical weapon-type-materials like Steel, Wood, Plastic and Screws – sadly, you cannot break down Weapons to gain the ever-important Adhesive, it seems [it is ‘already used’, I guess!].

    Example of a Crafting Station, that allows you to create or modify items in the game. This is an Armor Workbench (from Sanctuary, seen in the rain), used to Modify found Armor, adding bonuses like more defense (adding more material to armor), or putting pockets in it (to allow you carry more weight), and more.
    (Click to see Full Size)




    Starting out with Armor (Similar Concept to Weapons, Above)

    In the beginning, other than the best Armor you can save for yourself to use, (or share with your Companion), SCRAP the rest for Materials…

    Don’t worry about building up a ‘Collection to Sell’ [at the start], you will run into so many enemies that you will have lots of spare Armor to Sell for Caps later on. Scrapping for Materials not only lets you have Mats to Modify other Armor you find and improve them as you Unlock Perks with your Points (using the Armorer skill) – it will also let you find other parts/materials, as you ‘break down’ the Armor you find into typical armor-type-materials like Rubber, Cloth, Leather and Steel – sadly, you cannot break down Weapons to gain the ever-important Adhesive, it seems [it is ‘already used’, I guess!].

    Short Story/Example About Armor: Because I could Modify and Customize Raider Arm armor near the beginning, I gave up the higher-protection “DC Guard Left/Right Arm” armor pieces that I picked off of a poor dead DC Guard, [because it does not seem to Modify-able in the game and] because I ‘knew how to Modify’ the Raider Armor to be POCKETED for higher Inventory/Carry space [you need to ‘learn how’, by putting Perk Points (‘skill points earned every Level’) into Armorer, a Strength 3 skill]. I put the DC Guard Armor in a Dresser at the beginning for the time being, using the ‘Pocketed Raider Arms’ I could Modify, then – a higher Carry Weight Limit is a valuable commodity – especially at the beginning!


    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!

    Did someone say CHEATS?

    Sick of trudging around The Commonwealth like a Brahmin with two heads cut off, looking for junk to break down into materials to ‘just build’ with? Tired of picking up every piece of Junk you find, trekking in and out of town constantly and thinking “I just want to build up my base…” or “can’t there be an easy way of getting junk” or “there’s gotta be a faster way to get junk”..?


    Then wonder/wander no more – there is a way to instantly get all the materials you want!

    In Fallout 4 [and most Bethesda games], you can type the item you want and how many you want, of any item in the game, into the Command Console. However, you need to know the item’s Unique Identification Number, first (known as the “Base ID” of the item, in Bethesda games). 

    One way to find the Base ID of any item or object in Fallout 4, is to open the Console (by hitting the Tilde key, “~”, usually found next to the Number 1, in the line of numbers across the top of QWERTY keyboards), and clicking on the item or object in the game. It will then show the BaseID of the object at the top/center of the Command Console area.
    For an example; if you wanted to find out the Base ID of that Deathclaw running at you (and since we are in the ‘Cheat Section’ of this article, say… you want to kill it instantly), then you would find out the ID for it by opening the Console (“~”) and clicking once on the Deathclaw (it should be ‘frozen’ by opening the Console), which would show the BaseID of it just below, at the top of the Console area. Now, for this example of ‘killing it instantly’; you just have to type in “kill”, then a space, then type in the BaseID you see on the screen, and hit Enter. BOOM. That Deathclaw that was running at you (and you were unprepared for, full of inventory and unable to run, no doubt)? It’s dead. “First Crack At The Gear!” 

    [Note1: If you try ‘clicking on the enemy, then typing KILL, then just hitting ENTER’ right away; it may not work as desired. You may end up killing yourself… Although those steps do work, they do not seem to work 100% of the time [in my testing], therefore, the Suggestion of doing the steps from just a bit above (“clicking to get the ID, but typing in KILL and the ID number”), is recommended – to save from accidentally killing yourself and having to LOAD…]

    [Note2: The BaseID seems to change [in my testing], as in, when a Deathclaw (from our example above) ‘spawns’ (comes out of the ground), it will have one ID (and it seems to be ‘unkillable’ for a short time), and then when it starts to come at you and attack, it will change to another ID – which can then be used in the Command Console to ‘kill’ it. Also, Base Identifiers may be ‘Procedurally Generated’, which is, automatically and repeatedly created and changed, as a game goes on. Although this does not seem to happen for items like Food and Materials, it does seem to happen with Enemies and Gear (Weapons/Armor) – so be sure to take the steps above when trying to manipulate objects around you (eg. ‘kill’-ing an enemy), finding the BaseID each time, to be sure that there will not be a mistake or missed opportunity, to utilize the BaseID in the Console.]

    Want nearly-infinite food?
    Want nearly-infinite materials to build with?
    Want to ‘just build and not worry about going around collecting Junk (to build with)’? 

    Then wonder/wander no more – here is a way to instantly get all the building materials you want!


    [WARNING/Suggestion: Although getting all of the items you could ever want, whenever you want, to ‘Just Build’ – effectively turning the game into “Fallout 4: The Sims Apocalypse” where you just Build and Decorate and work on keeping your Settlers at bases Happy (not that that’s a bad thing) – it can potentially contribute to making the game ‘less exciting’, as it takes away much of the need to go anywhere or do anything (other than keep your Settlers’ Happiness maintained). This isn’t a bad thing necessarily (I have one Character I created just to play around and learn the Build Mechanics with and have fun just building and decorating..). I only mention this because I would like to Suggest to create a separate Character to do this with, or remember that when the game ‘gets kind of boring’, to create a Character where you ‘don’t cheat at all’, to create suspense/tension within the game. No matter how you prefer to play though, I hope you enjoy Fallout 4 as much as I have – and still do… Have fun!]

    I have some Batch Files for Fallout 4 below, which will allow you to ‘type in to the Console what you want’ [Materials to build with, or Food (so you won’t have to worry about Farming or feeding your Settlers)] and you will instantly have a ton of those items on your character.
    With the Items in them listed in Alphabetical Order, I have one file that is for getting Materials (Scrap/Junk to Build with), one file that is for getting Food (to Eat/Cook with) and one that is for getting huge amounts of both in one shot…

    To use these Batch Files in Fallout 4, simply download the Text file(s) and place them into the Fallout 4 game directory/folder, where the game data/files are.
    [Don’t worry, they are just Text Files, but I give directions on how to make your own further down, if you ‘don’t like to download things unknown very much’.]


    To quickly find the Fallout 4 game files location [in Steam, on PC]:

    Go to the Library section in Steam and Right-Click on the “Fallout 4” listing, choosing ‘Properties’.

    In the Properties window that comes up, click on the ‘Local Files’ tab.

    It shows you what Drive the game is on; but to quickly get to the game files themselves, click on the ‘Browse Local Files’ button, which will open a new File Explorer window (Windows).

    This location is where you want to Save the Text Files to (the ‘Batch Files for Fallout 4’), usually it will have a Path like “SteamLibrarysteamappscommonFallout 4” on whatever Drive/Partition you installed the game to.

    In that folder, Download/Save (or ‘Paste’, if you ‘Copied’ the files from another location) the .TXT files, to be able to call them up from the Command Console in-game. 

    Example of how the ‘Batch Files’ (Text Files) look, after being placed in the Fallout 4 Game Folder
    (Click to see Full Size)
    Here are the steps to use the .TXT-format ‘Batch Files’ once they are in the game directory (shown for the file for getting Food, the file for getting Building Materials, and then the file for getting Huge Amounts Of Everything To ‘Just Build’ if you want...):

    1A. To use the file that gives you 1000 of all types of Food (so you don’t have to worry about Farming or Feeding your Settlers for a long time); type in

     bat allbasefood

     in the Command Console and hit Enter. That’s it!  

    1B. You can now close the Console and you’ll find you have 1000 of every type of Food in the game, on your person.

    1C. Go to a Workshop to Store the Food there (otherwise you will be ‘overburdened’ with all of that Food in your pockets) – you will find the Food items under the AID section in your Pip-Boy, as shown below:

    2A. To use the file that gives you 1000 of all types of Materials to build with (all of the Crafting Components, so you don’t have to worry about going out and looking for and collecting Junk items to Scrap for a long time and can ‘Just Build’, if you want to play that way for a while); type in

    bat allbasematerials

     in the Command Console and hit Enter. That’s it! 

    2B. You can now close the Console and you’ll find you have 1000 of every type of Building and Crafting Material in the game, on your person.

    2C. Go to a Workshop to Store the Materials in the Workshop Inventory (otherwise you will be ‘overburdened’ with all of those Crafting Components in your pockets) – you can just hit the STORE ALL JUNK button, to do it in one step.

    For the last one, which gives 9001 of every single type of Food AND Crafting Component in the game [maybe I should have named it “IJUSTWANTTOBUILD.txt”], use the steps below:

    3A. To use the file that gives you 9001 Of All Types Of Everything To ‘Just Build’ With (all of the Crafting Components in the game, so you don’t have to worry about going out and looking for and collecting Food OR Junk items to Scrap, for a long time and can ‘Just Build’); type in

     bat allyourbase9k

    in the Command Console and hit Enter. That’s it! 

    3B. You can now close the Console and you’ll find you have 9001 of every type of Building and Crafting Material in the game, on your person.

    3C. Go to a Workshop to Store the Junk Items (Materials) and the Food (from the AID section in the Pip-Boy), in the Workshop Inventory (otherwise you will be ‘overburdened’ with all of those Every Frelling Thing In The Game For Settlement Building in your pockets).  

    Here is where to Download the Text Files to place into the Fallout 4 directory/folder (the ‘Batch Files’ to use), from the GoogleDrive for The Blog:

    allbasefood.txt file
    allbasematerials.txt file
    allyourbase9k.txt file

    If you don’t like to normally Download things ‘from unknown places/people’ [aren’t we just ‘Friends That Haven’t Met Yet, though, my dear reader?], here is what the Google Drive link looks like when you click on it:

    Still, feel free to Scan the files with your installed Anti-Virus Program(s), or online through something like Virustotal.com (this is actually a good idea to do with anything Downloaded..).

    If you you rather create your own Text Files, to place into your Fallout 4 directory/folder, to run as ‘Batch Files’, to give yourself an amount of these items, instead of fully Downloading the Text Files offered above – then here are the steps to create your own files:

    Is There A Way To Build More, Past The Limit?

    Sadly, there is a limit to how much you can Build in a Settlement – indicated by the SIZE bar in the Upper-Right corner of the screen in Workshop Mode. While this limitation is there to stop us from building so much that it makes the game go down to 1fps in that area, the SIZE limit is pretty conservative [in my opinion] and I found out that there is an easy way to ‘Build More’ – getting past that Build Size Limitation….

    When you see the message, “Nothing More Can Be Built.”, you can just press your lips together and blow, making that weird trumpet sound, after reading the steps below. No Limitations for you! Just follow these steps and you can continue to Build in that Settlement:

    (Note that this is not a Cheat, it does not affect Achievements and it is doable on Console as well as PC)

    • Get some Weapons together on your Character (specifically Guns, as this specific technique does not appear to work with Melee or Thrown in my testing). Apparel and Junk does not work for this either.
    • Bring up the Pip-Boy and Drop the Guns on the ground
    • Close the Pip-Boy and enter Workshop Mode (by Activating the Workshop Bench or holding ‘V’ (on PC) to open Workshop Mode)
    • Look down at the Guns on the ground and STORE them in the Workshop Inventory (careful not to SCRAP them, that is not what we are doing here at the moment!)
    • You should now see your SIZE bar going in reverse and it will even change from Red to Yellow to Green. BOOM. More Room To Bloom. 

    That’s it! You can now build more in that Settlement. Enjoy! If you want to retrieve your Weapons, you can just go into the Workshop Inventory (“Transfer”) and get them back – which means you can repeat these steps over and over, as needed! (Don’t forget to Share your Screenshots on Steam or elsewhere – other people want to see what you can do – and it gives them new ideas, too)

    Although it is possible to get past the Build Limit by simply dropping ‘any item’ and Scrapping it [I recently learned this on the Steam Forum for Fallout 4], this is still not what I was trying to do, with the Steps above. My intention was to STORE the Guns, so that they can still be utilized later – selling them for Bottlecaps, or ‘Breaking Them Down’ and taking their Modifications off to use on other Weapons, or just using them as Weapons in the game on the Character (or given to Settlers to help them fight off Raids/Attackers) –  that is why the Steps above utilize my method. Storing the Guns allows you to continue to use them (as opposed to Scrapping them into Components to Build/Craft with).



    [……I am going to add to this post, as I remember things that I already have forgotten and can’t seem to bring back up at the moment to throw in here; but I still hope someone finds these concepts and Tips helpful, for either starting out in the game or improving your Settlements (there are more advanced concepts to come….. Have fun with Fallout 4!]

    My trip to Kuala Lumpur, Malaysia and Singapore, July 2010

    This was my first trip on a budget airline (Air Asia); it definitely changed my opinion of budget airlines. This trip is more a business development and prospecting trip rather than an assignment. On the surface KL does look developed. However I have my doubts regarding the psyche of the Malaysians. I took in the usual site such as the Petronas Tower etc. The weather, the fauna and flora resembles Colombo; I did not enjoy the high humidity and the afternoon thundershowers.

    Singapore was as usual (I have stopped counting the number of times I have been there) very orderly and hit the usual shopping and fun places. In my opinion the Singaporeans have not only developed in terms of the look and feel of the place but also in terms of the psyche of the people. I truly believe that they do think like westerners and the Japanese.

    Let me give a classic example. As mentioned earlier I went to Malaysia and Singapore during the monsoon season and I made an observation. In KL when it rains; like in Sri Lanka the people stopped what ever they were doing and took shelter from the rain. Those who even had umbrellas took shelter as it appear they did not want to get there footwear wet.

    However, in Singapore it was very different. I happened to be out one day early morning (going for a walk) when it started to rain. I was walking pasta a primary school and this is what I saw. A teacher was leading a group of very small children (6-7 years) who were clad in rain gear and they walked in a line and came out of the premises and they walked to the MTR station and got in to the train. Undoubtedly they were going on some sort of educational trip. What does this mean: In my opinion the Singaporeans are teaching their children to face obstacles and overcome / work around / find solutions to them. This is the essence of the psyche of an industrialized nation as opposed to an agrarian nation which generally accepts the affects of the elements as “gods will” or “karma”.

    So even the very small children are trained to deal with a simple thing as the rain and have an attitude of using the right equipment to allow them to go about their daily business. So in adult life they do go and conquer the world economically.

    I can certainly say that in Sri Lanka the vast majority of people have this agrarian psyche. Based on my observations it seems that quite a number of people in Malaysia still do too. So the challenge for those of us who have the privilege of influencing people is to; in some way contribute towards instilling the right attitude rather than anything else. I can say from my experience as a consultant and a trainer I derive more satisfaction in seeing this than my clients make huge profits. I say this because these individuals with the right attitude have the potential to influence / be a role model for the masses in these underdeveloped countries.

    ROOM DESIGNS FOR TEENAGE GIRL

    ROOM DESIGNS FOR TEENAGE GIRL

    For today, we have compiled a series of five images that represent the rooms of girls. We try to choose different: we went with serious internal and sober, but also gave him a shot at the famous and very popular pink, orange and red scheme. All rooms are practical, with work spaces, small libraries and shelving systems for books and CDs and fine cabinets specially designed for teenagers. Last but not least, we believe that the mirror is a required element in the bedroom of a girl, although some of the pictures below, you will realize that they have a special status. Even if all design ideas have a particular theme rooms, the furniture is very close to each other to create interiors that are functional and aesthetic. Take a look!

    ROOM DESIGNS FOR TEENAGE GIRL
    ROOM DESIGNS FOR TEENAGE GIRL
    ROOM DESIGNS FOR TEENAGE GIRL
    ROOM DESIGNS FOR TEENAGE GIRL

    HOME DECORATING WITH ASIAN STYLE

    Asian themes uses bright and vibrant colors, and thus, it might not always be a good idea to do up the whole house using this theme. It is always better to concentrate on some part of the house and use it as the focal point by decorating it using the Asian theme. There is heavy dependence on texture and color in this theme, and this needs to be kept in mind.

    Home Decorating With An Asian ThemeHome Decorating With An Asian Theme


    Home Decorating Room With An Asian ThemeHome Decorating Room With An Asian Theme


    Home Decorating With An Asian Theme Bed RoomHome Decorating With An Asian Theme Bed Room

    One of the best places to decorate using the Asian theme is the dining room of the house. When the dining room is decorated, one obviously can use the vibrant colors but besides one can also add decorative pieces on the table. One can use things made of bamboo or Chinese utensils which are very famous in the Asian area.

    Cellulite Breakdown and Essential Detoxification part 1

    Waist Disposal

    `Excess fat is nothing less than a poison depot in an over-acid organism.’ These words were uttered half a century ago by Danish physician Kristine Nolfi — an expert in healing the body through diet. They lie at the core of the cellulite phenomenon. One of your body’s most effective ecological mechanisms for protecting itself from excessive poisons taken in through food, air and water or produced from within as a by-product of metabolism is to lock these toxic materials into fat cells. In the case of cellulite this natural protective mechanism goes one stage further — encasing these wastes in the interstitial fluids and ground substance by binding them within hardened connective tissue. There they sit year after year producing jodhpur thighs.

    Diet Start

    Personal Energy Crisis

    This whole self-protective process is perfectly normal and, all in all, functions rather well, except for two things. First, in the presence of a high level of female hormones it tends to turn intocellulite. Second, it tends to deplete your energy — not only on a cellular level so metabolic processes don’t function in an optimal way but overall so you are prone to fatigue and need stimulants such as coffee to get you going and to keep you going. For in any body which has a high level of waste stored in its cells, much of the available energy is channelled into trying to cope with these wastes instead of being used to keep metabolic processes functioning at a high level of efficiency. In broad terms you sense a lack of overall vitality and over the years develop a tendency to become chronically tired — sometimes so much so that it can even become very difficult to make the effort to help yourself. To shed cellulite you need first to help your body detoxify itself and eliminate the pockets of static tissues where, like stagnant ponds in a meadow, toxicity has been allowed to accumulate.

    A lot has been written in recent years about detoxification. Some of it can sound quite mystifying. But the whole process is really quite simple. The reason you have built up these pockets of wastes is simply that your body is continually having to cope with more poisons than it can eliminate in the normal day- to-day course of events. Remove some of the burden of what is creating this excess toxicity in your system by laying aside coffee, alcohol and over-processed foods complete with chemical additives for a time, and you are halfway there. Add to that a very simple and temporary regime designed to trigger rapid detoxification, some movement and some external help, and quite naturally you trigger your body’s own mechanisms for clearing out the junk. This is the first step in the Cellulite Revolution. There are lots of ways you can do it but the simplest of all to begin with is to go on a two-or-three-day applefast.

    Applemagic

    The apple has long been valued as health tonic, medicine, cosmetic and bowel-regulator all in one. Apples are low in acidity to help balance stored bodily wastes which tend to be acidic. They stimulate the flow of saliva in the mouth and clear away debris from the teeth. Eating raw fresh apples stimulates circulation in the gums too. In folk medicine the apple was traditionally used for eliminating obesity (in part no doubt because of its detoxifying ability) as well as for the treatment of skin problems, bladder inflammation, anaemia, insomnia, intestinal parasites and even bad breath. In recent years we have come to appreciate the kind of fibre apples contain. In addition to cellulose (the most common variety of fibre such as that in bran which binds water and increases faecal bulk), apples are also rich in pectin — a special form of fibre with exceptional detoxification properties. Unlike cellulose, pectin does not bind water. It is water-soluble. Pectin has no influence on faecal bulking, but it can be an excellent substance to help lower cholesterol and for eliminating bile acids from the intestines. Also, and in many ways most important of all for keeping cellulite away, pectin is a natural chelating agent for binding dangerous heavy metals in the body such as aluminium, cadmium, mercury and lead, and eliminating them.

    And More: Deals and Sales – 2014 Summer Super Sales

    Just to let more people know, in case some didn’t already, there are a lot of great Summer Sales going on right now at various game distribution/retailer websites [think of them as ‘Winter Wonder Sales’ if you are in the Southern Hemisphere]. Here are a couple samples:

    Good Old Games, now called GOG.com, have both ongoing sales and Time Limited Deals, with games such as The Hitman Series, Simcity2000, the Baldur’s Gate and Icewind Dale series, the Might & Magic series, the Wing Commander series, Quest For Glory and King’s Quest series, the Rollercoaster Tycoon series, and much more
    (Click to see Full Size)

    Steam is having it’s Summer Sale, that also has some ongoing deals with some Time Limited Sales, with games such as The Witcher series, Euro Truck Simulator series, the Left 4 Dead series, the Total War series of games, Red Alert 3, Civilization 5, and much more
    (Click to see Full Size)
    Some of these are Time Limited Deals, meaning that they are only ‘on’ for a few hours, or change after a few hours – so check back there once in a while and see if any games you have been waiting for are on sale – most of these are 80% or 90% off!
    [For the most part, they seem to ‘stay’ on sale/remain on sale, but at a slightly higher sale price than within the ‘time limit’ (but are still available at less than regular price)]
    I hope you find something you like and See You In The Games!

    Peanut Benefits for Health

    PEANUT BENEFITS FOR HEALTH

    Peanut Benefits for Health – Peanuts are legumes that take the benefits to the area of the roots are forming pods, do you know if the bean plants it has the advantage of a very remarkable in the area of agricultural land, the reason is because the beans are plants that collaborate with types of mycorrhizal fungi to synthesize N in the air become available to the plant, N that includes nutrients that are needed by plants in large enough quantities, land former planted beans have levels of N were pretty much up intake N for the next crop is still there. Not only useful for agriculture, but peanuts also have benefits for our health.
    Peanut Benefits For Health - 1
    Now let us try to discuss specifically about the benefits of the bean plants to our body and how much is the benefit that we can take from this pod peanut plants. Consider the benefits of peanuts below:
    Peanut Benefits for Health
    1. Helps To Increase Fertility
    For you are the woman I’m sure you’ve got the point. Peanuts contain folic acid, according to research women who ate peanuts 400 micrograms of folic acid have a lower risk of having a baby born with a serious neural tube defects up to 70% at the time before pregnancy and early pregnancy
    2. It Can Prevent Painful Gallstones
    During 20 years of research have shown if by consuming 1 ounce of peanut butter a week can reduce the risk of developing gallstones by 25%.
    Peanut Benefits For Health
    3. Can Help Reduce Depression And Stress
    Peanuts are a good source of tryptophan, the role of these substances can increase serotonin antidepressant effects (which can affect the atmosphere in the heart) if there is an increase in the amount of serotonin in the blood.
    4. Can Improve Memory
    The beans have a content of vitamin B3 or also often called by naisin content is also beneficial to maintain the health of the brain and improve memory.
    5. Lowers Bad Cholesterol
    Peanuts contain cholesterol substances that are good for our bodies, as well as the good cholesterol can reduce cholesterol levels and can control the evil by means of dominating it.

    Hopefully article Peanut Benefits for Health can we share today can be beneficial for you. Do not forget to always visit the website abouthealthbenefits.xyz to seek other health articles. Thank You.

    ever worry about what happens to your car when you drop it off at the dealership? Worry no more. Leave your cell phone in the car, with the camera on, or put in a Go Pro, or dash cam

    Seriously, last week some customer did this at the dealership I work at, he wanted to bust the guys who detail the inside of the cars

    http://tywkiwdbi.blogspot.com/

    How to Cope with Too Many Snow Days

    Ice and Snow, Go Away!

    This has been the worst winter since I moved to Atlanta eight years ago. We have six-week terms, and during these last six weeks, we lost two days to extremely cold temperatures (by Southern standards), three additional days because of the “snowpocalypse” that buried Atlanta, and now I’m home again due to Winter Storm “Pax” that will likely shut us down the rest of the week. That’s nearly one-third of our term lost!

    Adding to my dilemma, our calendar builds in week-long breaks at the end of each six week term. So we won’t be back in school next week either. It’s a serious wrinkle in my plans.

    I talked to my fourth graders about this yesterday, and we worked out a plan so they could continue to work from home during these inclement weather days. It’s a really rainy, dreary day anyway (we’re at the “wintry mix” stage of the storm), so it’s not like they’d be outside sledding today. I also suspect that many parents are welcoming the activities at this stage of the winter!

    Here are my suggestions for telecommuting with your class during winter weather.

    Building a Virtual Classroom

    1. Choose a mix of activities that can be shared with parents. I knew early last night that we’d be off today, so I found some activities that aligned with what we’re studying right now. While many of the activities require computer access, I purposefully included some that do not. For example, we’re building weather instruments out of household items, writing stories, continuing our reading, etc. But we’re also using some online resources.

    2. Take advantage of online instructional videos. Two of my favorite free resources are LearnZillion and Khan Academy. I selected videos that align with the math and ELA content we’re working on now.

    3. Stay accessible through your Learning Management System. We use Edmodo in our class, and it’s a great tool for turning in assignments and having class discussions. I’m checking in throughout the day to answer students’ questions and participate in the discussion questions I set up there earlier.

    4. Take advantage of the resources students have at home. I teach in a 1:1 iPad classroom, so we’re constantly on iPads. There are lots of flash-based games that we can’t run on our iPads, however. I’m fortunate that all of my students have computers at home, so I’m incorporating more of those activities for students to complete. I’m also choosing some really fun and engaging simulation games that we just don’t ever get to in class. Two examples:

    Law Craft – For the record, all of the games at iCivics.org are worth checking out. In this particular one, students work to craft a law and take it through the legislative process. They have to build support by making concessions, work out the details through committees, and ultimately get the president to sign it. It teaches a lot about how a bill becomes a law.

    Edheads Weather – This aligns with the weather forecasting aspect of our weather unit. Students will work through different weather maps to report the weather and predict future weather events. It’s another great interactive game. I highly recommend the activities at the Edheads website. The only downside is that there are lots of ads, and sometimes pop-ups.

    5. Be flexible – I can’t really help students troubleshoot tech issues on their home computers, and I can’t make them do the activities at home. I’m not making any of the activities mandatory, but they’re still available. I’m hoping that with the good mix of opportunities, parents and students will take advantage of the resources I’m offering. But I won’t punish a student who doesn’t. If even a few kids do the activities, it’s better than writing off the weather days as a complete loss.

    Preparation is Key
    It would be impossible to implement this plan with fourth graders if a lot of our technology norms and routines hadn’t already been established. My students are familiar with my class website, Edmodo, and my expectations. Integrating technology in the classroom makes the transition to our virtual classroom seamless.

    How do you handle inclement weather days with your class? Do you have any plans resources to keep students engaged while they’re away from the classroom? I’d love to hear your ideas in the comments!

    On an unrelated note, I have been MIA from the blogging world since October. As I’ve mentioned before, I’ve started working on a PhD in addition to teaching full-time and managing my toddler, so I’ve been insanely busy! I have an amazing student teacher this semester, however, so I’m starting to delegate more. I’m hopeful that will free up a little more time and energy so I can get back to blogging and reading all the stuff I’ve missed. Perhaps these weather days will also assist with that!

    Quick Tip: Fallout 4 – “Get Rid Of Someone You Don’t Like” in Your Settlement (Without Killing Them or Using Cheats) [Suggestion, Text-Only Mode]

    Just wanted to share something that came up, in answering a Question someone asked in the Official Steam Forum for Fallout 4 – in case anyone has a Settler in one of their bases that they really, really don’t like…

    A person asked in the Forum, how to ‘get rid of’ Jezebel‘, whom for those who do not know, is a Robo-Brain type automatron, from the Automatron Official DLC. Without getting into any Spoilers, I’ll just say “she has an attitude”…

    However, because she is a Resident of your Settlement, you cannot easily get rid of her, as attempting to just kill her will set all of the other Settlers gunning for your head in retaliation/defense.

    Also, although she can be Assigned to the Task of, say running a Shop at the far end of Town and ‘stay there’, she is not of much use in that respect – because Robots cannot run Shops/Stores [sadly].

    I thought of using her to start a Supply Line (so her Task/Job will take her out of town almost all of the time and you’ll rarely ever have to see her) – and saw that another helpful Fallout 4 player thought of the same thing – and already posted it as a Reply in the Discussion…

    Still, I could add (as a Tip perhaps); that you can ‘send her away’ even more so by first Moving her to a Settlement that you rarely go to (using the MOVE menu bar command, at the bottom of the Workshop Mode interface).

    You could Move her to Oberon Station perhaps, or The Slog [those are where I normally send ‘people I don’t like’ lol] – anywhere that you normally don’t ‘check up on’ as much as you do your other Settlements…

    Then, after that, Assign her to become a Provisioner and start up a Supply Line (using the SUPPLY LINE menu bar command, in Workshop Mode) between the starting place of where you sent her (“far away”) and another place you rarely go to – that way, you will REALLY never have to see her again!

    [Actually, you may still run into her, as you run into your Provisioners if you journey into the paths between the Settlements you have Supply Lines set up for – but still, if you pick two remote places that you don’t really visit often as her Supply Line nodes (start and end points), then you’ll really rarely ever bump into her]

    Either way, I hope these ideas help any of you ‘get rid of someone’ you don’t like, from a Settlement (and you don’t want to kill them or use cheats/commands to do it). Have fun in Fallout 4!

    The Amazing Power of Focus

    I frequently like to put on music while I work, and I sometimes do that in my classroom, too. I’ve rotated through many Pandora playlists, and I use Spotify a fair amount. I like the music on those sites, but they’re more for entertainment than work.

    I’ve finally found a resource that really seems to help me and my students get into the zone and focus.

    Let me introduce you to my favorite new website, [email protected]

    This website allows you to listen to instrumental music from a variety of genres that has been specially selected to get you into a state of “flow.” The music is sequenced in an order that draws on neuroscience and research about the impacts of music on productivity. They have a huge section documenting the science behind the playlists. 
    I tried this site while reading some really dense texts for a PhD class, and I really felt like it helped me stay focused and productive. I cruised through the articles in record time! I also had it playing while I worked on writing this morning, and I do feel like it’s impacting my personal productivity. It seems to be helping my students as well. 
    They have two membership levels — a free version and a paid version. The free version gives you 60 minutes of each playlist before stopping. You can listen to the playlists multiple times, but it will always be the same playlists. The paid version allows you to set a timer, customize playlists, listen to unlimited music, and track productivity for $4.99 billed monthly or $45 billed annually. I’m currently using the free version, but I suspect it won’t be long before I upgrade. It’s having a big impact on my productivity. 
    If you like to have music on in the background while you or your students work, I’d definitely recommend giving [email protected] a try. I’d love to hear about your experiences with it in the comments!

    I like www.focusatwill.com so much that I’ve become an affiliate with the site. This means that if you click the links above and subscribe, I’ll receive a very small commission. Regardless, I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CRF, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

    Workout Anytime in Citizen Tribune

    Workout Anytime in Citizen Tribune

    WORKOUT ANYTIME was recently featured in the Citizen Tribune. The article explains the newest WORKOUT ANYTIME location coming to Morristown, Tennessee this October. It gives background on Steve James and Scott Elliot and how they came about the WORKOUT ANYTIME brand. The article also goes into further detail on the services at the gym and the owners planned community outreach.
    You can view the full article here. 

    INCREDIBLE HOME DESIGN WITH NATURAL LIGHT

    This 94 square meter apartment has a privileged location on the corner of the building. Looking for an apartment in well appointed with three bedrooms, one next to the park, with open views to the outside and green space overlooking the street, while the kitchen opens onto the courtyard and peaceful atmosphere. In the middle is a spacious hall and in relation to this, a new bathroom. The general plan with large windows on three sides and bright colors fill the room with light. It is difficult to decide which of these rooms, we love the most.

    INCREDIBLE LIVING ROOM DESIGN WITH NATURAL LIGHT

    INCREDIBLE LIVING ROOM DESIGN WITH NATURAL LIGHT

    INCREDIBLE DESIGN DINING ROOM WITH NATURAL LIGHT

    INCREDIBLE DESIGN DINING ROOM WITH NATURAL LIGHT

    INCREDIBLE DESIGN KITCHEN WITH NATURAL LIGHT

    INCREDIBLE DESIGN KITCHEN WITH NATURAL LIGHT

    INCREDIBLE DESIGN BEDROOM WITH NATURAL LIGHT

    INCREDIBLE DESIGN BEDROOM WITH NATURAL LIGHT

    INCREDIBLE DESIGN SKETCH WITH NATURAL LIGHT

    INCREDIBLE DESIGN SKETCH WITH NATURAL LIGHT

    Now on Instagram!

    I’ve joined in the Instagram love! You can now find me at Eberopolis on Instagram.


    I started using it on Wednesday, so I’m still new, but I’m making it a goal to post something (usually) classroom-related every day. Be sure to follow me so I can find all of my teacher-friends who are already there!

    Have a great weekend!

    “Can You Guess Where The Screenshot Below Is From?”, The Game Tips And More Blog’s Game Screenshot Identification Contest, Re-Starts Again Today! [Updated 2018-02-01 – Answer Image]

    It’s the 15th of the month – and it is time for something that I want to start up again (and not only because I have over 50,000 Screenshots burning a hole in my pocket, but mostly that) – something that I had going for a short time, three long years ago…

    The Next Installment of The Game Tips And More Blog’s ‘New-ish-sorta-but-not-really’ Contest:

    “Can You Guess Where The Screenshot Below Is From?”

    (A Game Screenshot Identification Contest)

    Having a ‘grand re-opening’ once again today – January 15th, 2018!

    All you have to do to win this contest, is contact me in any way you can (eg. Comment on this article
    below, Twitter profile tweet, email me or Comment/PrivateMessage TheBlog’s Steam Account by the end of the month, with these two items within your message:

    1. Your guess for the game the image is from.
    2. Information on how to contact you back (to receive Steam game gifts, etc) if you win.
    That’s it!
    **[Just a quick note to be careful not to include any information you do not wish to share ‘publicly’ when posting in the Comments area below or at Steam or sending a Twitter profile Tweet, as these messages are seen by ‘everyone’]


    Correct answers submitted by the end of the month (beginning at the time of this posting) will be chosen from randomly, where one Skillful Identifier will receive this month’s contest prize – which is: a gifted game from the Steam online store!

    [Note: Although I have been collecting Games on Steam over the past few Years, during Steam Sales,
    due to how Steam has changed Gifting games through Steam recently, you will have to temporarily become a Friend
    of TheBlog’s Steam Account (to receive the game – after receiving your Gifted Game, you may Unfriend of course)]
    Winners will also be announced in bold, large lettered-text, here on this posting and will thereby be immortalized on The Intertubes in perpetuity, proving to all other comers that you were “The Ultimate Game Screenshot Guesser Thingy Person” [aka. Gamer]!

    Previous Editions of this Contest [to ‘see how it works’] can be found at TheBlog, here:

    Can You Guess Where The Screenshot Below Is From – Contest #1
    Can You Guess Where The Screenshot Below Is From – Contest #2
    Can You Guess Where The Screenshot Below Is From – Contest #3

    Are you ready? Here then, is the Screenshot image for this month, below:

    [As you can see, the image is a portion of a full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

    Update!

    A week has gone by and there have been no correct guesses received yet… So, here is a HINT image; (an enlarged area portion of the Screenshot for this month’s Contest)! Ready?

    Here is the HINT image (with enlarged portion revealed), below:

    [Click the Image to see it at a slightly-larger Full Size – and as you can see, the image is a larger portion of the full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

    At the end of the Month, if noone has guessed correctly by then, I will return here and reveal the full Mystery Screenshot and the Game it was from – Good Luck, Gamers!

    Update!
    It has been two weeks since the Contest began and there have been no correct submissions! Aww….

    To end The Mystery, here is the answer for this month’s edition of
    ‘Can You Guess Where The Screenshot Below Is From’ (2018-01):


    The Answer for this month’s Contest could have been: “Marvel Heroes” or “Marvel Heroes Omega” or “Marvel Heros” or “I can’t believe they cancelled this great game that I only just recently discovered existed especially with all the future Marvel movies coming out what happened this timeline sucks”. Click to see Full Size

    Come back next 15th-of-the-month friends, when you can have another chance to be a Digital Screenshot Sleuth in the Fifth Edition of ‘Can You Guess Where The Screenshot Below Is From’ – and a chance to win the Prize that will be carried over to next time: a gifted game from the Steam online store!

    See You In The Games!


    (The Game Tips And More Blog Contest Game #2018-01)

    DESIGN ROOM HOTEL LE ROYAL MONCEAU

    DESIGN ROOM HOTEL LE ROYAL MONCEAU

    DESIGN ROOM HOTEL LE ROYAL MONCEAU

    Parisian palace since 1928, the hotel Le Royal Monceau offers a revival directed masterfully by Philippe Starck Different! Parisian palace Since 1928, The Hotel Royal Monceau Dining Room Offers revival has masterfully directed by Philippe Starck Different! It is the feeling that one can have by browsing the different areas of the vast Royal Monceau A desire a little crazy and infinitely poetic break with custom, to avoid chokepoints, to welcome the shift, and while cherishing the precision and perfection, displaying a fondness for the panache and daring, fantasy and excess It Is The Feeling That One Can Have by browsing The Different Areas Of The Will to VAST Royal Monceau sample christmas tree decoration and Slightly Crazy With infinitely poetic break custom, to Avoid chokepoints, to Welcome the shift, and while cherishing The precision and perfection, displaying a fondness pour la panache and daring, fantasy and excess.

    37 Avenue Hoche, 08. 37 Avenue Hoche, 08. Champs Elysees, 75008 Paris Champs Elysees, 75008 Paris

    Workout Anytime Featured in Franchise Times

    Workout Anytime was recently featured in the Franchise Timesin an article titled, “Nest Eggs: Done right, a rollover of retirement funds can be smart option”.

    The article is a trend piece on franchisees using their 401(k) to purchase their business. John Heifner, Workout Anytime franchisee, gives great insight into how he went about purchasing his Workout Anytime with the use of his 401(k). He went on to say “Starting our third year, I can start thinking about funding a retirement again instead of keeping my money more fluid for cash flow.”

    Click HERE for the full article or begin reading below:

    Nest Eggs

    Done right, a rollover of retirement funds can be smart option

    By: Jeffrey McKinney
    More franchisees are using their 401(k) retirement funds to finance the purchase of a franchise. Who should consider the move? Experts explain the do’s and don’ts, including warnings about strict IRS rules.

    Jeremy Turner’s decision to pretty much tap out his retirement funds to buy a Lawn Doctor franchise was very clear: He calls it the best option he had after banks would not lend him the money.
    Turner withdrew $70,000 from his 401(k) plan and another $30,000 he and his wife had in savings to start the lawn care business in St. Louis in 2010. Turner says he discovered companies charge around $5,000 to help complete the financing process. “I would not suggest that someone try to do this on their own because of tax and other risks involved,” he says.

    The carb connection

    Carbohydrates are a vital part of the human diet – they are our primary source of energy, and in their natural state they are turned into glucose to provide fuel for all the organs of the body.

    THERE ARE THREE MAIN TYPES OF CARBOHYDRATES:

    1. Simple sugars, or monosaccharides: glucose (blood sugar), and fructose (fruit sugar)

    2. Double sugars, or disaccharides: lactose (milk sugar)

    Diet Start

    3. Complex carbohydrates, or polysaccharides: starches and cellulose (potatoes, rice, grains and dietary fibre).

    The simplest carbohydrate of them all is glucose, which is assimilated immediately by the body. The more complex the carbohydrate’s structure, the longer it takes the body to convert it into energy – so ‘complex’ carbohydrates are the slow burners, because they are higher in more complicated sugars and fibre and thus take longer to break down into energy-giving glucose.

    So why are carbs the bad guys?

    Even though carbohydrates are a vital component of our overall health, there are certain carbs that serve no nutritional purpose whatsoever, and can even cause us harm if consumed too regularly and in large proportions. They are also the main contributors to the escalating obesity problem. So who are these enemies of our health and weight? They are known as refined carbohydrates.

    The problems started the minute we began to process our food and strip out the fibre and nutrients from flour and sugar, to make them look appealingly white. In so doing, we made them nutritionally redundant. Food processing removes magnesium, zinc and chromium from flour and sugar – the three minerals that the body needs to metabolize carbohydrates properly. It also drastically reduces vitamins B1, B2, B3, calcium and iron.

    Junk foods made up of refined flour and sugar, plus nutritionally empty processed fats, colourings, flavourings and preservatives, make up 75 per cent of many people’s diets. These so-called ‘convenience foods’ are ’empty’ calories, which hurtle into the bloodstream, play havoc with insulin and blood- sugar levels and actually deplete the body of essential vitamins and minerals that are needed to perform other important bodily functions. Processed foods have also been stripped of their fibre content, which is essential for controlling insulin production and protecting the body against diseases such as diverticulitis and colon cancer.

    NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

    NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

    Good ideas that we can see these concrete houses the Netherlands have been totally inspired and inspiring call to us to try. Most of the ideas that we can see the space was not available outside of this house. concrete material, which come from the use of brick and stone was looking for a huge ornate and extraordinary. We can try to come to our ideas to make this house looking for a pleasant as well as ourselves and our families.

    The concept of an interior provides ample room to combine the ideas. Integration space that stands between the living room, dining room and kitchen area is desirable for those who like social live and love to watch their children. These applications are rustic room in search of other great ideas that make us who see this house completely. The decorations of great gold bathroom also feel comfortable. Honestly, the more attractive space in this house was the place of these decorations ideas outdoor dining. Designed by Arjen Reas

    NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
    NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
    NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
    NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

    Workout Fuel Conclusion

    Workout Fuel Conclusion

    WORKOUT ANYTIME has been holding a month-long competition on our Facebook titled “Workout Fuel” where fans were asked to submit their favorite pre-workout and post-workout snacks. Each comment acted as a submission and each like on a fans comment acted as a “vote.” In our final week of “Workout Fuel” each weekly winner is going into a head-to-head competition. You the fans may vote on your favorite workout snack! You can vote here: http://bit.ly/WorkoutFuelFinal
    Workout Fuel | WORKOUT ANYTIME

    Deals and Sales: Saints Row 2 and Syberia II, TotallyFree™ [Notification]

    Update: As of Sunday, April 23rd, Saints Row 2 is no longer available for Free, but Syberia II still is

    I haven’t been feeling too great lately (hence my not posting for a while) – but I wanted to make sure and come and get a quick notification out, for those that don’t know and are interested – that I saw two games being given away TotallyFree™ right now:

    Saints Row 2, the open-world, GTA-style Action game is at GoodOldGames (now just GOG, they also offer newer titles these days), found at GOG.com

    and

    Syberia II, the third-person, mouse-driven Adventure game is being given away at Origin’s “On the House”, found at Origin.com

    Both are completely free, so go get them now! GOGOGO

    [Note: I do not get any compensation in any form for mentioning these games or companies here (there are no ‘referrals’ or ‘trackbacks’ in the links above); I am just a gamer who likes to share things I figure out and find on my own here, with you, other gamers… Have fun!]

    TestRun, Video Edition: Recording Gameplay – Rollercoaster Tycoon 2 (Video Samples with Brief Tutorial Video)

    This is a more informal TestRun, where I was merely testing out the perceived quality of some recording codecs while attempting to get gameplay recording of Rollercoaster Tycoon 2 going. As most of you know, recording this game is not just a point-and-shoot affair. Heck, most game recording applications won’t even detect the way it is buffering and utilizing video memory, resulting in a black screen, flashing or very laggy output. After trying years ago and abandoning it temporarily, I was recently searching websites with information on trying it again. With no luck finding a starting point of information, I decided to figure it out on my own – and of course share my findings should anything turn out fruitful…

    First, simply trying to record RCT2 with FRAPS and then Bandicam, turned up nothing as a result. Either it would not detect the screen (it is not using 2D/3D rendering/buffering on the videocard in a standard manner) or it would capture blackness (when trying Bandicam’s ‘Record The Screen’, for instance). Since these are two well-made recording products, I assumed other products would result in the same …result. I also seem to remember trying applications like Camtasia, back in the day..

    So next, I tried good’ol ‘Virtualbox’. A staple Virtual Machine emulator (think of a little computer-running-inside-a-computer), I installed an old version of WindowsXP that I had into the GuestVM. Installing my DRM-free purchase of RCT2 from Good Old Games, I tried recording the screen. No luck, since it wasn’t using Direct3D in a way that I could record (after I finally got Direct3D working in it). I tried playing it in a Windowed VM and recording that. It wouldn’t even run for some reason. It kept trying to ‘take over’ the VM and resizing it. I tried setting my Host Computer desktop resolution to 1280×720 and getting the game to detect that and run it at that resolution, ‘Full Screen’ and ‘Seamless’. Nope. For one thing, the game kept detecting and making available only the most basic of 4:3 aspect resolutions (CRT monitor type sizes), no matter what driver/settings I used for the virtual machine (I of course wanted the more modern widescreen 16:9 ratio, as YouTube uses).

    Third, I tried VMware’s ‘VMware Player’. A free virtual machine app, where the business version (VMware Workstation) is the go-to prog for business virtualization. Installing my XP and then RCT2 into the VM, I got it going in 720p rez and prepared Bandicam to record a “Rectangle On A Screen”. It worked wonderfully. So, with the odd stutter (very few and far between), I can now record RCT2 gameplay and wanted to share my findings of the ability with everyone.

    I was also messing around with different recording codecs, to see what they looked like at different settings with this game at 720p. I quickly threw together this little video showing some settings and results (Sample Video). A summary of what I have set up to record Rollercoaster Tycoon 2 gameplay is just below a short analysis of the video/recordings. Again. this isn’t a ‘full/technical’ TestRun, it is just me sharing some tests I did and showing that one can indeed record RCT2. Further down, there is a video that goes over the steps in summary, then in slightly more detail, showing the steps taken on the screen, a short ‘tutorial’ I suppose. For those who haven’t figured it out or got it working yet, perhaps this information will help you out, too. Enjoy!

    RCT2 testing (codecs/settings) with Bandicam (Samples)

    Recorded with: Bandicam, various quality settings, various codecs @ 1280×720 (720p HD)

    Recorded game: Rollercoaster Tycoon 2 (RCT2)

    Some recording data (per codec) for this test:

    MJPEG @ q80 = 45,000kbps data rate (~330MB per minute of gameplay recording)

    MPEG-1 @ q80 = 11,000kbps data rate (~80MB per minute of gameplay recording)

    MJPEG @ q60 = 34,000kbps data rate (~250MB per minute of gameplay recording)

    MPEG-1 @ q60 = 3,000kbps data rate (~22MB per minute of gameplay recording)

    *XviD and x264 are omitted as results for this test as editing/recompression resulted in corrupted video output (they will be included in a future TestRun with many codecs)

    Brief analysis of sample video:

    • All of the MPEG-1 settings are quite watchable, unless of course the temporal gibbs effects bothers you (the little ‘ghosty/glimmer’ effects that follow around the peeps). Perhaps if I didn’t mention it, you might not have noticed? As with all recording/editing, if it ‘looks fine to you’, then you can run with it if you want. Some people “need” the best quality possible, some can watch any quality and enjoy it. If the MPEG-1 setting at 80% Quality seemed fine to you, go ahead and use that (it is about 1/4 the size of the MJPEG recordings and I have found that editing MPEG-1 is bit slower but quite possible to do in editing applications such as Sony’s Vegas line of products).
    • The MJPEG at a Quality of 50 percent is watchable but messy looking, as expected since a JPG (MJPEG is a series of JPG frames) at only 50% quality would have tons of compression artifacts. 60% is just as bad, with ‘rough blocks’ everywhere (macroblock artifacting). MJPEG at Quality80 isn’t bad and very watchable, but it is much larger in bitrate usage/file size than say, MPEG-1 at the same quality setting (it is about four times larger in file size). It is the easiest codec to edit, however.
    • XviD, an MPEG-4 codec, can potientially looks a lot ‘cleaner’ as it can handle smaller macroblocks/divisions of the screen (inherent in the improvements in MPEG-4 over MPEG-1) – but the output seems to have strong corruption (it leaves ‘trails’ on the screen) when attempting to edit/recompress it into a final product (as seen in the video).
    • x264, a more recent ‘Advanced Video Codec’ version of MPEG-4, it records in wonderful quality and low file sizes – but all of that is hidden behind, again, corruption (‘trails’ left behind on the screen*) and slow editing.
      (The editing can be helped somewhat by specifying a smaller GroupOfPictures (frames inbetween keyframes/information frames, to help seeking through the video.)
      Keep in mind that for the MPEG-4 codecs, the corruption surfaces only when editing/recompressing the source video. The ‘original’ gameplay recording in MPEG-4 is quite clean and watchable, completely fine if you are just going to ‘record-and-upload’ to a video sharing site or personal website.
      *More on this issue and x264 recording in a future article
    • A full Codec Comparison TestRun is coming, where I test out a bunch of different codecs and see how they fare for general game recording, MPEG-1, MPEG-4, AVC/h264 (MPEG-4 Part-10), MJPEG, XviD, RGB24 and more…

      Some related articles:
      Game recording comparison with various codecs and settings (Minecraft)
      http://gametipsandmore.blogspot.ca/2012/10/testrun-video-edition-fraps-vs-dxtory.html
      The ghosting/blurring effect when rendering in Sony Vegas products
      http://gametipsandmore.blogspot.ca/2012/10/and-more-how-to-stop-ghosting-or.html

    There are a couple other ways to do it I think, but here is how I recorded Rollercoaster Tycoon 2 gameplay with Bandicam:

    • Install Windows into a VM Guest (for example, a VMware virtual machine within the VMware Player application)
    • Install RCT2 into that Virtual Machine, running the VM in a window (for example, 1280×720)
    • Set up Bandicam to record a ‘Rectangle On A Screen’ and set the Rectangle to be the same size as the Virtual Machine running in a window (in this case, 1280×720) and line them up. 

    That’s it!

    Tutorial Video on how to record Rollercoaster Tycoon 2 with Bandicam

    I had seen many people on many forums asking for years how to record RCT2 gamplay. I have seen a few videos online now and so some have it working, but if you haven’t been able to get it going or would like to try to make your own Rollercoaster Tycoon 2 videos, here’s how. Good luck with it and have fun!
    See you in the games!

    Innovative Office Furniture Sets Were Designed by Vitra

    These new and innovative office furniture sets were designed by Vitra and are basically practical approaches to the concept of “Citizen Office”.

    Innovative Office Furniture SetsInnovative Office Furniture Sets

    Innovative Office Furniture SetsInnovative Office Furniture Sets

    Innovative Office Furniture SetsInnovative Office Furniture Sets

    Innovative Office Furniture SetsInnovative Office Furniture Sets

    This term was invented by the company in 1991 and taken to another level with the furniture collections below. Jo Kaiser (manager for the North American branch) gave a statement which summarizes the idea of the project: “we believe you should use an office like you would a city”. In other terms- more comfort while making the most of the available space. Here is further information from the company: “A Citizen Office encourages the occupants to work using a range of postures and to move within the office as much as possible. Working while standing or assuming various casual postures provides variety and relaxation while maintaining employee health. The Citizen’s Office takes us a step further than traditional ergonomics – physical activity is integrated with office etiquette in a natural manner. “

    The Vital Acid—Alkaline Balance continue…

    Excess salt intake can also severely upset the body’s water balance. Along with potassium, which also occurs naturally in fresh foods, the sodium in foods and in salt itself (which is sodium chloride) plays an important part in the movement of electrons through the body’s water- based protoplasm. This is why sodium and potassium are known as electrolytes. Potassium tends to concentrate in the cells, sodium in the fluids outside the cells. The balance between sodium and potassium, when it is right, sets up a dynamic tension that makes it possible for the living cells to react quickly and efficiently to nerve stimuli, to exchange nutrients and wastes easily through the cell wall, and to maintain the proper interior and extracellular water balance. Too much sodium, which most of us get from eating salt, upsets this balance altogether and can cause troubles. It forces the body to hold on to extra amounts of water to make up for the extra salt one has eaten. Tissues become bloated, and this salt-caused edema can interfere with the blood’s oxygen transfer to cells as well as creating extra pressure against the blood vessel walls themselves. These are some of the reasons the Lifestyle Diet eliminates salt both in cooking and at the table. It relies instead on fresh and dried herbs, garlic, and spices for seasoning.

    Diet Start

    Throw out the Coffee

    Caffeine, a trimethylated xanthine, is found in coffee beans, tea leaves, cola nuts, and cacao, from which chocolate is made. Together with nicotine and alcohol, it makes up a trio of the most widely used psychoactive drugs in the world. The xanthines are stimulants to the central nervous system. They increase heartbeat rate, increase the volume and concentration of acid in the stomach, relax the smooth muscles in the body, raise blood lipids, stimulate the cerebral cortex (which means they heighten the intensity of mental processes), banishing drowsiness and feelings of fatigue. Caffeine and alcohol also have a diuretic effect on the system, causing frequent urination.

    The average cup of coffee contains between 100 and 150 milligrams of caffeine per cup, instant coffee somewhat less, tea between 60 and 75 milligrams, cola drinks between 50 and 60 milligrams. This means that if you are drinking four or five cups of coffee each day you are getting a dose of 700 to 750 milligrams of caffeine. To any pharmacologist a dose over 250 milligrams is considered large, although about a third of people in the West get twice as much each day and one person in ten actually imbibes more than 1,000 milligrams of the drug caffeine every twenty- four hours. The full long-term implications of drinking coffee (and, to a lesser degree, tea and cola drinks) are still not clear. However, enough is known already to inspire any woman concerned about the preservation of her health and beauty to give them up completely. For caffeine is a stimulus you do not need on a healthful low protein, low-fat diet high in unrefined carbohydrates.

    The link between caffeine intake and anxiety symptoms has been well established. Dr. John Greded, associate professor of psychiatry at theUniversity of Michigan, and his colleagues and others have reported that high caffeine consumers have statistically significant elevations in anxiety scores. The risk of developing peptic ulcers is also 1.4 times greater among coffee drinkers than among non-coffee drinkers. There is now evidence that coffee consumption by pregnant women can be dangerous to the unborn child Caffeine has been shown to cross the placental barrier where its mutagenic and perhaps even teratogenic potential may cause genetic changes and, therefore, birth defects.

    Finally, a daily intake of caffeine from coffee drinking is the same as continuing to supply your system with any other drug to which it has to adjust and which ultimately it has to detoxify and eliminate. One of the main principles of any long-term diet for health and beauty is, never add to the body anything which is not necessary and with which it has to deal. The fewer toxic substances there are, the less contribution they will make to tissue sludge, premature aging of skin, and the subclinical vitamin and mineral deficiencies which result in falling hair, breaking fingernails, chronic fatigue, and mental disorders. In the Lifestyle Diet, coffee, tea, cola drinks (even those without sugar), and cocoa are out. Instead, you can drink mineral waters, herb teas (but always in moderation since some of them in excess may not be good for you either), fresh fruit and vegetable juices, and coffee substitutes made from roots and grains.

    MODERN SWEDISH BEDROOM DESIGNS GO SROP

    Although they are all unique, and I noticed that some of the same elements that deserve to be underlined. First of all, all the bedrooms the images below, with large windows, which are usually thin stylish blinds or curtains. On both sides of a king-size bed is a traditional bedside tables, shelves or chairs for the original. The walls are painted mostly white, but here and there, you will find an interesting color interference: some of the rooms are nice backgrounds to illuminate the room. Details of lighting are particularly interesting to observe. Please take a look at this beautiful gallery bedroom and tell us what information you will find interesting.

    modern swedish bedroom designs

    MODERN SWEDISH BEDROOM DESIGNS

    modern swedish bedroom designs

    MODERN SWEDISH BEDROOM DESIGNS

    modern swedish bedroom designs

    MODERN SWEDISH BEDROOM DESIGNS

    modern swedish bedroom designs

    MODERN SWEDISH BEDROOM DESIGNS

    modern swedish bedroom designs

    MODERN SWEDISH BEDROOM DESIGNS

    Do you have Food Cravings? Food Cravings Test

    • Do you frequently eat until your stomach is uncomfortably full?
    • When you get hungry, does it make you feel tense, weak, or irritable?
    • When you get hungry, do you sometimes focus on one or two specific foods?
    • Do you snack often, usually eating the same snacks?
    • Have you ever had other addictive habits, such as smoking or drinking too much alcohol or overconsuming caffeine?
    • Diet Start
    • Are you often hungry after a meal and stay that way until you’ve eaten one of your favourite foods?
    • Do you usually need dessert after dinner to feel satisfied?
    • Do you tend to eat a relatively narrow range of foods?
    • When you eat your favourite foods, do you often intend to eat only a moderate amount, but end up eating a larger amount?
    • Do you sometimes feel as if you lack control over what you eat?
    • If you snack on foods other than your favourite foods, do you tend to feel unsatisfied?
    • Do you binge on food more than once per week?
    • Even if you know a food doesn’t agree with you, do you eat it anyway?
    • When you eat your favourite foods, do you frequently drift into an almost trancelike state of relaxation?
    • When you eat one of your favourite foods, does it generally improve your mood?

    If you answered yes to six or more questions, you are probably overweight. If you’re not, you must have a tremendous degree of willpower or an exceptional metabolism.

    When this happens, you will stop eating as much as you now eat, and your metabolism will heal. You will then begin to lose adipose tissue gradually, painlessly — and permanently.

    Fallout 4: High Resolution Texture Pack (Free DLC) Is Now Available [Notification]

    For those that haven’t heard yet, as mentioned last week at their site here, Bethesda has released a High Resolution Texture Pack, that is now available for free, downloadable via Steam.

    The graphic ‘upgrade’ includes ‘native 1440p’ textures [which means the textures themselves are 2560×1440 pixels in size – but remember, textures usually aren’t displayed at Full Size, they are squished into say, the sides of a gun, or a sign or other things in the world – even if they cover a large wall in the game, they will usually not display ‘at full native size’ – and even if they do, they can be repeated (“tiled”) to fill in the space of objects needed, in the game world – basically, 1440p textures should make the game look great]. It also includes Enhanced Draw Distancing and God-Ray tweaks [those glow-y, streaks of light, showing up especially when a source of light is behind something, such as the sun behind trees or buildings].

    Now, up until this release, I personally was playing with SweetFX a lot in FO4, having fun increasing Sharpness and Shading, dealing with the Aliasing, taking Screenshots and ‘Realistic Photos’ and ‘Close-Ups’ (with Depth-Of-Field, etc) of some of the Characters in the game. These can be found here, at a slowly-growing Flickr page I started for The Blog. A couple examples of these, taken with ‘SweetFX in ReShade’ are just below – I look forward to what the entire game could possibly look like with the new High Resolution textures!

    Fallout 4 – Mrs. Nordhagen, Settler I – SweetFX in ReShade
    (GTAMblog7Photo SweetFX Preset, made available Soon™)
    Click to see Full Size
    Fallout 4 – Mrs. Nordhagen, Settler I – SweetFX in ReShade
    (GTAMblog7Photo SweetFX Preset, made available Soon™)
    Click to see Full Size

    ReShade by Crosire (reshade.me)
    SweetFX by CeeJay.dk (ceejay.dk)
    Game Material by Bethesda Game Studios (bgs.bethsoft.com)
    Captured by Troy from The Game Tips And More Blog

    Since I don’t actually have room for it on any of the drives I have Games on at the moment [which seems to always happen when something cool comes out, of course], I will be moving some things around and uninstalling other games I am not playing at the moment, to make room for this big fella…

    It is an optional/separate “DLC” download, weighing in at a hefty 58GB installation through Steam. Once I get it going, I will be working on a QualityTest for it, comparing the graphic look between the two versions and what they really look like in-game – as well as the Performance Hit the Texture Pack creates – look for that coming post Soon™ if you are waiting to see what they look like or if it is ‘worth the download’; but if you can’t wait and want to get started seeing it yourself, go get it via Steam for free now, here.

    This free download, by the way, is – in Bethesda’s own words, “…a love letter to our amazing PC fans that have supported us – not just with Fallout 4, but across multiple decades and games…”. 
    Right back at ya’, Beth! 
    “Thank You” ~ Sincerely, The Game Tips And More Blog

    Header and Footer Images captured by Bethesda, from their example screenshots of the High Resolution Texture Pack

    The Nordic Hamstring Curl: Best Hamstring Exercise You are Not Doing!

    There are many different hamstring exercises including variations of leg curls (seated, prone, and standing) along with several different hip hinge exercises that target the hamstrings (RDL, Single Leg RDL, etc).     These are all great exercises, but none of them can touch the Nordic Hamstring Curl for building eccentric strength and preventing hamstring injury in sprints and sport!
    This is a tough exercise so warming up the hamstrings is essential.  Using other hamstring exercises first such as bodyweight hip hinges and light leg curls on a machine prior to this exercise do the trick nicely.   It is also a good idea to do some static stretches for anterior hips and hip flexors to shut them off which helps to allow for maximum hamstring activation.
    To perform the Nordic Hamstring Curl you need to find a place to hook your heels under when you are in a double leg tall kneeling position so you will also need padding under your knees.     If you have a workout partner you can have them kneel behind you and hold onto both your legs right above the ankles keeping their arm straight so they can use their bodyweight to apply load as you let your body fall forward like this:   http://willlevy.com/wp-content/uploads/2014/08/Nordic-Curl.jpg.     You can also find something to hook your ankles under like the horizontal bar from a weight machine or barbell like this:   https://i.ytimg.com/vi/f_GdZKdwovA/maxresdefault.jpg or  this:   https://s-media-cache-ak0.pinimg.com/originals/29/04/34/290434956cdd220cc8d6e0b18948cf3c.jpgor this:  https://www.t-nation.com/img/photos/2013/13-775-04/Nordic-Start.jpg
    Keeping your hips flat (straight line from knees through hips and shoulders) – you lower your body down slowly until you can no longer hold your weight then catch yourself in push-up position and push back up:  https://simplifaster.com/articles/wp-content/uploads/sites/5/2017/03/GHR.jpg.       You can also use a band during the exercise which provides progressively more assistance as you go lower towards floor to allow you to potentially perform the full range of the motion and come back up with the assistance of the band.    Then over time you gradually decrease the assistance of the band by user smaller and lighter bands.      This provides a good video of how you can do this by attaching a band overhead and behind you:  https://www.youtube.com/watch?v=LQm9rdzZlRk
    There are also numerous machines designed for this exercise including:
    http://www.roguefitness.com/floor-glute?prod_id=15905&gclid=Cj0KEQjwnazLBRDxrdGMx-Km4oQBEiQAQJ1q68P3rah0ZwofpsxOA-xSYl5_v9mtTSxSmuG5zIW1KUYaAvPW8P8HAQ
    http://www.speedbottraining.com/glute-ham-machine/
    http://www.gluteforce.com/
    Here is a 6 week progression:
    Week                   Sessions/Week                  Sets                       Reps                     Rest
    1                                           1                            2                            5                            2 min.
    2                                           2                            3                            5                            2 min.
    3                                           2                            3                            6                            2 min.
    4                                           2                            3                            7                            2 min.
    5                                           3                            3                            8                            2 min.
    6                                           2                            3                            9                            2 min.

    WORKOUT ANYTIME in Buffalo Grove Patch

    WORKOUT ANYTIME in Buffalo Grove Patch in an article titled, “24/7 Gym Opens in Buffalo Grove.”  The article opens with some details about the opening of the Buffalo Grove WORKOUT ANYTIME, and the plans to open up to 25 clubs in the Chicago suburbs. Jeff and co-owner Eric Nagel are quoted about why Buffalo Grove is a great place for the first WORKOUT ANYTIME in Illinois. Cristel gives details about what WORKOUT ANYTIME offers and about the upcoming grand opening, and then provides info and quotes from Steve and John.  Click here for the entire article or begin below.

    24/7 Gym Opens in Buffalo Grove
    By: Cristel Mohrman

    Workout Anytime might be a new name in town, but it’s one that company officials expect will soon be widely recognized.

    The fitness center officially opened Saturday at 700 S. Buffalo Grove Grove Road. It’s the company’s first location in Illinois, but it certainly won’t be the last, said Workout Anytime officials, who are planning to expand to 25 clubs in the Chicago suburbs.

    Buffalo Grove was selected as its first Illinois site for its demographics and because officials found little competition for the concept, which offers members all-hours access to no-frills workouts.

    “We really like this location a lot,” co-owner Eric Nagel said.

    (Read More)

    And More: A Simple Explanation Why ‘Loot Boxes’ May Be Considered “Gambling”, In Games Like Star Wars Battlefront II, Et Al… [Editorial]

    ((Portions of this article
    may or may not have
    information obtained
    from this unidentified
    Imperial Officer))

    Recently, in the game Star Wars: Battlefront 2 (EA, Dice), there was the introduction of “Loot Boxes”. These are purchasable ‘crates’ that can contain multiple items. These items are generated randomly (RNG, Random Number Generation) and are obtainable by using “RealLife™” Money [my superscript as pun] – and therein lies the problem being discussed.

    In an attempt to explain it simply on a Steam Forum Thread a few days ago, I posted the comment below. I replicate it here, to share with others, so that this whole ‘issue’ may be understood more fully:

    “If I may pop in, to explain the reason why “loot boxes could be considered gambling”; it is due to a few factors:

    – There is an RNG factor in the potential items from the Loot Boxes (the items are random, and some items are worth more than others)

    – The inclusion of the possibility of utilizing RealLife™ Currency to obtain them.
    [Because of this element, more than anything, it could possibly be construed as “gambling”…]

    – Because the items (1) can be exchanged in the game for other items that ‘cost RealLife™ Money (2), they are ‘gambling on the possibility’ that they will ‘save money’ if there are better/higher items in the Box purchased (i.e. they will ‘save money’ if the RNG produces higher/better items in the Box; they will not have to buy much more)

    Together, all three points mean the game essentially has “gambling” within it…
    I assume the reason why some parents are getting upset about it, is that there is a possibility of a Minor using their RealLife™ Money to obtain the Loot Boxes (in any game).

    The solution is simple however; remove the possibility of utilizing RealLife™ money to obtain the Chests/Boxes/etc OR the possibility of getting ‘better items’ that will ‘deconstruct into elements that can accrue to get better items’ (“saving money” if the better items appear via RNG) and there is no longer the possibility of it being “gambling”, as it were.”


    The above points, along with the fact that the ‘items’ can actually affect a players’ performance (i.e. a person with more items or better items can actually live longer or do more damage than someone without the items), is the sum of the whole problem that is upsetting many gamers, the entire issue becoming aflame in the recent release (Nov.17th) of “Star Wars: Battlefront II”.

    Other games (eg. “Team Fortress 2”), handle this concern for the most part by making sure that the items contained in their ‘loot crates’ are only ‘cosmetic items’ (hats, skins, costumes, etc) that do not affect player performance against other human players. It remains to be seen whether the “RNG Factor” involved in such ‘Crates of Loot’ in these other games, like TF2, are going to still become a ‘gambling’ issue, or not.

    Hopefully this helps you dear reader, in understanding the issue at hand and why some people are getting ‘up in arms’ about it at this time. 

    ~Troy from The Game Tips And More Blog

    12 Days of Fitness with WORKOUT ANYTIME

    12 Days of Fitness with WORKOUT ANYTIME

    Are you in need of a little inspiration to hit the gym this holiday season? Here’s a great workout routine to give a try this holiday season provided by the experts at WORKOUT ANYTIME. Enjoy! 

    Week 1

    4 days of exercise

    2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 
    2 days of body weight or weight training for 12 min per day
    Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

    Squats
    Push-ups 
    Walking Lunges
    Jumping Jacks
    Burpees
    Ab half roll backs (seated position, roll half way back, come up and exhale)

    Week 2 

    4 days of exercise

    2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with their moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 

    2 days of body weight or weight training for 12 min per day
    Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

    Pop Squats
    Push-ups w/alt knee
    Forward Lunges with bicep curl
    Plank Jacks
    Mountain Climbers
    Ab full roll up (lying position, roll all the way up, and exhale)

    Week 3

    4 days of exercise

    2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 

    2 days of body weight or weight training for 12 min per day
    Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

    Squat swing with overhead tricep press
    Spider-Man Push-ups 
    Reverse Lunge with bicep curl
    High Knees
    Shoulder push-ups
    Navy Seals (Ab exercise)

    Number Talks Book Study – Chapter 2

    The farther I get into the book Number Talks, the more excited I am about implementing them next year. This is such a great resource, and I’m only on Chapter 2!

    I’m linking up with Misty at Think, Wonder, & Teach for her fabulous book study. If you haven’t checked it out yet, be sure to visit her because she’s already offering some great resources to support the book (whereas mine are still works in progress!).

    This chapter walks through some of the nuts and bolts of setting up number talks, and it describes how to manage some of the procedures and expectations. One of the sections that really resonated with me in this chapter was about building accountability with the students. So often, there are a few students who are eager to share their mathematical thinking, and there are many others who are willing to sit back and let those students shine. I don’t like pulling sticks with students’ names for something like this, but I also don’t want students to feel like they don’t need to participate. This book offered some great strategies for dealing with that:

    1. Once all of the strategies have been shared, number them and have students show with fingers which one they found to be the most efficient strategy. This will get them thinking about the math involved.

    2. Keep records of the problems posed and strategies used, and label them with the students’ names. I plan to use my iPad to track this. I’ve talked before about setting up student data notebooks on Evernote, and I think that would be the perfect platform to track student participation. I can photograph students’ work and add anecdotal records about what I observe. It would also be easy to share with parents at parent-teacher conferences.

    3. Hold small group number talks throughout the week. As I prepare to transition into more of a math workshop/guided math approach, this seems like a very viable option.

    4. Create and post anchor charts of the different strategies that students are using. The book names a variety of strategies, or you could develop names with your students. Having the charts available to reference could scaffold the less confident students.

    5. Use exit cards. The authors recommend giving each student a notecard. On one side, students should record their solution, and on the other side, they should record a strategy that another student shared that they liked.

    6. Give a weekly computation assessment of 5-10 problems. The selected problems should reinforce the concepts and strategies introduced throughout the week. I can also imagine using an app like Show Me or Explain Everything to assess. These are whiteboard apps that allow students to record audio on top of their drawing. Students could record their solutions and narrate them as if they’re presenting them to the class. This would be another important artifact that could be saved in the student’s Evernote portfolio to share with parents or an RTI committee. If it’s only one problem, most students would be able to complete the task on the app in 5-10 minutes as the video they’d be creating should be less than a minute long.

    I think these accountability measures could be effective in getting students to participate more. Of course, the classroom environment will matter, too, and I look forward to setting those factors in place for my Number Talks this fall.

    In other news, I’m excited to share that I’ll be participating in Sabra’s book study of Word Nerds at Teaching with a Touch of Twang. Word Nerds explores strategies for teaching vocabulary to students, and it’s another fantastic resource. It’s published by Stenhouse, and you can preview the entire book online or you can purchase the book in Paperbook or Kindle edition.

    The book study starts on Thursday and runs throughout the summer. You can see the full schedule by clicking on the image above. I’ll be hosting Chapter 7, and I can’t wait!

    Also, have you joined in the Teacher Toolbox Trio Linky Celebration yet?

    You still have time to link up and be eligible to win a $25 Teachers Pay Teachers gift certificate! The linky celebration will close on Friday night, so be sure to join the fun. My wish list has definitely grown as I’ve seen all of the fabulous resources other teachers are sharing and recommending.

    CONCEPT INTERIOR DECORATORS NYC

    Interior Decorators NYC

    Interior Decorators NYC, there are many different benefits to live. Here, culture, food corners, training, and last but not least, the lounge and bar. If you want to spend a night in the city that never sleeps, then to New York City is a great bar, club and lounge, in particular to go. There are several rooms, and also spread throughout the city. live musicians are the best features of these lounges and bars. You can find indie rock band a lot of volume, and other local bands. Part of the show in New York City, a tremendously well. They are tastefully decorated, and the crowd, which is very appealing. These amazing living space in this late night to win the House, hip hop and youre likely to find one that will fit your musical taste.

    They offer large crowds and expensive liquor and very elegant. The interior decoration of these rooms are for lights, big boost mood of the series, in fact, people also benefit from seeing the crowd warm with loud music and too much light. Interior Decorators NYC always find some very funny and what’s better than a bar, club lounges and especially where you can make your night of fun. Once your stomach is full with the best drinks in the theaters of New York, then is time to rock and roll music and if so, what better than a living room and also in New York, where fun begins.

    In addition, these shows are also very useful during the time of the wedding reception. People are now tired of planning parties in hotels and other places. now part of wedding reception is poured into large halls, where people enjoy the maximum level. New York reception halls are simply incomplete without drinks. Here you can plan a cocktail, and also a bachelor party incurred prior to marriage. You can enjoy unlimited drinks which is great taste and you can also enjoy the loud music here. This part of reception or a cocktail can be fun with friends and other relatives. You know some reception includes dancing and fun, and this is the basic ingredient and that is what makes a great party for everyone. It is therefore the reception of the show is so famous in Interior Decorators NYC.

    Interior Decorators NYC
    Interior Decorators NYC

    The Benefits of Jump Training

    Watch a group of kids and you will likely see bobbing heads – kids love to jump and there are good reasons for them to jump.   A key aspect of human movement is learning to store energy and then reclaim it as part of a movement cycle. For example up to 40% of the energy required for movement during walking and running is created by storing energy in the leg muscles as the foot lands and then using it during the push-off phase.  The technical name for this cycle is the “Stretch-Shortening Cycle” or SSC.  The SSC takes advantage of the fact that muscles can act as springs:  they store energy as they are lengthened then rebounding in the opposite direction as they get shorter.

    Efficient movement takes advantage of the stretch-shortening cycle and muscles are designed to store and release energy in a rhythmic pattern of loading and unloading just like loading and unloading a spring.  In addition, power for all athletic movements is generated by taking advantage of the SSC.     A key aspect of getting the most from this cycle is rhythm and timing which are learned through repetition.
      
    There are three distinct phases to jump training:

    The Loading Phase – such as landing phase of walking and running where the muscles lengthen under tension to absorb the landing.
    The Amortization Phase – where the muscle transitions between loading phase and the Unloading phase.
    The Unloading Phase – where the muscles shortens and transfers the stored energy externally like a spring recoiling such as the push-off phase of walking and running.

    Jumps can be little – like jumping rope or big – like box jumps.  Start with little jumps.  A great place to start is jumping rhythmically in place with both feet with short fast jumps.   You want to land on the ball of the foot and flex your knees when you land and let your heels just kiss the floor then jump up again and repeat.  Start with really tiny jumps and try to let the elasticity of your calf and quad muscles do the work – done properly it should feel relatively easy.   It will take several weeks to condition the muscles of the foot and calf to be able to do longer sets so take your time.  In addition there are many benefits to performing this training without shoes so the muscles of your foot get conditioned and you have a better feel of the ground.

    It is also important to insure your knees track over your toes and do not collapse inward so do short sets (30 seconds or less) of low, fast jumps on both feet and learn to feel the rhythm of the cycle of landing and push off.

    Once you master this you can add more height to your jumps after you are warmed up.   Stop each set if you start feeling tired or feel unstable, and recover completely between sets.  Do NOT do jump sets to failure. Eventually you can progress into full squat jumps.   However remember the key to capturing the benefit of the stretch-shortening cycle is a quick rebound after landing.  So if you go too low in the loading phase the pause between landing and rebounding will be too long and you lose the benefit of the stretch-shortening cycle.

    Over time you can even progress to single leg jumps or box jumps where you jump down off a height to the ground/floor then land and rebound up.  Take these progressions SLOWLY – it is important to build the elastic strength of the muscles in your foot, lower leg, and thighs over time and stopping BEFORE you are exhausted will prevent injury.  This is why kids naturally like to do short sets of jumps repeatedly – it feels good when done properly!

    There are many benefits to jump training including:

    Toning the lower body – jumping recruits all of the major muscles of the lower body while at the same time being the ideal stimulus to build bone strength.

    Jumping burns lots of calories – once you can build up to being able to do 1 – 4 minutes of continuous jumping like jumping rope you can really rack up the calories!

    Jumping pumps up the cardiovascular system – as above once you can jump safely and in good form for 1 – 3 minute sets you will not believe how high your heart rate gets!

    Jumping also demands great balance and stimulates fast-twitch muscle fibers.   Fast-twitch muscle is the type of muscle we lose quickest as we get older.   Fast-twitch fibers are not just important for athletes – they are important for preventing falls because the ability to produce force quickly is important to be able to react quickly when your balance is unexpectedly challenged like stepping off a curb you do not see!

    Jumping is the best way to build the strength of bones – bones need impact and force to stay strong. The key is starting with small jumps and gradually building the height of jumps and time spent jumping.

    There are many ways to build jumping into a workout such as doing some skipping drills which can even be done on a treadmill safely once you get the hang of it.


    It is also worth working with a trainer to help you develop proper jumping mechanics and the stability you need to land properly which are pre-requisites for safe and effective jump training.

    Gain weight especially fat: Here’s what make you do

    1. Food reactions cause fluid to surround invading food particles. When food macromolecules are identified as foreign invaders, your body launches the inflammatory response, which includes flooding an area that’s under attack. Your body will hold onto this water as long as reactive food substances remain in your tissues. This water dilutes these substances and reduces their effects, but at the same time the cells and tissues swell with water. This often accounts for swelling under the eyes and chin, in the hands, feet, ankles, and midsection.

    2. Food reactions release hormones that cause fluid retention. To offset the effects of the allergic inflammatory response, the body produces hormones, such as adrenaline. But these hormones cause water retention. The adrenal hormones cortisol and aldosterone increase sodium uptake, and sodium attracts water to cells and tissues.

    This action also triggers other hormonal changes, apparently through effects of the pituitary gland, which orchestrates your body’s ‘hormonal symphony.’ These other hormonal changes may include excessive secretion of anti-diuretic hormone, which causes fluid retention. Anti-diuretic hormone is also often secreted in response to stress, and is commonly released by women as part of premenstrual syndrome. The female hormone estrogen, which can be affected by food reactions, also increases water retention. Furthermore, growth hormone, which helps boost the metabolism, can be depressed by food reactions.

    Diet Start

    Besides these hormones, which circulate throughout the body, food reactions also have strong effects on certain gut hormones (including cholecystokinin and somatostatin), which can cause water retention and swelling directly in the gut tissues. Sometimes, when people experience immediate abdominal swelling after eating, it is due to the influence of gut hormones.

    Because women tend to have more problematic hormonal profiles than men, the hormonal elements of false fat tend to be worse for them. For example, when some menopausal women are given extra hormones, their bloating and swelling increase.

    When people stop eating their false fat foods, however, these hormonal problems usually stabilize quickly.

    3. Food reactions make intestinal membranes swell. There is often pronounced swelling of intestinal membranes, in response to irritation by allergens and in response to hormonal imbalances. This can account for the ‘pregnant’ look that often characterizes false fat. The result of this type of swelling is a feeling of heaviness and congestion in the abdomen, particularly in the small intestine.

    4. Food reactions disrupt cell chemistry, causing fluid storage. Food reactions cause a condition called cellular acidosis, which harms cell chemistry and results in fluid retention. Here’s how it works. The inflammatory response, caused by food reactions, causes calcium and sodium to enter cells, and this attracts water. It not only causes swelling, but also depresses the function of the cells’ energy centres, or mitochondria. When the mitochondria are disturbed, it saps your energy.

    This action also causes even more release of the stress hormones cortisol and aldosterone, which try to correct the chemical imbalance. But this in turn just causes more fluid retention.

    Furthermore, as the food reactions subside, the cells release all of these acidic chemicals into the tissues. This can cause a new round of inflammation and the release of even more protective fluids. Over a long period of time, this tissue acidity can contribute to the onset of degenerative diseases, including arthritis.

    5. Food reactions cause capillaries to leak fluids. As you may recall, many food reactions release chemicals, such as histamine, that make blood vessels expand and contract, in the process leaking fluids into tissues. This leakage of fluids causes further inflammatory reactions, with accompanying swelling. Sometimes this swelling can impinge upon nerves and cause aches and pains. It can also cause hives, due to the swelling of capillaries near the surface of the skin.

    Often, when this fluid leaks out of capillaries, it carries protein with it. This protein in turn attracts sodium, which causes even more fluid retention. The combination of sodium and fluid outside the cells can ‘smother’ cells by making it harder for oxygen to reach them. This contributes to further cell malfunction, and even to the death of cells.

    When cells die, even more water is drawn to the area to flush away the dead cells.

    6. Food reactions cause gas production. Food reactions allow the proliferation of abnormal bacteria and yeasts, and these factors lead to fermentation of food. Fermentation, primarily of carbohydrates, forms wind or gas, including methane.

    Secondarily, it creates by-products of alcohol metabolism, such as the chemical acetaldehyde, and alcohol itself. Both of these substances can impair mood and cognitive function when absorbed by the body.

    Food reactions also tend to slow the natural squeezing of food through the digestive tract by the bowel-muscle process of peristalsis. When food transit through the bowel is slowed, more gas and fermentation products are produced. Also, this `constipation effect’ causes more irritation of the bowel lining. This can create even more gas and can also contribute further to leaky gut syndrome, allowing reactive macromolecules to slip through the intestinal wall.

    Bacterial overgrowth in the small intestine also causes fermentation and gas. This causes pressure and discomfort in the small intestine, because the small intestine is relatively narrow and doesn’t have much room for expansion. Another major contributor to gas buildup in the small intestine is lack of the digestive substance hydrochloric acid, which is abnormally low in approximately 70 per cent of all people over 60. Hydrochloric acid, or stomach acid, also tends to be chronically low in people who are under stress, in people who eat lots of processed foods, and in people with food reactions.

    Gas formation is also increased by use of anti-inflammatory drugs, such as aspirin, which irritate gut mucosa. It can also be exacerbated by antacids.

    In addition, poor digestion also causes increased excretion of the amino acid taurine, which lowers cellular magnesium and slows peristalsis, resulting in more intestinal gas.

    Lastly, women’s menstrual cycles upset hormonal balances, and this also impairs peristalsis.

    All of these factors are insidious. They feed off one another and contribute to bloating and swelling. The result of this entire range of forces is a swollen, distended belly and puffy, spongy flesh all over your body. Until now, you may have thought that this was fat. Now you know it’s not. It’s false fat — and you can get rid of it in a week or less if you make the necessary effort.

    I’m sure you can do it! Every day that you make the effort, you’re going to feel a little better. You’ll look better, too.

    MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

    Hülsta German Furniture Maker showed some really incredible ideas of life that may be adopted by the style-conscious people who want to give their house a futuristic look and ergonomic. The perfect blend of stylish design with bright pink and black give the whole to create a very refreshing, but a look of the space age. The leather was added to an authentic touch and royal with a minimalist effect adding to the “cool factor”. You can either go all black look metallic or deliberately throwing red and white, while maintaining the class and elegance.

    LIVING ROOM LAYOUTZ FROM HÜLSTA

    LIVING ROOM LAYOUTZ FROM HÜLSTA

    MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

    MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

    LIVING ROOM STYLE LAYOUTZ FROM HÜLSTA

    LIVING ROOM STYLE LAYOUTZ FROM HÜLSTA

    LIVING ROOM LAYOUTs DESIGN FROM HÜLSTA

    LIVING ROOM LAYOUTs DESIGN FROM HÜLSTA

    Planetside 2 – Video Tutorial: How To Attack and Defend a Facility – Bio Lab (Subtitled) [Short Version]

    In this brief Tutorial focused on New Players to Planetside 2, I present concepts to attacking and defending a large facility with multiple objectives, such as:

    • capture points
    • shields
    • generators
    • spawn rooms
    • terminals
    and more…
    In the video below, I am playing on the New Conglomerate FACTION. I CAPITALIZE full words that are either important structures and names to remember, or are important concepts to learn for battle.
    During this battle at a large base, I show briefly how to use your HUD (Head Up Display) to locate OBJECTIVES, what some icons on the screen represent, where major structures are and important areas and aspects of the base.

    Although my FACTION successfully takes over a Bio Lab, many of the concepts presented in the tutorial will carry over to battles at other large facilities, such as Amplifier Stations and Technological Plants.
    [A separate tutorial for an Amp Station can be seen here:
    http://gametipsandmore.blogspot.ca/2012/12/planetside-2-video-tutorial-how-to.html]

    With subtitles over sections of a Bio Lab battle, playing as the NC (New Conglomerate), I go over some concepts a few times to make sure they set in for New Recruits, but for the most part, I stick to the main objectives of the base and how to quickly locate them, as well as the various ways to get inside..
    Enjoy and See You In the Game!

    Paperless Mission #8: Conduct and Archive Running Records (iPad)

    This is the eighth installment in my Go Paperless! Challenge series. You can see the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

    Mission #8: Conduct and Archive Running Records 

    At least once each six-week term, teachers at my school are supposed to conduct a running record as a guided reading level assessment. We use the Fiction Level Reading Assessments provided by the Teacher’s College Reading and Writing Project, and before my move to paperless, this system was a mess for me. I’d have one binder that was all the student copies of texts, and then I’d have a huge paper pile of blank assessments that I could fill in as I worked with students. Invariably, I’d have a ton of kids reading on level S, for example, and I’d run out of my copies of that assessment, so it was back to the copier to make more. Then I’d have to deal with recording the data and filing them all, and it was a bit of a nightmare.

    Paperless rocks. The nightmare is over.

    In this tutorial, I’ll share how I’m using Dropbox, GoodReader, and Evernote to conduct running records anytime and anywhere on my iPad. You might want to get a good iPad stylus, too, if you like that “pen in hand” feel.

    Step 1. Download all of the running records to a folder on Dropbox.

    You will also want to print one student copy of each assessment. I still keep all of those in page protectors in a binder so I can hand one over for the student to read off of, but I never make copies of these. It’s a one-time paper expense that I’m happy to live with.

    Step 2. Import the guided reading assessments into your GoodReader app.

    Once you’re done saving them to Dropbox, open up GoodReader and connect to DropBox. There’s more information about this in the previous GoodReader tutorial, Mission #6.

    Step 3. Choose the appropriate level, and open up the teacher copy in GoodReader.

    The first time that you want to annotate the document, you’ll be prompted to “Create an Annotated Copy” or “Save to This File.” You will want to choose “Create an Annotated Copy” so you don’t lose your blank copy. Otherwise, you’ll have to download these files every time you want to use them, and that’s only marginally better than running to the copy room — trust me.

    Step 4. Use the annotation tools to mark up student reading as you normally would. 

    I won’t lie — the first couple times I did this, it felt a little awkward. You have to remember to save the document if you’re switching between tools or trying to scroll/resize. But it does get better quickly, I promise! The more you use the tools, the more fluid your movements will be. It didn’t take me long to get back to the level of proficiency I had with paper copies, and while my writing is a little messier on the iPad, it definitely gets the job done.

    Step 5. Rename the file using the manage files option on the home screen of GoodReader. 

    To get back to the home screen, tap the center of your screen — away from any annotations — and it should show you the main menu or “My Documents” up at the top left.

    Step 6. Move the renamed running record over to the student’s notebook in Evernote.

    To get there, go into Manage Files again, and then select Open in. . . 

    You’ll be prompted to flatten annotations. Make sure you choose this or your annotations may be lost. 

    Select Evernote, and it will launch your Evernote app. From there, you can move it into the appropriate notebook and type in any notes that you want to remember about the student’s reading.

    Extra Credit: Create a simultaneous audio file in Evernote.

    This is something that I’ve been playing around with lately, and I think the possibilities for this are amazing. Once I have everything set up so that my student has the student copy of the text and I have the right running record file open in GoodReader, I go into Evernote, open a new note, and start an audio recording using the microphone icon. I tell the student to start, and then I use 4 fingers to swipe quickly from right to left across my iPad. This takes me back to GoodReader (or whatever my last open app was) without having to go through my home screen. When the student finishes, I use the 4-finger swipe in the opposite direction to pause the recording.

    In the end, I have an .mp4 audio file of the student reading in addition to my annotations on the running record. This is great because it’s evidence I can use in RTI and parent-teacher conferences, and it also enables me to play back the audio so the student can hear him or herself read — something that rarely happens. We can then talk about patterns I’m noticing and ways to improve reading fluency. It’s a great teaching tool.

    Your assignment: Try doing a few running records on your iPad and leave me a comment about how it’s going. I’d love to hear other ideas or suggestions to fine-tune this process, too. I’ve only been doing it for about 6 weeks, so I know there are things that could be improved. Hopefully this is enough information to get you started, though!

    Thanks for reading!

    WORKOUT ANYTIME on WYFF Greenville

    WORKOUT ANYTIME on WYFF Greenville

    Jennifer Young and Laura Stokes of WORKOUT ANYTIME Easley were recently featured on two segments on WYFF Greenville. The segments focus on easy holiday workout tips, and Jennifer and Laura do a fantastic job talking about the different services and facilities offered at WORKOUT ANYTIME
    View the segments here and here. 

    SWIMMING POOL DESIGN IDEAS GERRR……

    SWIMMING POOL DESIGN

    SWIMMING POOL DESIGN

    Here are some tips on how to keep your energy bill is lower and save valuable resources of the Earth at the same time.

    * Heating your swimming pool: Depending on where you live and heat that is during the spring months and summer, you may not need to heat your pool as often as you think. The houses are in hot desert climates and do not need to heat the pool at night or when he decided to entertain. By heating the water, taking into account alternative methods of heating used to heat water. Energy from solar panels on your home is an excellent way to harness the sun’s energy to heat your pool.

    * Cleaning the Pool: Many use automated equipment, which operate in the pool when the pool is empty. While helping to keep the pool clean when you’re in, but also the use of electricity 24 hours a day. Try to reduce the frequency to an automatic cleaning to be used. Also choose to use less chlorine, and to consider alternatives such as cleaners, detergents, ozone. Keep the cover over the pool when not in use also helps keep the debris in the air cleaner, leaves and twigs.

    * Keep all plastic and vinyl toys away from the game: Even if I do not believe that the maintenance of the environment around the pool with pool toys the child is also important. Many pool toys are made of vinyl or PVC, also known as polyvinyl chloride. These types of toys, release toxins and chemicals hazardous off-gas. Try to select the pool toys that are made from natural organic materials and the safety of your children, and help keep the pool a greener place to play in.

    * Use other sources of water in your pool: In your geographic area, using other methods to collect water in your home into account. Options could include rainwater that can be used to fill your pool, and the plumbing in your home for showers, baths, basin and toilet. This measure can help you reduce your water bill and conserve water on Earth. For many municipalities, geographic, you can earn additional benefits by LEED, or the benefits of saving tax on income tax time. Greywater reuse for your home is a viable option for many homeowners.

    Owning a pool should be an enjoyable experience, after all, you deserve to relax and entertain in the warmer months of the year. Despite owning a pool should not be at the expense of its portfolio, the precious resources of the Earth or the health of your family. Follow these tips to green the pool and enjoy all the benefits of reading and resting in the sun.

    SWIMMING POOL DESIGN

    SWIMMING POOL DESIGN

    SWIMMING POOL DESIGN

    SWIMMING POOL DESIGN

    SWIMMING POOL DESIGN

    SWIMMING POOL DESIGN

    In One Sentence™ – A Battlefield Hardline Main Weapons Overview [Very Short Reviews Of Each, Currently Text-Only]

    [In light of the DOUBLE XP EVENT going on right now for Hardline, I wanted to get this hopefully-helpful information up right away for everyone – so here it is without any Screenshots yet – I am collecting some together and plan to place them in-line within, Soon™]

    In One Sentence™


    A Battlefield Hardline

    Main Weapons Overview


    By: The Game Tips And More Blog


    Presented in a Document-sorta-but-not-really format

    I was in the Battlefield Hardline Beta, but didn’t write about it at the time [and have only played off and on since then ‘for fun’ – that is, not really getting into collecting information for others, that they could use – well, other than one Introduction To The Sabotage Gadget tutorial I did quickly a while back… I wish I did more, but I wasn’t feeling up to it, sorry all..].


    Recently, I was testing out Origin Access (signing up for one Month, to see if you ‘lose’ things you have Unlocked/Earned after Cancelling the Subscription – which I will write about once it expires) and I have been playing a bit more as well [as I can], wanting to go through each Weapon in Hardline and give a really short ‘Review’ of each, to give everyone a Basic Overview of them – I dubbed these ‘mini-reviews’ the highly-creative-and-original “In One Sentence”™!

    Here then, is a listing of all of the ‘main’ weapons in the game, that is, the Primary (eg. Rifles) and Secondary (eg. Pistols), the Thrown (eg. Grenades) and Melee (eg. Knives) categories, with a one-sentence ‘review’ of every single one of them – at least for all of the ones I have Unlocked and have available since starting Origin Access [which opened up all of the Expansion Weapons – there are only about 3-4 types missing out of all of them now… I may ‘tweak’ the descriptions over the next little while but other than small phrasing changes and adding Images later, this is the list, ready to go.]

    The list itself is divided into the Classes available in the game, listing all Primary and Secondary weapons available to that class to Purchase and Use, roughly as they appear on the in-game Menu Lists, with the Thrown and Melee weapon categories at the end. As such, there are some overlap/duplicated entries when written in Text form (eg. a pistol found in the Professional list will also be listed in the Operator list, if they both can use them, with the same or nearly the same Review/Overview for each listing). This way though, you can just skip to the Class section you are interested in playing and see the Weapons as they appear in the game, not having to worry about searching for the Weapon name itself.

    I would like to do the Gadgets (Class Special Tools) as well, sometime in the future – but for now, enjoy these little summaries of the Main Weapons available, to give you an idea of them if you are a newer player, or to help you in finding something that fits your playstyle (eg. perhaps you want a ‘slow and hard-hitting’ weapon or perhaps you prefer a ‘fast-shooting with lighter damage’ one, and so on) – hopefully this information will help you out in some way, especially if you are new to Hardline (I have already seen an influx of new players since recent EA/Origin Sales, which is great to see). Enjoy, dear reader, and get in there for the Double XP Event on now – and See You In The Game!

    Rating Key (if applicable to weapon, when used):

    ? = Not sure [yet] if they are Criminals-only or Cops-only usage

    * = Weapons I ‘Liked’ (fit my playstyle(s), is unique in some way)

    ** = Weapons that are A Personal Favourite (I use a lot or ‘mainly’ would use)

    Scout Elite = A fairly fast-shooting and silence-able sniper rifle with medium-high damage, this Default Professional weapon only improves with Unlocks. **

    R700LTR (Cops) = A slow-firing but powerful killer that is silence-able, Magnum Rounds can be Purchased after 50 Kills to make Vehicles cry. *

    AWM (Criminals) = Feeling much slower than the Scout – but also seeming more powerful – the first thing I would want to unlock is the silencer for this big boy.

    388-Recon = Feeling like it has decent ‘punch’ and good range – if the Scout is “fast” and the AWM is “slow” then the 388-Recon is “middle-of-the-road”, in terms of rate of fire, it seems. *

    .300 Knockout = What was once a fast and sleek one-hit-kill-machine, worthy of its’ lengthy and difficult Unlock, this rifle has since been Nerfed™ with a slower firing rate and its’ one-hit-kill ability taken away – and while still powerful and silent, to those who used it in it’s former glory, it is now a slow and decrepid version of it’s former self.

    AWS = A pre-silenced but slower-shooting, medium-to-long range rifle, with what feels like medium-ish damage, even though the in-game listing has it as “high damage” –  perhaps this one gets better after a few Unlocks, it felt pretty under-powered and a little inaccurate to me (but this could be the slower bullet speed due to the built-in silencing barrel).

    M98b = This bolt-action sniper rifle packs a mean punch – it has so much power it can shoot pilots inside helicopters [I’ve done it! Once! lol] and has very little bullet drop-off – it can even be silenced, but it can it ever be equipped with a Straight-Pull Bolt (to allow you to shoot again without going out of scope) and its firing rate is pretty slow.

    M1903 = This World-War-II-era rifle, reminiscent of Saving Private Ryan, comes ‘pre-loaded’ with a Straight-Pull Bolt (allowing you to shoot again without going out of a scope, which Unlocks in 20 kills) and can eventually Unlock a Silencer after 50 kills – but even though I read it is supposed to be powerful against vehicles, it shoots a little too slow and does too little damage to infantry, for my personal liking – maybe you’ll have better luck with it.

    SOCOM16 (Cops) = A medium-damage semi-automatic rifle that can be silenced, it feels somewhat inaccurate – but it does have the ability to fire quickly.

    SR-25 ECC (Cops) = A semi-automatic rifle that can be silenced, its decent damage along with its fast firing rate will make this a formidable weapon to use, if the medium-low recoil (which feels less than the SOCOM16) can be accounted for. *

    M82.416 = Even though the firing rate of this un-silenceable rifle has been severely reduced since I last played with it in Hardline (with the ability to fire a number of times a second back then), it remains quite the hand cannon (firing about once every second now) – with so much power there is very little bullet drop (and it can still take out pilots inside helicopters) – I think it did more damage back then too, but it is still nice to use for the sense of power it brings. *

    RO933 M1 = A silence-able rifle that seems to be able to fire as fast as you can click, I like to run this one with an Infra-vision scope, hide in the bushes – and let the bullets fall like hail upon the enemy from the shadows. **

    SAIGA .308 = A fast-firing rifle, this one ‘feels fun’ to run with even though it is a little inaccurate, because it has decent damage output. *

    PTR-91 = A rifle with mediocre damage, its’ fast fire rate can make up for it, if the medium-ish recoil can be compensated for.

    SP-AR = Although fast-firing, this rifle isn’t very accurate while doing so, with its’ high recoil – at least it as a neat, unique ‘report’ [sound].

    M1A1 = Although it can never be silenced and therefore will always give your position away when you fire, you probably wouldn’t want to silence this variation on the “Tommy Gun” as it is a pleasure to listen to the unique, heavy-hitting sound this World War 2 staple makes – it is slow to reload but has a decent firing rate and decent punch. *

    Mp7 = Although this silence-able PDW shoots very fast, you have to be in Close-ish Range or else you’ll just be burning through your ammo.

    MP5SD = This pre-silenced SMG is fun as hell to use, with its’ fast firing rate, good accuracy and decent damage; I like to run this with an IRNV scope and Extended Magazines, staying on the edges of the area, never letting the enemy know what is raining bullets down upon them until it shows up on the Kill Log. **

    M1 = The World-War-2-era M1 is a unique rifle that is fun to play and easy to use, with its’ high accuracy and unique report [sound] – if only it could be scoped (and silenced).


    RO933 BLK = [N/A, Haven’t Unlocked Yet, sorry]

    M110K5 = [N/A, Haven’t Unlocked yet sorry]

    1887 = Although powerful, this old-west-style shotgun feels slightly slow when compared to its’ modern-day counterparts – but it is fun to spin it end-over-end a’la Terminator 2 style to reload, once you unlock the ability to Saw Off the Stock. *

    MAMMOTH GUN = [N/A, Haven’t Unlocked yet sorry]


    SYNDICATE GUN = [N/A, Haven’t Unlocked yet sorry]

    A-8s = With only one arrow to fire and a looong reload time, the “Harpoon Gun” can still be a blast to play with, as it is fun as hell to kill someone with this unique weapon that won’t make you show up on the mini-map at all – it is just that you will probably die too (while reloading). **

    G18C = Although fast-shooting, this pistol feels a little inaccurate.

    93R = With good accuracy and higher damage, this little bad boy can even be silenced, eventually. **

    MAC-10 = While the recoil will have you shooting at the sky for the most part, this little guy will spit out bullets and damage faster than a shaken baby spits out broken teeth to make up for it – it’s just that you may be out of ammo before the enemy dies.

    MP9 (Cops) = Surprisingly accurate if you can compensate for the recoil, this little fella doesn’t have much in the way of scopes, but it can be silenced after 90 kills. **

    TEC-9 (Criminals) = Although fast-shooting, this little guy isn’t the most accurate puppy in the litter (but if you use the sights it does help) – it also doesn’t do the greatest damage, it seems.

    IMPROVISED GUN = With decent damage output, decent accuracy and a nice ‘feel’ to it, this little fella is fast becoming a Personal Favourite. **


    DUAL VZ.61 = Holding two of these “Czech Uzis” akimbo, you will feel like you are in a John Woo movie – only the inaccuracy will force you to run up close to everyone – but it will be fun doing it. *

    T62 CEW = Only one word for this one-hit-disable, “non-lethal” (it counts as a ‘kill’ for Patches and Assignments) weapon that makes all others respect your authority: Fun. **

    TRACKING DART = The Tracking Dart is mainly for ‘tagging’ opponent vehicles so that they can be seen by literally everyone – and RPGs will ‘lock on’ to them too – it even works on people! *

    FN57 = While this little guy shoots fast, it doesn’t seem to do a heckuva lot of damage – getting fast headshots makes up for it though. *

    G17 Race Pistol = A great little dealer of damage, it can shoot as fast as you can click – too bad there are no options for scopes or silencers whatsoever. **

    870P MAGNUM = Although this is a slower-firing pump-action style shotgun, it has very high damage output and a little bit of range, too. *

    SPAS-12 = While still a pump-action shotgun, the SPAS-12 fires faster than the 870P MAGNUM and it feels like it has a bit more accuracy, too – it just doesn’t do quite the damage of the 870P.

    SAIGA-12 (Criminals) = With a nice rate of fire, it feels like it does damage somewhere between the SPAS-12 and the 870P MAGNUM. **

    STAKEOUT (Cops) = With damage a bit lower than the 870P or the SPAS-12, shotgun ‘feels’ quite a bit more accurate – and with its’ nice rate of fire (for a pump-action), this beauty quickly became a Personal Favourite to run with. **

    M4 (Criminals) = With a nice rate of fire and decent damage, this cannon is quickly becoming a Personal Favourite. **

    KSG12 (Cops) = Although a pump-action shotgun, this thing hits like a horse’s hoof to the head – I dubbed this cannon the “Kiss The Ground” shotgun right away. **

    1887 = Although powerful, this old-west-style shotgun shoots slow – when compared to its’ modern-day counterparts – but it is fun to spin it end-over-end a’la Terminator 2 style to reload, once you unlock the ability to Saw Off the Stock. *

    DOUBLE-BARREL SHOTGUN = A true source of unearthly power once unlocked, the DOUBLE-BARRELLED SHOTGUN will make you feel like a living angel of death, as even one barrel’s worth will end an enemy close by; just point this finger of god at an enemy and say “die” – and as long as they aren’t too far away – they will do it for you. Worth the effort to Unlock and a Personal Favourite. **

    SA-58 OSW = I call this “The Recoil Machine”, as unless you fire one bullet at a time, you will be covered in rifle Recoil.

    SCAR-H (Cops) = This silence-able machine gun has some recoil, but it “levels out” and can be compensated for, allowing you to enjoy the high damage output and decent accuracy (especially if ‘tap-shooting’ for short bursts). *

    FAL (Criminals) = Although this rifle has a fair amount of recoil, it seems to have high damage output – if it can be compensated for, this could be a nice heavy-hitting weapon to run with. **

    HCAR (Cops) = With a medium amount of recoil, it “levels out” and can be compensated for, allowing you to enjoy the high damage output and decent accuracy (even during continuous fire, if you can control the muzzle). **

    HK51 (Criminals) = Although it has a bit of recoil, this silence-able rifle has a nice ‘smooth’ feel to it. **

    SG510 (Cops) = With a nice feeling of accuracy (aimed fire, with recoil compensated for) it also feels like a decently-hard-hitting weapon – this could be a new Personal Favourite for me. *

    M39 EMR = With a little less accuracy than the other Battle Rifles, the M39 EMR ‘feels’ a bit smoother though, with a nice rate of fire and the ability to be silenced – it’s just too bad it doesn’t have Extended Magazines available, as it always feels like it’s running out of ammo just a tad too soon. *

    M1 = The World-War-2-era M1 is a unique rifle that is fun to play and easy to use, with its’ high accuracy and unique report [sound] – if only it could be scoped (and silenced).

    Mp7 = Although this silence-able PDW shoots very fast, you have to be in Close-ish Range or else you’ll just be burning through your ammo.

    MP5SD = This pre-silenced SMG is fun as hell to use, with its’ fast firing rate, good accuracy and decent damage; I like to run this with an IRNV scope and Extended Magazines, never letting the enemy know what is raining bullets down upon them until it shows up on the Kill Log. **

    RO933 BLK = [N/A, Haven’t Unlocked Yet, sorry]

    AWS = A pre-silenced but slower-shooting, medium-to-long range rifle, with what feels like medium-ish damage, even though the in-game listing has it as “high damage” –  perhaps this one gets better after a few Unlocks, it felt pretty under-powered and a little inaccurate to me (but this could be the slower bullet speed due to the built-in silencing barrel).

    M1903 = This World-War-II-era rifle, reminiscent of Saving Private Ryan, comes ‘pre-loaded’ with a Straight-Pull Bolt (allowing you to shoot again without going out of a scope, which Unlocks in 20 kills) and can eventually Unlock a Silencer after 50 kills – but even though I read it is supposed to be powerful against vehicles, it shoots a little too slow and does too little damage to infantry, for my personal liking – maybe you’ll have better luck with it.

    MAMMOTH GUN = [N/A, Haven’t Unlocked Yet, sorry]



    SYNDICATE GUN = [N/A, Haven’t Unlocked Yet, sorry]

    A-8s = With only one arrow to fire and a looong reload time, the “Harpoon Gun” can still be a blast to play with, as it is fun as hell to kill someone with this unique weapon that won’t make you show up on the mini-map at all – it is just that you will probably die too (while reloading). **

    45T = This pistol doesn’t seem to do much damage, nor does it shoot very fast – but that slow rate of fire gives it decent accuracy.

    .40 PRO (Criminals) = While this pistol is decently accurate, it only does mediocre damage and it doesn’t fire very fast – another enemy will probably kill you before the one you are shooting at dies, unless you ‘get the drop on them’.

    M1911A1 (Cops) = While it doesn’t shoot very fast or do above medium-ish damage, this WWII-era pistol seems to be decently accurate – but it will win no awards.

    BALD EAGLE = With huge damage output, this ‘Hand Cannon’ will feel like you are wielding a hand-size shotgun – too bad it can’t be silenced or have longer scopes put on it. *

    T62 CEW = Only one word for this one-hit-disable, “non-lethal” (it counts as a ‘kill’ for Patches and Assignments) weapon that makes all others respect your authority: Fun. **

    TRACKING DART = The Tracking Dart is mainly for ‘tagging’ opponent vehicles so that they can be seen by literally everyone – and RPGs will ‘lock on’ to them too – it even works on people! *

    FN57 = While this little guy shoots fast, it doesn’t seem to do a heckuva lot of damage – getting fast headshots makes up for it though. *

    G17 Race Pistol = A great little dealer of damage, it can shoot as fast as you can click – too bad there are no options for scopes or silencers whatsoever. **

    DUAL VZ.61 = Holding two of these “Czech Uzis” akimbo, you will feel like you are in a John Woo movie – only the inaccuracy will force you to run up close to everyone – but it will be fun doing it. *

    MP5K = Fast-shooting and if you can compensate for the recoil, pretty accurate – it even works great silenced. *

    M/45 (Cops) = Not as ‘smooth’ handling as the MP5K, this SMG feels ever-so-slightly more accurate and has decent damage, to boot. *

    MPX (Cops) = A fast-shooting and fun smg to run with, it seems to have a little less recoil than the other SMGs but doesn’t ‘feel’ as accurate, if that makes any sense – it is still pretty good and if you are able to compensate for recoil, a nice gun to use. *

    K10 (Cops) = Insanely insane with an insane firing rate, it has been literally only for the insane since the Beta – and maybe those who don’t like keeping bullets in their gun – heaven help anyone if you point this at their head. **

    FMG9 = Suppress-able at 90 kills, this fast-shooting SMG ‘feels’ more accurate than its’ kindred, especially after unlocking the Laser Sight and some Scopes – and with a unique stock animation, it is a ‘fun’ weapon to run with. *

    M1A1 = Although it can never be silenced and therefore will always give your position away when you fire, you probably wouldn’t want to silence this variation on the “Tommy Gun” as it is a pleasure to listen to the unique, heavy-hitting sound this World War 2 staple makes – it is slow to reload but has a decent firing rate and decent punch. *

    SCORPION = A fast-shooting gun (almost as fast as the K10 it seems), this silence-able fella ‘feels’ ever-so-slightly less maneuverable than its’ brethren – and it does a bit less damage, too – otherwise, it would have been a Personal Favourite (I have almost unlocked the Suppressor already on it). *

    Mp7 = Although this silence-able PDW shoots very fast, you have to be in Close-ish Range or else you’ll just be burning through your ammo.

    UMP45 (Criminals) = Although slightly more accurate feeling, it also feels like it shoots slower and hurts a little less than similar weapons.

    UMP9 = Silence-able after 70 kills, this SMG ‘feels’ a little bulky to wield, but seems like it does a notch more damage than its’ counterparts. *

    UZI (Criminals) = Silence-able but unfortunately “The Uzi” in-game seems different than it does in the movies – it shoots far slower than on the big screen, but it is also more accurate here. *

    M5 NAVY (Cops) = Making you feel like you’re in your own 80’s movie, the M5 NAVY packs a punch and seems to keep accuracy even out to mid-ranges (aimed or not) – quickly making this a Personal Favourite. **

    M12S (Cops) = “The Spaghetti Uzi” ‘feels’ ‘clunky’ and a ‘bit’ ‘inaccurate’ to me, ‘but’ it seems to have a ‘few more’ bullets than ‘similar weapons’, which ‘mostly’ ‘makes up for it’, quote marks. *

    AUG PARA (Criminals) = While this Criminal-only SMG ‘feels’ like it does decent damage and is fairly accurate, it ends up being only ‘mediocre’ in… well.. Everything.

    MP5SD = This pre-silenced SMG is fun as hell to use, with its’ fast firing rate, good accuracy and decent damage; I like to run this with an IRNV scope and Extended Magazines, never letting the enemy know what is raining bullets down upon them, until it shows up on the Kill Log… **

    MX4 = Although very ‘average’ in all stats in-game, the stylish MX4 ‘feels’ like it is an efficient damage-wielding gun that is fun to use for some reason – I just kept on using it, eventually unlocking almost everything I wanted in each Attachment category, despite losing many shootouts with it.

    M1 = The World-War-2-era M1 is a unique rifle that is fun to play and easy to use, with its’ high accuracy and unique report [sound] – if only it could be scoped (and silenced).

    RO933 .300 BLK = [N/A, Haven’t Unlocked yet sorry]

    M110K5 = [N/A, Haven’t Unlocked yet sorry]

    1887 = Although powerful, this old-west-style shotgun feels slightly slow when compared to its’ modern-day counterparts – but it is fun to spin it end-over-end a’la Terminator 2 style to reload, once you unlock the ability to Saw Off the Stock. *

    AWS = A pre-silenced but slower-shooting, medium-to-long range rifle, with what feels like medium-ish damage, even though the in-game listing has it as “high damage” –  perhaps this one gets better after a few Unlocks, it felt pretty under-powered and a little inaccurate to me (but this could be the slower bullet speed due to the built-in silencing barrel).

    M1903 = This World-War-II-era rifle, reminiscent of Saving Private Ryan, comes ‘pre-loaded’ with a Straight-Pull Bolt (allowing you to shoot again without going out of a scope, which Unlocks in 20 kills) and can eventually Unlock a Silencer after 50 kills – but even though I read it is supposed to be powerful against vehicles, it shoots a little too slow and does too little damage to infantry, for my personal liking – maybe you’ll have better luck with it.


    MAMMOTH GUN = [N/A, Haven’t Unlocked yet sorry]


    SYNDICATE GUN = [N/A, Haven’t Unlocked yet sorry]

    A-8s = With only one arrow to fire and a looong reload time, the “Harpoon Gun” can still be a blast to play with, as it is fun as hell to kill someone with this unique weapon that won’t make you show up on the mini-map at all – it is just that you will probably die too (while reloading). **

    .38 SNUB = Seen in almost any cop movie between 1970 and 1990, this little guy fires fast, ‘moves’ smoothly and is nice and accurate – but it better be because you only get five shots to work with – and there are hardly any add-ons for it at all. *

    .44 MAGNUM (Criminals) = The Classic is here, from Movies to Real Life mayhem, the “fourty-four” is a hand cannon of damage to all it gets pointed at, nuff’ said. *

    .410 JURY = While not the fastest firing, this little bad boy is literally a hand-size-shotgun (it fires small shotgun-style shells) and since it is smaller than the Fourty-Four and The Eagle – but seems to blast out the damage even out to close-to-medium ranges – this weapon is fun-as-hell to run with. A Personal Favourite. **

    .357 RS (Cops) = While still a “magnum” like The Fourty-Four, it doesn’t seem to do quite as much damage – or have the range the .44 MAGNUM has – but it has a bit more ammo at 8 rounds.

    T62 CEW = Only one word for this one-hit-disable, “non-lethal” (it counts as a ‘kill’ for Patches and Assignments) weapon that makes all others respect your authority: Fun. **

    TRACKING DART = The Tracking Dart is mainly for ‘tagging’ opponent vehicles so that they can be seen by literally everyone – and RPGs will ‘lock on’ to them too – it even works on people! *

    FN57 = While this little guy shoots fast, it doesn’t seem to do a heckuva lot of damage – getting fast headshots makes up for it though. *

    G17 Race Pistol = A great little dealer of damage, it can shoot as fast as you can click – too bad there are no options for scopes or silencers whatsoever. **

    DUAL VZ.61 = Holding two of these “Czech Uzis” akimbo, you will feel like you are in a John Woo movie – only the inaccuracy will force you to run up close to everyone – but it will be fun doing it. *

    R0933 = With a high rate-of-fire and equipped with a few little add-ons ‘out of the box’, the RO933 ‘feels’ smooth and easy-to-use, even if it isn’t the fastest killer. *

    AKS74U (Criminals) = With a notch up in damage and a couple notches up in accuracy from the RO933, the AKS74U ‘just feels right’. **

    G36C (Cops) = Having not seen a “G36C” myself since BF3, this felt like it’s ‘little brother’ – a ‘smooth’ to maneuver with, compact, pretty accurate gun. *

    SG553 (Cops) = With the highest average in-game stats than the other Carbines, this weapon should “kick criminal butt” – and that, it does (especially with some Add-ons). A Personal Favourite.**

    CAR-556 = Packing a wallop of hit damage and feeling pretty accurate, even at range in short bursts, I have no idea why I can’t ‘get into’ using this gun more – perhaps it is the ‘harsh’ sound it makes? LOL *

    ACWR = While the in-game stats show it as fairly inaccurate, I found the ACWR to do decent damage, ‘feel’ smooth to use – and do a nice bit of hurt to the enemy (even at range if you can compensate for the bit of recoil). *

    AKM (Criminals) = If you can deal with the huge amount of recoil this gun has, it does seem to have a pretty accurate, crazy-damage, first shot and high-damage short bursts – other than that, it is actually ‘average’ in all stats, in-game.

    M16A3 (Cops) = Accurate and with a fast firing rate, silence-able and reminiscent of “movie M16s”, there isn’t much to not like about this weapon. A Personal Favourite. **

    M416 (Criminals) = This carbine ‘feels’ like it handles a lot smoother than the AKM, feeling more accurate as well, even though the in-game stats are comparable.

    ARM = [N/A, Haven’t Unlocked Yet, sorry]

    L85A2 = With a bit of recoil already, it is accentuated by the pre-loaded 4X scope it comes with – but if you are just ‘runnin-and-gunnin’ with it, it feels like a formidable weapon up close – it just seems to have accuracy problems (bullet spread) at anything other than point blank range.

    MDC (Cops) = With what seems like a high amount of recoil and inaccuracy, the MDC doesn’t seem to live up to its’ stylish look – it ‘feels’ a bit worse than the L85A2, in regards to ‘handling’.

    FAMAS = While quite inaccurate if you just ‘spray-n-pray’, aiming seems to help a lot with this rifle – it ‘felt’ a lot better too, after Unlocking the Extended Magazine – and it seems like it could only improve from there.

    F2000 (Criminals) = This huge wall of metal feels like you are carrying a rocket launcher, but with its’ fast firing rate and decent accuracy, there’s not much to dislike about it – other than it doesn’t seem to ‘hit’ as hard as I would have expected . *

    SAR-21 = In-game, the stats on this weapon are very ‘average’ – and it ‘felt’ that way, except for the accuracy which, especially if you can compensate for it, seems ‘high’, actually – and it only seemed to get better as I Unlocked more Attachments. *

    RPK (Criminals) = With a large magazine size (50) and how this gun ‘feels’ heavy-hitting, while a bit inaccurate at first, I think it can be a formidable weapon after some Unlocks.

    RPK-74 = While comparable to the RPK (of course), the ‘74 ‘felt’ a little more accurate, actually. *

    AUG A3 = The AUG A3 already ‘felt’ pretty accurate, but with ‘included’ 4X scope and if you can compensate for the recoil, it is a pleasure to shoot – too bad it doesn’t seem to do high damage (but about a ‘medium’ amount). *

    M1A1 = Although it can never be silenced and therefore will always give your position away when you fire, you probably wouldn’t want to silence this variation on the “Tommy Gun” as it is a pleasure to listen to the unique, heavy-hitting sound this World War 2 staple makes – it is slow to reload but has a decent firing rate and decent punch. *

    Mp7 = Although this silence-able PDW shoots very fast, you have to be in Close-ish Range or else you’ll just be burning through your ammo.

    MP5SD = This pre-silenced SMG is fun as hell to use, with its’ fast firing rate, good accuracy and decent damage; I like to run this with an IRNV scope and Extended Magazines, never letting the enemy know what is raining bullets down upon them until it shows up on the Kill Log. **


    M110K5 = [N/A, Haven’t Unlocked Yet, sorry]



    1887 = Although powerful, this old-west-style shotgun feels slightly slow when compared to its’ modern-day counterparts – but it is fun to spin it end-over-end a’la Terminator 2 style to reload, once you unlock the ability to Saw Off the Stock. *

    AWS = A pre-silenced but slower-shooting, medium-to-long range rifle, with what feels like medium-ish damage, even though the in-game listing has it as “high damage” –  perhaps this one gets better after a few Unlocks, it felt pretty under-powered and a little inaccurate to me (but this could be the slower bullet speed due to the built-in silencing barrel).

    M1903 = This World-War-II-era rifle, reminiscent of Saving Private Ryan, comes ‘pre-loaded’ with a Straight-Pull Bolt (allowing you to shoot again without going out of a scope, which Unlocks in 20 kills) and can eventually Unlock a Silencer after 50 kills – but even though I read it is supposed to be powerful against vehicles, it shoots a little too slow and does too little damage to infantry, for my personal liking – maybe you’ll have better luck with it.

    MAMMOTH GUN = [N/A, Haven’t Unlocked Yet, sorry]



    SYNDICATE GUN = [N/A, Haven’t Unlocked Yet, sorry]

    A-8s = With only one arrow to fire and a looong reload time, the “Harpoon Gun” can still be a blast to play with, as it is fun as hell to kill someone with this unique weapon that won’t make you show up on the mini-map at all – it is just that you will probably die too (while reloading). **

    92FS = Silence-able but not the fastest-shooting pistol, nor the most damaging – it does seem accurate though, if you can compensate for the recoil – maybe it would become something worthwhile after some Unlocks.

    P226 (Cops) = Although fairly fast-firing, it is somewhat inaccurate – I would say it is the ‘slightly faster but less accurate version of the Criminals-only CZ-75’ if I had to compare it.

    CZ-75 (Criminals) = Although fairly accurate, it is somewhat slow-firing – I would say it is the ‘slightly slower but more accurate version of the Cops-only P226’ if I had to compare it.

    G17 = Nicely accurate and firing as fast as you can click, it seems, the G17 became an instant Personal Favourite. **

    FN57 = While this little guy shoots fast, it doesn’t seem to do a heckuva lot of damage – getting fast headshots makes up for it though. *

    G17 Race Pistol = A great little dealer of damage, it can shoot as fast as you can click – too bad there are no options for scopes or silencers whatsoever (other than the red dot sight it comes with). **

    T62 CEW = Only one word for this one-hit-disabling “non-lethal” (it counts as a ‘kill’ for Patches and Assignments) weapon that makes all others respect your authority: Fun. **

    TRACKING DART = The Tracking Dart is mainly for ‘tagging’ opponent vehicles so that they can be seen by literally everyone – and RPGs will ‘lock on’ to them too – it even works on people! *

    DUAL VZ.61 = Holding two of these “Czech Uzis” akimbo, you will feel like you are in a John Woo movie – only the inaccuracy will force you to run up close to everyone – but it will be fun doing it. *

    M67 FRAG = With decent range, ‘The Poison Apple’ does huge damage – I think it’s killzone has been increased since Beta – a room-clearer (as long as they are in line-of-sight), but you only get one. *

    M18 SMOKE = While it doesn’t damage anyone, it does provide some good ‘cover’, as it blocks not only seeing people but also spotting.

    M84 FLASHBANG = While sounding very useful at first, with the faster pace and highly mobile opponents in the convoluted spaces of Hardline, having an effect with this is rare – although I have had it used on me and have seen people not able to see well for the short time it is in effect (looking around or shooting aimlessly) – it is very rare to be helpful it seems, but it happens.

    GAS GRENADE = Quite useful, as it blurs the view of the enemy (affecting their aim as well) and sometimes a killer (albeit slowly) – unless you want to be affected yourself, put on a Gas Mask Gadget. **

    INCENDIARY GRENADE (Cops) = Create your own “Napalm Pond” with this grenade-of-fire, which has a good range and good ‘spread’ (the area of effect is fairly big) – the only drawback is that people have to stay in it for a bit to die and some could have Fire Resistance Masks to nullify it (but that is only the Operator Class and only if they have the Robbery Expansion/DLC). *

    MOLOTOV (Criminals) = The ‘homemade’ version of the Incendiary Grenade, it has the same area of effect and does the same damage, it seems – and could be nullified by the FR Mask (but as above, that is only the Operators and only if they have the right Expansion/DLC). *

    THROWING KNIFE = Slightly slower to deploy and slower to travel than expected, these types of knives are fairly heavy [in real life, I used to own one when I was younger] so they have some drop to account for; but your opponent will die when one knocks them over, making these little guys fun as heck to use. **

    BASEBALL BAT (Criminals?) = No matter where you grew up in the world, you will know how to wield a wooden stick – which means this guy can come out fast and keep on swingin’ – do it from behind for a Takedown. *

    POLICE BATON (Cops) = A staple of Authority worldwide and resembling the Japanese ‘Tonfa’, this bad boy will knock out a perp in two hits if you don’t take him down from behind. **

    NIGHTSTICK (Cops) = Like a Police Baton without the little handle, the Nightstick feels fast to use, if a bit mundane to look at.

    BLACKJACK (Cops) = Although still small and slim, this little guy feels ever-so-slightly slower than the other ‘sticks’, for some reason.

    COLLAPSIBLE BATON (Cops) = I had no idea there would be such a long delay to deploy this little fella, since he’s so short…but don’t worry he becomes longer.

    SHOVEL = As a farming tool, I feel that it has a sufficiently-long delay time to whip-it-out… and that’s enough double entendre for now.

    GOLD CLUB (Criminals?) = Feeling like it wields ever-so-slightly slower than say, a baton or bat, it is still wicked fast – and you can do a non-lethal takedown (from behind), to Interrogate the enemy (finding out their positions on the map). *

    LEAD PIPE (Criminals?) = Quick to draw and with a somewhat-satisfying ‘clunk’ when you hit an opponent, this guy is fast becoming a Personal Favourite. *

    SLEDGE HAMMER (Criminals) = Slow and heavy to draw, this baby packs a mean punch once it does show its’ presence on the battlefield – a one-hit kill, it also takes down doors and crumbles thin walls with ease. *

    BREACHING HAMMER (Cops) = The lawful version of a Sledgehammer, this big boy is also slow and heavy – but it forces others to ‘respect your authoritah’ once drawn as it one-hit-kills and takes down doors and thin walls with ease. *

    CROWBAR (Criminals?) = If you’ve lived in any industrialized country for a time, you know what a crowbar is and what it can do – and while not seeming quite as quick-to-deploy as say, a bat or a baton, the muffled ‘donk’ sound it emits when hitting someone makes this weapon a pleasure to work with. **

    KNIFE = Fast and deadly, nuff’ said.

    SHANK = A weapon born out of necessity, the Shank is fast and deadly and other speedy and dangerous words… you get the point – or rather, they will. *

    BOWIE KNIFE = This classic weapon, interestingly named after an owner (not its designer) feels ever-so-slightly slower than its’ other bladed brethren.

    CARBON FIBER = Although sleek and stylish looking, there is an ever-so-slight delay to deploy this bad boy – but it does seem to have a unique takedown animation that can happen.

    SCOUT = A fast knife that will cover your hands in blood if repeatedly wielded in a cluster of enemies.

    SEAL = It feels ever-so-slightly slower than say, the Scout Knife, but it is still ‘wicked bad’, as it should be.

    SURVIVAL = With an animation similar to the Bowie from the back and a seemingly-unique kill animation from above [that I have seen so far], this knife works well, even if it does seem ever-so-slightly slower than the other knives, for some reason.

    TRENCH = With a ‘side animation’ similar to the Shank and a ‘front animation’ similar to the Bowie [that I have seen so far], the look of this fella makes it a touch more satisfying to kill with. *

    ACB-90 (Criminals?) = With side-killing animations similar to the Shank and rear-killing animations similar to the Bowie [that I have seen so far], it does seem to deploy pretty quickly. *

    DEVIL’S TOOTHPICK = The motions for using this ‘asylum invention’ on people are more ‘hectic’ and seem to shout “mayhem” (you stab less and hack more, it appears).

    FIRE AXE (Cops?) = Live out your Team Fortress 2 “killing people who make W+M1 jokes” Pyro urges, or perhaps your childhood dream of being a “Firemans” (or a “Firelady”) with this slow-to-wield but ‘kick-axe’, axe. *

    MACHETE = This traditional and practical knife seems to deploy quite slowly – although it does great damage and appears to kill in one hit [so far].

    CLEAVER = While not as slow to use as say, the Machete or Axe, it is still “medium-slow”, a lethal takedown (even from behind) – but it doesn’t seem to have any ‘unique’ animations [that I have seen so far].

    KARAMBIT = Fast and Deadly, there really is nothing else to say about this ‘little devil’ other than those two words – really, I’m not just being lazy here. *

    INQUISITION SWORD = Slow and Heavy to wield – but a one hit kill as you overpower your foe – be sure to shout “There Can Be Only One” in real life when you use it for maximum fun-ness. **

    When the Betrayal Expansion was released in March of 2016, a Battlelog Post stated: “Now that various weapons have been released to all classes with the base game update, you can pair a Mechanic with a sniper rifle, or an Enforcer with an SMG. You might not be as effective as you would with your class weapon, but the option is there.” Meaning, if you are utilizing a Weapon that is normally ‘outside’ of your Class, you will be using it with reduced effects!

    Again, as stated above, I would like to do the Gadgets (Class Special Tools) as well, sometime in the future – but for now, enjoy these little summaries of the Main Weapons available, to give you an idea of them if you are a newer player, or to help you in finding something that fits your playstyle (eg. ‘slow and hard-hitting’ or perhaps ‘fast-shooting with lighter damage’, and so on) – hopefully this information will help you out in some way. Enjoy – get in there for the Double XP Event on now – and See You In The Game!

    Monitoring weight loss

    There are two schools of thought on how to monitor weight loss:

    • Daily weighing
    • The once-weekly weigh-in.

    This is an individual issue. If you are the sort of person who needs a daily date with your weighing scales, then by all means do so. Keep a record of your progress using a chart like the one opposite. You may see weight-shifting patterns emerging and be able to isolate foods that have a negative effect on your weight. If you prefer the surprise-at-the-end-of-the-week, that is fine too. You should still keep a record and watch out for any plateaux where weight loss dries up, which may mean that you need to lower your carbohydrate levels or increase your physical activity.

    Whichever your preferred monitoring method, keep a tight-fitting pair of trousers or other item of clothing and try them on regularly to establish how your shape is changing. Your weight may stabilize for a while, and if you are exercising regularly and increasing your muscle-to-fat ratio you may even may weigh slightly more for a bit, but you will be fitter and – in the end – leaner.

    Diet Start

    TOP ANTI-SNACKING TIPS

    • Try not to snack while watching television, playing video games or using the computer. Eat meals and snacks in the kitchen or dining room, so that you are more aware of what- and how much — you are eating.
    • When you feel a snack attack coming on, run a bath, go for a walk, ring a friend… Do anything that will keep you away from the refrigerator.
    • Don’t go shopping when you are hungry — it is then that you may reach out for that chocolate bar.
    • If you are going to snack, make sure it is a protein snack.

    Dietary demons – and how to beat them

    1. Not so well-meaning friends and family members: one of the mostdifficult things to deal with is the friend or relative who tries to sway you off-course. Don’t be bullied into breaking your resolve. Decline politely andexplain that you are relying on them for support. If you are visiting them,take a whey-protein smoothie with you.
    2. Boredom: you shouldn’t get bored following the plans,because there are so many different things to eat and ways to prepare your food. Even if you aren’t a natural cook, experimenting in the kitchen willkeep you motivated.
    3. Alcohol: you are allowed a couple of glasses of wine when you start the
    4. Keep on Tracking Plan, but don’t be tempted to have more. There is nothing like a little extra alcohol to persuade you that you’ll start againtomorrow. Avoid the ‘drunken munchies’.
    5. Snack attacks: the three dietary plans allow for a couple of high-proteinsnacks each day between meals, but you could easily undermine all your efforts by hitting the biscuit jar in a moment of weakness. Clear out anything vaguely tempting from your refrigerator and cupboards, and be very carefulat times when you normally seek comfort food.

    Curb your cravings by curbing your carbs

    When you start eating more healthily and reducing the amount of potentially addictive carbohydrate-laden foods, you should find that your cravings begin to diminish as your blood-sugar and insulin levels even out. This will usually take about 48 hours when you start the Fast-Track Plan. If you do get a ‘snack attack’, try making yourself a whey- protein smoothie; or keep a plate of cold chicken in the refrigerator for weak moments. You can’t necessarily kill a craving, but you can wrestle it into submission.

    Georgia Bloggers Blog Hop

    It’s time to teach the country about yes ma’am and ya’ll.
    Down here in Georgia, we talk with a drawl.
    We’re bringing you some freebies as sweet as our tea.
    Enter our contest, you might get some things free!


    I moved to the Atlanta area eight years ago when my husband decided to go to law school at Emory. It didn’t take long for us to decide that we’d say goodbye to the cold Michigan winters and make Georgia our permanent home. 


    We eventually settled in Decatur, a quaint suburb of Atlanta, and we love our little town. Decatur has more festivals than any town I know, and we have a thriving downtown with local shops, concerts, and amazing restaurants. We’re minutes from downtown Atlanta, but we’ve somehow captured a small town feel, and I love it. 

    Image of Concerts on the Square in Decatur via visitdecaturga.wordpress.com

    This weekend, we’ve paused from our peach picking to give you a taste of Georgia. Twenty-five teachers invite you to take a road trip through our southern state. Hop through our blogs to get freebies.
                                              
    This weekend only, I’m giving away my Standards for Mathematical Practice posters from TpT for FREE! You can pick up mine just by clicking here. 



    My entire TpT store will also be 20% off this weekend only — June 20-22, so check it out! 

    We’d also like to give you a chance to win a bushel basket full of our products. To enter from my page, you just need to follow my blog on Bloglovin’. Already do that? I’d also love for you to follow by email in the link at the top! You can enter once from each person’s blog.

    a Rafflecopter giveaway

    a Rafflecopter giveaway

    So what are you waiting for?! Time’s a wastin’. Go get more free stuff and sign up to win!

    An InLinkz Link-up

    Wauconda WORKOUT ANYTIME Opening Doors Soon

    Wauconda WORKOUT ANYTIME Opening Doors Soon

    The new Wauconda WORKOUT ANYTIME, owned by Jeff Cercy will be opening their doors by the end of the week. The club, located on Liberty Street in the Jewell Osco shopping center, will be celebrating their grand opening on March 22nd. The equipment is all in place and the final touches on flooring and painting has all been completed.

    The public is welcome to come out and see the new club. Those interested in joining can call 847-526-4088 or register on the club’s website: http://workoutanytime.com/locations/wauconda.

    Who needs to curb the carbs?

    It goes without saying that everyone should consider cutting out refined sugar and flour products, plus high levels of processed foods that are full of junk fats, as they are nutritionally redundant in the human body. You should also consider giving up caffeine and moderating your alcohol intake, particularly if you suffer from any of the symptoms of unstable blood sugar and insulin resistance.

    Many people are not even aware of the symptoms of eating too many refined and dense carbohydrates. They have become used to living in what I call ‘the discomfort zone’. They have forgotten what it is like to wake up full of energy, think it’s normal to feel bloated after meals and rely too heavily on stimulants such as coffee to get themselves through the day.

    Diet Start

    This sorry state of affairs becomes their normal state of being — it is no wonder that the symptoms of degenerative disease creep up on many people un-noticed. They are so used to living below their physical potential that they don’t recognise the signs until it is sometimes too late.

    If you are more genetically disposed to gain weight readily when exposed to an unhealthy diet and lifestyle then restricting the amount and type of carbohydrate foods that you eat may be the right choice for you. Such a diet regime may also suit you if you have developed insulin resistance as the result of a diet based on high levels of refined and complex carbohydrates that outweigh your energy requirements, plus too much saturated fat, with little fibre and water. Unless, that is, you are one of those people who leads an active lifestyle or has a high metabolic rate, and already eats a diet with relatively high levels of healthy complex carbohydrates (brown rice, potatoes, wholegrains and certain vegetables, fruit and pulses) without accompanying weight and health problems. If so, why are you reading this? Sounds like you are already doing what is right for your body.

    Battlefield Hardline: A Double XP Boost is Currently Active! [Notification]

    Just a quick post to notify those interested in Hardline that a Double XP Boost is Currently On! GOGOGO http://battlelog.battlefield.com/bfh/

    See You In The Game!

    reACT Trainer Total Body Circuit Workout

    One of the best tools we have at our disposal at Workout Anytime is the reACT Trainer.  Staff who know how to use the product properly and teach others to use it can make a great impression on any member or guest and help to differentiate their club from competitors.

    Although the reACT Trainer is a lower body and core trainer it is easy to create full body circuits using the reACT Trainer along with the key upper body movements including:

    Horizontal Press (chest press of some type)

    Horizontal Pull (Row of some type)

    Overhead Press

    Vertical Pull – (some type of vertical pulling movement)

    Here is a sample reACT Trainer Total Body Circuit:

    Raw Gameplay (Unedited) – Battlefield Play4Free (32 Players, Saiga-12 Won from The Daily Draw)

    Battlefield Play4Free is a Free-To-Play title, where it doesn’t cost anything to join in, but you can purchase weapons, armor, clothing and other items for Real Money by purchasing Tokens that you can then use in the in-game Store. There is also a nice feature where you can win prizes (weapons, armor, clothing, etc) from a game called The Daily Draw, where you choose a card from a draw of eight and it will generate an item for you.

    The items range from temporary one-day use weapons and clothing, to seven day usage, to permanent items your character (Soldier) can use in the game forever (for example, a scope that can be attached to a gun for that soldier for all time). This is great for those who can’t afford to purchase many in-game items, as it not only offers the possibility of getting some great gear ‘forever’, it also gives a nice preview of a weapon, mod or clothing, so that you can see what it will look like/feel like, if you decide to splurge and purchase it for yourself (supporting the game and developers as well) sometime in the future.

    In this video, I present ‘Raw Gameplay’ (unedited gameplay) of BFP4F after winning a Saiga-12 Shotgun for one day’s usage on my Medic via The Daily Draw. I had joined a 32-player server (running a Rush map) that was nice and full (16 soldiers per side). After getting the kinks out and getting used to the controls again after not playing for a while, I think things picked up as the game went on.. I was soon having fun arming MCOMs and healing and reviving. Near the end, I realized that my Aircraft controls weren’t set/got reset, as my mouse wasn’t ‘inverted’ and I couldn’t fly the helicopter at all, haha.

    Recorded game: Battlefield Play4Free, Online FPS
    Recorded with: Bandicam (Registered Version) @ 864p
    Recording codec: MPEG-1, 70% Quality, 30fps

    This video was also a test of a few things (though not an ‘Official Testing Video’): I was messing around with different settings (resolutions, quality settings) to see how low I could set things before the quality suffered too much. This is of course, something VERY relative and what looks ‘good enough’ to one person, looks ‘like crap on a cracker’ to another person. What I was testing here was, what seemed good enough to upload to YouTube (since it recompresses anyway) and still be enjoyable, while making the recorded file as small as I could via Quality settings (which limits the bitrate somewhat) and resolution size (the larger the resolution, the more bitrate/filesize that would be required).

    As I have stated in earlier articles talking about Quality, Bitrate and Filesize, I still find that going below 60% produces too many compression artifacts (macroblocks and ‘trails’, Gibbs effects and more) for many games, especially if there are large dark areas (which would get compressed more highly and have these compression effects occur in them). This doesn’t happen with all games however; some games are fast-moving and/or do not have many darker/flatter areas and using 50% quality doesn’t look too bad, even with the MJPEG codec. It’s a balancing and testing game, as some games (especially with text) look fine and others look very bad (the compressor will try to allocate more bits around edges like text and compress even more highly then, the flatter/darker areas in a scene). I have done recordings of news streams and other things however, that allow for a very low quality recording setting (down to 20%), but that is mainly because the source itself is of a low quality (many streams are highly compressed and there is not much ‘extra’ compression artifacts produced by recording it in a lower quality/bitrate, especially if you are going to downsize for the final output video).

    For most games, I found I could go down to 70% Quality comfortably – as long as the resolution stayed ‘higher’ [720p or higher]. With lower resolutions, the bitrate/quality reduction means too many ‘casualties’, as 30% of a 1080p recording isn’t that many pixels when you consider the screen size; but one-third of a 480p recording is a huge amount of the already small screen being ‘lost’ to compression. Thus, with some testing (again to what looks “ok to me“) I arrived at a middle ground of 864p, which maintains decent clarity of text and is large enough to discourage overcompression of darker/flatter areas. For keeping recorded files small and downsizing to 720p HD, it looked fine to me in tests – and on some games, doesn’t look that bad even if you wanted to upsize to 1080p HD (clear text was maintained, etc).

    So, enjoy this first installment in an ‘unofficial’ Video Series here at The Game Tips And More Blog: “Raw Gameplay” of Battlefield Play4Free. If you like the game, play it, tell others about it and buy some stuff from the Online Store and support it!

    See You In The Game!

    Any gameplay videos or animations uploaded are only one example of one possible path of game play and is not representative of the gameplay experience of the entirety of the game material as it is non-repeatable in exactness (movements, actions, viewpoints, etc) to a high degree of accuracy (especially in regards to online multiplayer play and interactions) and therefore is not a representation of a large portion of the game content (this includes complete Walkthroughs/Playthroughs, Raw Gameplay Footage and Tutorials). All material and content uploaded attempts to respect copyright and is presented for Educational and Entertainment purposes only, utilized under Fair Use and can be construed as Free Advertising. No copyright infringement is intended and cannot be inferred. Any possible representation approaching any infringement, to those seeking infringement action, requires double notification and will be honoured by permanent removal of the infringing material.

    Mt Trip to Manila, Philippines cont……..

    I returned to Colombo on the 19th morning without any delays. On the way I met one of my colleagues at Bangkok airport and that helped pass the time as well as chat on the plane.

    I found an interesting article on the web regarding “don’t know that you don’t know” I found the article to be spot on and very helpful in understanding this phenomenon. http://www.doceo.co.uk/tools/knowing.htm Now I can start to develop some strategy to work around this problem so that I am better prepared to face such an issue the next time around.

    I finished documenting the results of the workshop in Manila and sent the results for comments from the client. I am still waiting for the results. Hope I am able to finish this assignment this week as it has the potential to get delayed and get ugly.

    In terms of my future travel plans there are no assignments where I need to travel overseas at present. The assignments I have lined up are in Colombo. However things can change very quickly.

    Food Repair Guide: Baking Part 2

    Swiss roll

    If you are making a Swiss roll, then line the tin with greaseproof paper, but do ensure that you grease the paper well before pouring in the mixture. Try also to ensure that the oven shelf is level or all the mixture will run to one side. If it does, all is not lost, although it will be rather difficult to roll. When you turn the Swiss roll out, do so onto a tea cloth or piece of greaseproof paper that has been coated well with icing sugar. If not well sugared, the Swiss roll will stick to the cloth or paper and you will have a terrible time rolling it. If you have not greased the paper properly, you will also have a terrible time peeling it off, but patience will usually win the day. Do not worry if the roll is not entirely perfect. As long as you can keep about one third of it intact, that will do for theoutside and no one will see the inside. Dredge it thoroughly with sugar or icing sugar. Or, if it has really fallen apart, pre-slice it before serving so that no one can see.

    Failed sponge cake

    If, despite your best endeavours, your sponge cake, be it light or rich, is dry, crumbly, flat, lumpy or generally unappealing, do not throw it out. If you are desperate for a complete cake or dessert, cut the sponge into very thin layers, sprinkle each with a little liqueur if for a dessert, and layer very generously with filling so that the cake gets smothered. Then top or ice equally generously and no one will ever know. If you do not need the cake too urgently, keep it to make trifles, tipsy cakes or anything that needs a sponge base. Buried deep enough and soaked comprehensively enough, even the most revolting cake will become quite palatable. Alternatively, crumble it and use it as a topping. When toasted, the crumbs can be used as decoration for almost anything in need of disguise.

    Diet Start

    This does not apply only to plain sponges. Orange or lemon sponges would be a delicious base for any cream dessert, chocolate, coffee or even gingerbread can be used as a base for ‘a trifle with a difference’. Indeed, coffee and chocolate cake could be sliced into fingers, thoroughly dried out in the oven and sandwiched together with some butter icing as biscuits. Any of the above could be used as the base for a baked pudding, but remember that the cake will be sweeter than bread or rice so reduce the amount of sugar.

    Failed fruit cakes

    Failed fruit cakes are just as adaptable.

    Rich fruit cakes often get old and dry out. Do not abandon them to the birds. Cut deep slits in the top of the cake and feed with a mixture of